循环荷载作用下应力速率与应变速率不同步研究

doi:10.13722/j.cnki.jrme.2016.0057

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (479 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to study the deformation of rock under cyclic loading and unloading，the tests to the 56 sandstone samples from Three Gorges Reservoir area were carried out. The concept of stress-strain hysteresis was modified according to the asynchronous phenomenon from the tests. The phenomena that the stress is ahead of or behind the strain exist at the same time，so it is more reasonable that the hysteresis phenomenon of stress-strain is named as the stress-strain asynchronous phenomenon. On the basis of the stress-strain asynchronous phenomenon，the asynchronous phenomenon of the stress rate-strain rate should be considered. After the analysis of the asynchronous mechanism of the cyclic loading and unloading test，four concepts，the stress-strain attraction point，the stress rate-strain rate attraction point，the stress-strain compensation mechanism and the stress rate-strain rate compensation mechanism，were proposed. Three findings were obtained. The stress-strain and stress-strain rate synchronization did not occur simultaneously. The asynchronous phenomenon is inevitable and synchronous phenomenon only exists at a certain point. The relationship of stress-strain is the process of spiral cycle progression. The asynchronous phenomenon of the stress rate-strain rate was found for the first time in the cyclic loading and unloading tests and the definition of three asynchronous stages was proposed. The predicted and actual deformation rate，the apparent elastic modulus and the instantaneous Poisson ratio of the samples with the time were analyzed and three methods were put forward to judge the asynchronous stages quantitatively. Besides，by analyzing the mechanism of stress-strain rate based on the same frequency and different peak strength tests，a conclusion is reached that the of the sample and the coincidence degree of increases with the increase of the peak intensity.

Key words： rock mechanics cyclic loading and unloading asynchronous phenomenon compensation mechanism

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Jie1
	2
	YAN Lizhou2
	LI JIanlin1
	2
	YUAN Tengfei2
	YU Zhenmin2
	WANG Fei2

Cite this article:

LIU Jie1,2,YAN Lizhou2, et al. Study on the asynchronous phenomenon of the stress rate and strain rate under cyclic loading and unloading tests[J]. , 2017, 36(1): 29-42.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2016.0057 OR https://rockmech.whrsm.ac.cn/EN/Y2017/V36/I1/29

[1]	COOK N G，HODGESON K. Some detailed stress-strain curves for rock[J]. Journal of Geophysical Research，1965，70(12)：2 883- 2 888.
[2]	HOLCOMB D J. Memory relaxation and microfracturing in dilatant rock[J]. Journal of Geophysical Research，1981，86(B7)：6 235-6 248
[3]	RAY S K，SARKAR M，SINGH T N. Effect of cyclic loading and strain rate on the mechanical behaviour of sandstone[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(4)：543-549.
[4]	陈运平，刘干斌，姚海林. 岩石滞后非线性弹性模拟的研究[J]. 岩土力学，2006，27(3)：341-347.(CHEN Yunping，LIU Ganbin，YAO Hailin. Study on simulation for hysteretic nonlinear elasticity of rock[J]. Rock and Soil Mechanics，2006，27(3)：341-347.(in Chinese))
[5]	席道瑛，陈运平，陶月赞，等. 岩石的非线性弹性滞后特征[J]. 岩石力学与工程学报，2006，25(6)：1 086-1 093.(XI Daoying，CHEN Yunping，TAO Yuezan，et al. Nonlinear elastic hysteretic characteristics in rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(6)：1 086-1 093.(in Chinese))
[6]	唐杰，孙成禹，周家惠，等. 岩石非线性阻尼滞后响应特性研究[J]. 岩石力学与工程学报，2012，31(增1)：2 948-2 955.(TANG Jie，SUN Chengyu，ZHOU Jiahui，et al，Study of nonliner damping hysteresis response charater for rock sample[J]. Journal of Rock Mechanics and Engineering，2012，31(Supp.1)：2 948-2 955.(in Chinese))
[7]	席道瑛，王鑫，陈运平. 描写岩石非线性弹性滞后和记忆的宏观模型[J]. 岩石力学与工程学报，2005，24(13)：2 212-2 219.(XI Daoying，WANG Xin，CHEN Yunping.Macroscopic model of hysteresis and memory for the description of rock nonlinear elastic[J]. Journal of Rock Mechanics and Engineering，2005，24(13)：2 212-2 219.(in Chinese))
[8]	任隽，陈东柏，戴王强，等. 岩石滞后非线性弹性响应的物理模型[J]. 西北地震学报，2011，33(3)：299-303.(REN Jun，CHEN Dongbai，DAI Wangqiang，et al. Physical models of hysteretic nonlinear elasticity of rock[J]. Northwestern Seismological Journal，2011，33(3)：299-303.(in Chinese))
[9]	XU H，DAY S M，MINSTER J B. Model for nonlinear wave propagation derived from rock hysteresis measurement[J]. Journal of Geophysical Research，1998，103(B3)：29 915-29 926.(in Chinese))
[10]	XU H，DAY S M，MINSTER J B. Hysteresis and two-dimensional nonlinear wave propagation in Berea Sandstone[J]. Journal of Geophysical Research，2000，105(B3)：6 163-6 175.(in Chinese))
[11]	陈运平，王思敬，王恩志. 岩石应力-应变滞后现象的定量研究[J]. 岩石力学与工程学报，2007，26(增2)：4 066-4 073.(CHEN Yunping，WANG Sijing，WANG Enzhi. Quantitative study on stress- strain hysteretic behaviors in rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(Supp.2)：4 066-4 073.(in Chinese))
[12]	刘建锋，谢和平，徐进，等. 循环荷载作用下岩石阻尼特性的试验研究[J]. 岩石力学与工程学报，2008，27(4)：712-717.(LIU Jianfeng，XIE Heping，XU Jin，et al. Experimental study on damping characteristics of rock under cyclic loading[J]. Chinese Journal of Rock Mechanics and Engineering[J]. 2008，27(4)：712-717.(in Chinese))
[13]	肖建清，冯夏庭，丁德馨. 常幅循环荷载作用下岩石的滞后及阻尼效应研究[J]. 岩石力学与工程学报，2010，29(8)：1 677-1 683. (XIAO Jianqing，FENG Xiating，DING Dexin. Study of nonlinear damping hysteresis response character for rock sample[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(8)：1 677-1 683. (in Chinese))
[14]	陈运平，席道瑛，薛彦伟. 循环荷载下饱和岩石的应力-应变动态响应[J]. 石油地球物理勘探，2003，38(4)：409-413.(CHEN Yunping，XI Daoying，XUE Yanwei. Dynamic stress-strain response in saturated rock under cycling load[J]. Oil Geophysical Prospecting，2003，38(4)：409-413.(in Chinese))
[15]	刘杰，李建林，唐亮，等. 三角波卸载段作用下钙质砂岩毫秒量级变形速率预测模型研究[J]. 岩土力学，2014，35(增1)，63-70.(LIU Jie，LI Jianlin，TANG Liang，et al. Study of prediction model for milliseconds deformation rate in triangular wave unloading segment of calcareous sandstone[J]. Rock and Soil Mechanics，2014，35(Supp.1)：63-70.(in Chinese))