北山预选区新场地段岩体节理几何特征及评价

doi:10.13722/j.cnki.jrme.2014.1141

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (404 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Accurate analysis and evaluation of the geometric features of joints around BS17，BS18 and BS19 boreholes are the major task of site selection and site suitability evaluation of Xinchang section at Beishan，a candidate area in China. Site investigation，mathematical statistics and probability analysis were applied to study the geometric features of joints. 4 joint sets were observed in three boreholes，and the dominant orientations for joints are NE and NW. Joints are mainly shearing and steep dip and obey the normal distribution function. The spacing of joints is a negative exponential function. Wide spacing，long trace length and small trace midpoint density are the main characteristics of Xinchang section. Considering the importance of joints in high-level radioactive repository， method was applied to evaluate the quality of rock mass. The results indicate that the joints of rock mass are little developed and that the differences between the regions are small. Hence，the integrity of rock mass is good. In addition，the existence of faults may promote the joints development along the two sides of the fault in rock mass. The research and evaluation of joints provided important data support for repository site selection and site suitability evaluation

Key words： rock mechanics rock mass joint high-level radioactive waste optimal joint set trace midpoint density jointing structure evaluation

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LEI Guangwei1
	YANG Chunhe1
	2
	WANG Guibin2
	WEI Xiang1
	CHEN Shiwan1
	JI Guodong1
	HUO Liang1

Cite this article:

LEI Guangwei1,YANG Chunhe1,2, et al. Geometric features of joints and quality evaluation of rock mass in Xinchang section，Beishan[J]. , 2016, 35(5): 896-905.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2014.1141 OR https://rockmech.whrsm.ac.cn/EN/Y2016/V35/I5/896

