|
|
Model test of anchorage deep tunnel in blasting excavation |
YUAN Pu1,2,XU Ying1,2,XUE Junhua3 |
(1. Engineering Research Center of Underground Mine Construction,Ministry of Education,Anhui University of Science and Technology,Huainan,Anhui 232001,China;2. School of Civil Engineering and Architecture,Anhui University of Science and Technology,Huainan,Anhui 232001,China;3. State Key Laboratory of Deep Coal Mining and Environment Protection,
Huainan Mining Group Co.,Ltd.,Huainan,Anhui 232000,China) |
|
|
Abstract To investigate the effect of anchorage support on zonal disintegration in deep tunnel excavated by drilling and blasting method,three dimensional physical model experiment under high axial geo-stress and blasting excavation conditions was carried out by deep rock breakage and supporting technique model test apparatus. After blasting excavation and overload in axial direction,both radial tensile strain and radial compressive stress around anchored model tunnel presented a non-monotonic change of distribution with peaks and troughs,which is similar to the model experiment results without the anchorage support. The results indicate a tendency of inducing zonal disintegration in anchorage model tunnel. Compared with the model experiment results without anchorage support,there is no zonal disintegration phenomenon in anchorage positions of model tunnel supported by combination of anchor bolt and anchor cable. Therefore,combination of anchor bolt and anchor cable can transfer and redistribute the stress of surrounding rock. Hence,anchorage support plays an important role in restraining the zonal disintegration.
|
|
|
|
|
[1] |
谢和平,高 峰,鞠 杨,等. 深部开采的定量界定与分析[J]. 煤炭学报,2015,40(1):1-10.(XIE Heping,GAO Feng,JU Yang, et al. Quantitative definition and investigation of deep mining[J]. Journal of China Coal Society,2015,40(1):1-10.(in Chinese))
|
[2] |
何满潮,谢和平,彭苏萍,等. 深部开采岩体力学研究[J]. 岩石力学与工程学报,2005,24(16):2 803-2 813.(HE Manchao,XIE Heping,PENG Suping,et al. Study on rock mechanics in deep mining engineering[J]. Chinese Journal of Rock Mechanics and Engineering,2005,24(16):2 803-2 813.(in Chinese))
Your browse does not support frame! | | | |