加肋土工膜表面形态与界面剪切强度相关性研究

doi:10.13722/j.cnki.jrme.2014.1218

Abstract
Figure/Table
References (15)
Related Citation (15)

Download: PDF (501 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study how the surface feature of reinforced geomembrane affects the reinforced geomembrane and geotextile interface shear strength，the fractal dimension D was calculated by cubic covering method and fractal geometry theory. Basing on the direct shear test，the correlation between the fractal dimension D and the shear strength of different reinforced geomembrane was gotten. It shows that the interface shear strength increases with the increase of fractal dimension D strengthen，so that fractal dimension could measure reinforced geomembrane and geotextile interface shear strength. And then，after revising the JRC-JCS model combined with inosculation ratio-JMC and experience factor ，the connection between the joint roughness coefficient(JRC) and the fractal dimension D was worked out with the shearing text，on the basis of which the experiential estimative equation of reinforced geomembrane and geotextile interface was derived. Finally，the calculation results were carried out with the experiential estimative equation，the comparison between the calculation results and the shear test results was conducted. Form the comparison，it shows that calculation results fit in with the test results，and the calculation accuracy and the achieved reliability of the equation can meet the requirements of engineering estimate.

Key words： soil mechanics reinforced geomembrane fractal dimension JRC-JCS model interface shear strength

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GAO Junli
	LI Jing
	ZHANG Mengxi

Cite this article:

GAO Junli,LI Jing,ZHANG Mengxi. STUDY OF CORRELATION BETWEEN SURFACE FEATURE OF REINFORCED GEOMEMBRANE AND INTERFACE SHEAR STRENGTH[J]. , 2015, 34(S2): 4387-4393.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2014.1218 OR https://rockmech.whrsm.ac.cn/EN/Y2015/V34/IS2/4387

[1] 孔祥辉. 结构面表面形态与力学性质相关性研究[硕士学位论文][D]. 武汉：长江科学院，2008.(KONG Xianghui. Study on correlation between surface feature of structural plane and mechanical property[M. S. Thesis][D]. Wuhan：Yangtze River Scientific Research Institute，2008.(in Chinese))

[2] WU J M，MABTAB A，XU S L. Estimation the Barton equation for the shear strength of rock joints[J]. Journal of Engineering Geology，2001，9(4)：349–352.

[3] 唐志成，夏才初，宋英成. 粗糙节理的峰值抗剪强度准则[J]. 岩土工程学报，2013，35(3)：571–577.(TANG Zhicheng，XIA Caichu，SONG Yingcheng. New peak shear strength criteria for roughness joints[J]. Chinese Journal of Geotechnical Engineering，2013，35(3)：571–577.(in Chinese))

[4] BARTON N. Review of a new shear-strength criterion for rock joints[J]. Engineering Geology，1973，7(4)：287–332.

[5] 赵坚. 岩石节理剪切强度的JRC-JMC新模型[J]. 岩石力学与工程学报，1998，17(4)：349–357.(ZHAO Jian. A new JRC-JMC shear strength criterion for rock joint[J]. Chinese Journal of Rock Mechanics and Engineering，1998，17(4)：349–357.(in Chinese))

[6] 杜时贵，胡晓飞，郭霄，等. JRC-JCS模型与直剪试验对比研究[J]. 岩石力学与工程学报，2008，27(增1)：2 747–2 753.(DU Shigui，HU Xiaofei，GUO Xiao，et al. Comparison study of JRC-JCS model and direct shear test[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(Supp.1)：2 747–2 753.(in Chinese))

[7] 夏才初，宋英龙，唐志成，等. 反复直剪试验节理强度与粗糙度变化的研究[J]. 中南大学学报：自然科学版，2012，43(9)：3 589–3 594. (XIA Caichu，SONG Yinglong，TANG Zhicheng，et al. Shear strength and morphology characteristic evolution of joint surface under cyclic loads[J]. Journal of Central South University：Science and Technology，2012，43(9)：3 589–3 594.(in Chinese))

[8] 高俊丽，张孟喜，张文杰. 加肋土工膜与砂土界面特性研究[J]. 岩土力学，2011，32(11)：3 225–3 230.(GAO Junli，ZHANG Mengxi，ZHANG Wenjie. Interface property between sand and reinforced geomembrane[J]. Rock and Soil Mechanics，2011，32(11)：3 225– 3 230.(in Chinese))

[9] 高俊丽，张孟喜. 加肋土工膜衬垫系统稳定性分析[J]. 岩土力学，2013，34(9)：2 608–2 614.(GAO Junli，ZHANG Mengxi. Stability analysis of reinforced geomembrane liner system[J]. Rock and Soil Mechanics，2013，34(9)：2 608–2 614.(in Chinese))

[10] 许宏发，李艳茹，刘新宇，等. 节理面分形模拟及JRC与分维的关系[J]. 岩石力学与工程学报，2002，21(11)：1 663–1 666.(XU Hongfa，LI Yanru，LIU Xinyu，et al. Fractal simulation of joint profiles and relationship between JRC and fractal dimension[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(11)：1 663–1 666.(in Chinese))

[11] LANARO F. A random field model for surface roughness and aperture of rock fractures[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(8)：1 195–1 210.

[12] YANG Z Y，DI C C，YEN K C. The effect of asperity order on the roughness of rock joints[J]. International Journal of Rock Mechanics and Mining Sciences，2001，38(5)：745–752.

[13] ZHOU H W，XIE H. Direct estimation of the fractal dimensions of a fracture surface of rock[J]. Surface Review and Letters，2003，10(5)：751–762.

[14] 张亚衡，周宏伟，谢和平. 粗糙表面分形维数估算的改进立方体覆盖法[J]. 岩石力学与工程学报，2005，24(17)：3 192–3 196. (ZHANG Yaheng，ZHOU Hongwei，XIE Heping. Improved cubic covering method for fractal dimensions of a fracture surface of rock[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(17)：3 192–3 196.(in Chinese))

[15] XIE H P，WANG J A，XIE W H. Fractal effects of surface roughness on the mechanical behavior of rock joints[J]. Chaos，Solitons and Fractals，1997，8(2)：221–252.