高寒地区废石破碎胶结充填体强度特性试验研究与工业应用

doi:10.13722/j.cnki.jrme.2015.01.015

Abstract
Figure/Table
References
Related Citation (15)

Download: PDF (795 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Cemented backfilling technology has been increasingly used in the exploitation of mineral resources under the low temperature condition，but it has also brought about a series of difficult issues，such as the problem of poor strength of backfilling materials，the collapse and the failing. The effects of the curing temperature，the cement content and the slurry concentration on the strength of backfilling materials were thus studied experimentally to tackle the problems faced in a gold mine at cold region. The rational proportions of mixed material contents and the curing temperature of paste of cement-rock debris mixture were determined to meet the requirement of gravitational transportation. The experimental results revealed that the cemented rock debris was better than the iron ore tailings as the backfilling material and its slurry concentration reached to 75%. The low temperature was found to hinder the hydration. The higher the curing temperature was，the higher the uniaxial compressive strength (UCS). The increasing of curing temperature improved the strength of backfilling material. The curing temperature influenced more on the early strength but little on the later strength of backfilling material. The heated water for rock debris mixing and cementation was therefore proposed and applied successfully in an industrial experiment.

Key words： mining engineering curing temperature rock debris mixed proportion uniaxial compressive strength(UCS)

Received: 25 December 2013

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors

Cite this article:

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2015.01.015 OR https://rockmech.whrsm.ac.cn/EN/Y2015/V34/I1/139

[1] 陈杰，杜计平，张卫松，等. 矸石充填采煤覆岩移动的弹性地基梁模型分析[J]. 中国矿业大学学报，2012，41(1)：14–19.(CHEN Jie，DU Jiping，ZHANG Weisong，et al. An elastic base beam model of overlying strata movement during coal mining with gangue backfilling[J]. Journal of China University of Mining and Technology，2012，41(1)：14–19.(in Chinese)) [2] 蔡嗣经. 矿山充填力学基础[M]. 北京：冶金工业出版社，2009：1–3.(CAI Sijing. Mine filling mechanics foundation[M]. Beijing：Metallurgical Industry Press，2009：1–3.(in Chinese)) [3] BELEM T，BENZAAZOUA M. Design and application of underground mine paste backfill technology[J]. Geotechnical and Geological Engineering，2008，26(2)：147–174. [4] 张吉雄，李剑，安泰龙，等. 矸石充填综采覆岩关键层变形特征研究[J]. 煤炭学报，2010，35(3)：357–362.(ZHANG Jixiong，LI Jian，AN Tailong，et al. Research on the deformation characteristics of waste filling fully mechanized mining mantle rock critical zone[J]. Journal of China Coal Society，2010，35(3)：357–362.(in Chinese)) [5] 余伟健，王卫军. 矸石充填整体置换“三下”煤柱引起的岩层移动与二次稳定理论[J]. 岩石力学与工程学报，2011，30(1)：105–112.(YU Weijian，WANG Weijun. Strata movement induced by coal-pillar under three circumstances exchange by gangue backfill and quadratic stability law[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(1)：105–112.(in Chinese)) [6] HASSANI F P，MORTAZAVI A，SHABANI M. An investigation of mechanisms involved in backfill-rock mass behavior in narrow vein mining[J]. Journal of the South African Institute of Mining and Metallurgy，2008，108(8)：463–472. [7] HU R L，YUE Z Q，WANG L C，et al. Review on current status and challenging issues of land subsidence in China[J]. Engineering Geology，2004，76(1)：65–77. [8] RANKINE R，PACHECO M，SIVAKUGAN N. Underground mining with backfills[J]. Soils and Rocks，2007，30(2)：93–101. [9] 黄艳利，张吉雄，张强，等. 充填体压实率对综合机械化固体充填采煤岩层移动控制作用分析[J]. 采矿与安全工程学报，2012，29(2)：162–167.(HUANG Yanli，ZHANG Jixiong，ZHANG Qiang，et al. Strata movement control due to bulk factor of backfilling body in fully mechanized backfilling mining face[J]. Journal of Mining and Safety Engineering，2012，29(2)：162–167.(in Chinese)) [10] 刘志祥，李夕兵，赵国彦，等. 充填体与岩体三维能量耗损规律及合理匹配[J]. 岩石力学与工程学报，2010，29(2)：344–348.(LIU Zhixiang，LI Xibing，ZHAO Guoyan，et al. Three-dimensional energy dissipation laws and reasonable matches between backfill and rock mass[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(2)：344–348.(in Chinese)) [11] FALL M，BELEM T，SAMB S，et al. Experimental characterization of the stress-strain behaviour of cemented paste backfill in compression[J]. Journal of Materials Science，2007，42(11)：3 914– 3 922. [12] THOMAS E G. Characteristics and behaviour of hydraulic fill material[Ph. D. Thesis][D]. Queensland：University of Queensland，1969. [13] POKHAREL M，FALL M. Combined influence of sulphate and temperature on the saturated hydraulic conductivity of hardened cemented paste backfill[J]. Cement and Concrete Composites，2013，38(7)：21–28. [14] FALL M，BENZAAZOUA M，SAA E G. Mix proportioning of underground cemented tailings backfill[J]. Tunnelling and Underground Space Technology，2008，23(1)：80–90. [15] FALL M，BENZAAZOUA M. Modeling the effect of sulphate on strength development of paste backfill and binder mixture optimization[J]. Cement and Concrete Research，2005，35(2)：301–314. [16] FALL M，CÉLESTIN J C，POKHAREL M，et al. A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill[J]. Engineering Geology，2010，114(3)：397–413. [17] 赵国彦，周礼，马举，等. 低温高寒环境下尾砂胶结充填体强度特性研究[J]. 矿冶工程，2013，33(3)：24–26.(ZHAO Guoyan，ZHOU Li，MA Ju，et al. Study on strength properties of cemented tailings backfill under low temperature condition[J]. Mining and Metallurgical Engineering，2013，33(3)：24–26.(in Chinese)) [18] 赵国彦，马举，彭康，等. 基于响应面法的高寒矿山充填配比优化[J]. 北京科技大学学报，2013，35(5)：559–565.(ZHAO Guoyan，MA Ju，PENG Kang，et al. Mix ratio optimization of alpine mine backfill based on the response surface method[J]. Journal of University of Science and Technology Beijing，2013，35(5)：559–565.(in Chinese)) [19] 韩斌，吴爱祥，王贻明，等. 低强度粗骨料超细全尾砂自流胶结充填配合比优化及应用[J]. 中南大学学报，2012，43(6)：2 357–2 362. (HAN Bin，WU Aixiang，WANG Yiming，et al. Optimization and application of cemented hydraulic fill(CHF) with low strength aggregate and extra fine grain full tailings[J]. Journal of Central South University，2012，43(6)：2 357–2 362.(in Chinese)) [20] 乔登攀，姚维信. 金川矿山废石–全尾砂高浓度充填工艺试验研究[J]. 有色金属科学与工程，2011，2(6)：57–61.(QIAO Dengpan，YAO Weixin. High concentrated filling process of waste rock and total tailings[J]. Nonferrous Metals Science and Engineering，2011，2(6)：57–61.(in Chinese))