[1] 王驹，陈伟明，苏锐，等. 高放废物地质处置及其若干关键科学问题[J]. 岩石力学与工程学报，2006，25(4)：801–812.(WANG Ju，CHEN Weiming，SU Rui，et al. Geological disposal of high-levelradioactive waste and its key scientific issues[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(4)：801–812.(in Chinese))
[2] 郭永海，王海龙，董建楠，等. 高放废物处置库芨芨槽预选场址深部地下水同位素研究[J]. 地质学报，2013，87(87)：1 477–1 485. (GUO Yonghai，WANG Hailong，DONG Jiannan，et al. Isotopic sady of deep groundwater in Jijicao preselected site for China?s high level radioactive waste disposal repository[J]. Acta Geologica Sinica，2013，87(87)：1 477–1 485.(in Chinese))
[3] BINGHAM C. Distributions on the sphere and on the projective plane[Ph. D. Thesis][D]. Connecticut：New Haven Connecticut USA Yale University，1964.
[4] KULATILAKE P H S W. Fitting fisher distributions to discontinuity orientation data[J]. Journal of Geological Education 1985，33(5)：266–269.
[5] KULATILAKE P H S W. Bivariate normal distribution fitting on discontinuity orientation clusters[J]. Mathematical Geology，1986，18(2)：181–195.
[6] PRIEST S D，HUDSON J A. Estimation of discontinuity spacing and trace length using scanline surveys[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1981，18(3)：183–197.
[7] PRIEST S D，HUDSON J A. Discontinuity spacing in rock[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1976，13(5)：135–148.
[8] ZHANG L，EINSTEIN H H. Estimating the mean trace length of rock discontinuities[J]. Rock Mechanics and Rock Engineering，1998，31(4)：217–235.
[9] 杨春和，包宏涛，王贵宾，等. 岩体节理平均迹长和迹线中点面密度估计[J]. 岩石力学与工程学报，2006，25(12)：2 475–2 480. (YANG Chunhe，BAO Hongtao，WANG Guibin，et al. Estimation of mean trace length and trace midpoint density of rock mass joints[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(12)：2 475–2 480.(in Chinese))
[10] 金远新，闵茂中，陈伟明，等. 甘肃北山预选区新场地段花岗岩类岩石特征研究[J]. 岩石力学与工程学报，2007，26(增2)：3 974–3 981.(JIN Yuanxin，MIN Maozhong，CHEN Weiming，et al. Study on granite characteristics of Xinchang section of candidate Beishan Area，Gansu Province[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(Supp.2)：3 974–3 981.(in Chinese))
[11] 陈伟明，王驹，赵宏刚，等. 高放废物地质处置北山预选区新场地段地质特征[J]. 岩石力学与工程学报，2007，26(增2)：4 000–4 006.(CHEN Weiming，WANG Ju，ZHAO Honggang，et al. Geological characters of Xinchang section in preselected Beishan Region for high-level radioactive waste disposal[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(Supp.2)：4 000–4 006.(in Chinese))
[12] 王峰，苏刚，晋佩东. 甘肃北山地区晚第四纪构造变形特征及演化趋势[J]. 地震研究，2004，27(4)：173–178.(WANG Feng，SU Gang，JIN Peidong. Tectonic deformation and evolution trend of Beishan Region，Gansu Province since late quaternar[J]. Journal of Seismological Research，2004，27(4)：173–178.(in Chinese))
[13] 杨建国，谢春林，王小红，等. 甘肃北山地区基本构造格局和成矿系列特征[J]. 地质通报，2012，32(2/3)：422–438.(YANG Jianguo，XIE Chunlin，WANG Xiaohong，et al. Basic tectonic framework and features of metallogenic series in Beishan area，Gansu Province[J]. Geological Bulletin of China，2006，32(2/3)：422–438.(in Chinese))
[14] 王峰，王驹，范洪海，等. 甘肃北山旧井地区晚第四纪活动断裂分布及其构造意义[J]. 地质论评，2005，51(3)：252–256.(WANG Feng，WANG Ju，FAN Honghai，et al. Distribution of late quaternary active faults and its tectonic significance in the Beishan Region，Gansu Province，China[J]. Geological Review，2005，51(3)：252–256.(in Chinese))
[15] 谢富仁，崔效锋，赵建涛，等. 中国大陆及邻区现代构造应力场分区[J]. 地球物理学报，2004，47(4)：654–662.(XIE Furen，CUI Xiaofeng，ZHAO Jiantao，et al. Regional division of the rechet tectonic stress field in China and adjacent areas[J]. Chinese Journal of Geophysics，2006，47(4)：654–662.(in Chinese))
[16] International Society for Rock Mechanics on Standardization of Laboratory and Field Tests. Suggested method for the quantitatived description of discontinutitie in rock masses[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abatracts，1978，15(6)：319–368.
[17] 王永江，耿树方，李长江. 北山大地构造深部成因与浅部成矿特征遥感综合分析[J]. 中国地质，2009，36(3)：714–727.(WANG Yongjiang，GENG Shufang，LI Changjiang. A remote sensing analysis of deep genesis of geotectonics and shallow oreforming characteristics in the Beishan Mountain[J]. Geology in China，2009，36(3)：714–727.(in Chinese))
[18] BARTON N. Some new Q-value correlations to assist in site characterization and tunnel design[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(2)：185–216.
[19] BIENIAWSKI Z T. Engineering classification of jointed rock masses[J]. Civil Engineer in South Africa，1973，15：335–343.
[20] 郑颖人，王永甫，王城，等. 节理岩体隧道的稳定分析与破坏规律探讨——隧道稳定性分析讲座之一[J]. 地下空间与工程学报，2011，7(4)：649–566.(ZHENG Yingren，WANG Yongfu，WANG Cheng，et al. Stability analysis and exploration of failure law of jointed rock tunnel—seminor on tunnel stability analysis[J]. Chinese Journal of Underground Space and Engineering，2011，7(4)：649–566.(in Chinese))
[21] 王刚，赵坚，宋宏伟. 节理岩体中巷道稳定性分析[J]. 中南大学学报：自然科学版，2013，44(7)：2 910–2 918.(WANG Gang，ZHAO Jian，SONG Hongwei. Analysis on roadway stability in jointed rock mass[J]. Journal of Central South University：Science and Technology，2013，44(7)：2 910–2 918.(in Chinese))