|
|
|
| Analytical approach of counter tilt rock slopes locally reinforced by fully grouted bolts |
| ZHENG Yun1，CHEN Congxin1，LIU Tingting1，2，ZHANG Haina1，SUN Chaoyi1，LU Zude1 |
(1. State Key Laboratory of Geomechanics and Geotechnical Engineering，Institute of Rock and Soil Mechanics，Chinese Academy
of Sciences，Wuhan，Hubei 430071，China；2. Key Laboratory of Roadway Bridge and Structure Engineering，Wuhan
University of Technology，Wuhan，Hubei 430070，China) |
|
|
|
|
Abstract The reinforcement of fully grouted bolts is widely used in slope engineering due to its proven efficacy and low cost. Based on the newly proposed approach of stability analysis of counter tilt rock slopes upon flexural-toppling failure，a mechanical model of such slopes reinforced by fully grouted bolts was established. The formula of slope safety factor after reinforcement was given. In addition，the comparison between the theoretical method and discrete element method(UDEC) was made. The simulated results are consistent with those obtained with the analytical method. The optimal reinforcement position is located in the superimposed toppling zone and the precise location is related to the parameters of slope and anchoring. Reducing the angle between the bolt and discontinuity can make the full use of the shear resistance of bolt.
|
|
|
|
|
|
| [9] |
陈红旗，黄润秋. 反倾层状边坡弯曲折断的应力及挠度判据[J]. 工程地质学报，2004，12(3)：243-246.(CHEN Hongqi，HUANG Runqiu. Stress and flexibility criteria of bending and breaking in a counter tendency layered slope[J]. Journal of Engineering Geology，2004，12(3)：243-246.(in Chinese))
|
| [20] |
CHESSON E，FAUSTINO N C，MUNSE W H. High strength bolts subjected to tension and shear[J]. Journal of the Structural Division，1965：91(5)：155-180.
<![CDATA[ <body>Your browse does not support frame!</body> ]]> | | | |
2017, Vol. 36 
