水压致裂原地应力测试井下水压力数据采集系统及其应用研究

doi:10.13722/j.cnki.jrme.2016.0816

Abstract
Figure/Table
References (14)
Related Citation (15)

Download: PDF (981 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The downhole pressure data acquisition system has first been developed by the Institute of Crustal Dynamics. According to accurately recording the water pressure in a hydraulic fracturing test section，the system can not only eliminates the effects of hydraulic fracturing test system compliance and pore water pressure unevenness in the hole wall，but also greatly improves accuracy of the hydraulic fracturing system. The system has been successfully applied in practice，and its running stability and environmental suitability are satisfied to the requirements of further applications. Recently，two in-situ stress tests were successfully carried out by our work team，then the paper conducted a comparison of the two test results based on the data obtained by downhole and ground data acquisition system respectively. The results show that the test errors become larger with the test depth increasing. Moreover，both of two pressure gradients recorded by ground and downhole data acquisition systems are consistent during the pressure increasing stage，nevertheless，the pressure gradient obtained by ground data acquisition system is significantly greater than the one recorded by downhole system during pressure decreasing stage. The stress characteristics and in-situ stress values，especially reopen pressure，are smaller by ground system than those values obtained by downhole system.

Key words： rock mechanics hydraulic fracturing downhole data acquisition in-situ stress

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Jianxin1
	ZHAGN Ce1
	GUO Qiliang1
	LI Bing1
	LIU Xiaoli2

Cite this article:

WANG Jianxin1,ZHAGN Ce1,GUO Qiliang1, et al. The downhole pressure data acquisition system and its application in hydraulic fracturing in- situ stress testing[J]. , 2016, 35(S2): 3971-3976.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2016.0816 OR https://rockmech.whrsm.ac.cn/EN/Y2016/V35/IS2/3971

[1]	SCHEIDEGGER A E. Stress in the earth’s crust as determined from hydraulic fracturing data[J]. Geologie und Bauwesen，1962，27：45-53.
[2]	KEHLE R O. Determination of tectonic stresses through analysis of hydraulic well fracturing[J]. Journal of Geophysical Research，1964，69(2)：259-273.
[3]	HAIMSON B C，FAIRHURST C. Initiation and extension of hydraulicfractures in rocks [J]. Society of Petroleum Engineers Journal，1967，(9)：310-318.
[4]	HAIMSON B C，CORNET F H. ISRM suggested methods for rock stress estimation-Part 3：Hydraulic fracturing(HF) and/or hydraulic testing of pre-existing fractures(HTPF)[J]. International Journal of Rock Mechanics andMining Sciences，2003，40(7/8)：1011-1020.
[5]	HAIMSON B C. Earthquake related stresses at Rangely，Colorado[C]//The American Society of Civil Engineers. The 4th U S. Symposium on Rock Mechanics.University Park：The American Society of Civil Engineering，1972：689-708.
[6]	郭啟良，安其美，赵仕广. 水压致裂应力测量在广州抽水蓄能电站设计中的应用研究[J]. 岩石力学与工程学报，2002，21(6)：828-832.(GUO Qiliang，AN Qimei，ZHAO Shiguang. Application of hydraulic fracturing test in the design of Guangzhou pump storage project[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(6)：828-832.(in Chinese))
[7]	王成虎，郭啟良，丁立丰，等. 工程区高地应力判据研究及实例分析[J]. 岩土力学，2009，30(8)：2 359-2 364.(WANG Chenghu，GUO Qiliang，DING Lifeng，et al. High in-situ stress criterion for engineering area and a case analysis[J]. Rock and Soil Mechanics，2009，30(8)：2 359-2 364.(in Chinese))
[8]	BAO LH. In-situ stress measurement and surrounding rock stability analysis of the Gaoligong Mountain Tunnel[J]. Applied Mechanics and Materials，2014，501：1766-1773.
[9]	包林海，王成虎，郭啟良，等. 巴基斯坦某隧洞地应力状态及围岩大变形研究[J]. 现代隧道技术，2015，52(1)：38-44.(BAO Linhai， WANG Chenghu，GUO Qiliang，et al. Research on the geostress state and large-rock deformation of a water conveyance tunnel in Pakistan[J]. Modern TunnellingTechnology，2015，52(1)：38-44.(in Chinese))
[10]	刘允芳. 水压致裂法三维地应力测量[J]. 岩石力学与工程学报，1991，10(3)：246-256.(LIU Yunfang. In-situ 3-dimensional stress measurements by hydraulic fracturing technique[J]. Chinese Journal of Rock Mechanics and Engineering，1991，10(3)：246-256.(in Chinese))
[11]	Commission on Testing Methods，International Society for Rock Mechanics. Suggested methods for stress rock determination[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1987，24(1)：55-63.
[12]	ITO T，EVANSB K，KAVAIA K，et al. Hydraulic fracture reopening pressure and the estimation of maximum horizontal stress[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(5/6)：811-826.
[13]	王成虎，宋成科，邢博瑞. 水压致裂应力测量系统柔性分析及其对深孔测量的影响[J]. 现代地质，2012，26(4)：808-815.(WANG Chenghu，SONG Chengke，XING Borui. Compliance of drilling-rod system for hydro-fracturing in situ stress measurement and its effect on measurements at great depth[J]. Geoscience，2016，26(4)：808-815.(in Chinese))
[14]	ITO T，SATOH T，KATO H. Deep rock stress measurement by hydraulic fracturing method taking account of system compliance effect [M]// XIE FR. Proceeding of the 5th International Symposium on In-situ Rock Stress. Boca Raton：CRC Press，2010：43-49.