超高路堑边坡治理工程案例研究II：治理对策及其过程控制

doi:10.13722/j.cnki.jrme.2016.0659

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (797 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper，the mitigation strategy of Landslide K227 was summarized，and the numerical simulation and optimization of the mitigation stages of the upper，middle and lower parts of the slope were conducted. The results of the comparison of the field monitoring and simulation data guided the process controlling of slope construction，which achieved the target of safety，orderliness and control at all the stages of the construction and no hidden risks. The global safety factor 1.10 was suggested to be the threshold value to define the slope stability under the comprehensive conditions due to the need for stability control of super-high cut slope and their structural durability in the whole construct process. The backfilling at the toe of the slope was imperative to ensure the present stability during the construction of the super-high cut slope. The timing and opportunity to adjust the similar temporary safety precautions should be prudently determined. Planning in advance and installation in time of two rows of anti-slide anchor piles were important to control the reduction of stability and the development of towing deformation in up-rear part of slope，to keep the safety of construction process and to make the remediation successful. There are various potential failure mechanisms in the treatment to super-high cut slope with the transformation of local and global deformation of slope. Therefore，multiple plans are supposed to be simulated and adjusted in order to maintain the compatibility of local and global deformation. The passive mode of the design adjustment due to the slope failure need be to transformed into the active one of simulating the slope deformation in advance，which can control the secondary disasters during the period of construction of cut slopes.

Key words： slope engineering high slope landslide mitigation numerical simulation stability control

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Hao1
	2
	WANG Xiaodong3
	PAN Jun3

Cite this article:

WANG Hao1,2,WANG Xiaodong3, et al. A case study of super-high cut slope II：stabilization measures and their process controls[J]. , 2017, 36(5): 1152-1161.

URL:

http://www.rockmech.org/EN/10.13722/j.cnki.jrme.2016.0659 OR http://www.rockmech.org/EN/Y2017/V36/I5/1152

[3]	张玉芳. 京珠高速公路108滑坡及防治工程分析[J]. 西南交通大学学报，2003，38(6)：633-637.(ZHANG Yufang. Analyses of landslide No.108 in Beijing-Zhuhai highway and its treatment measures[J]. Journal of Southwest Jiaotong University，2003，38(6)：633-637.(in Chinese))
[12]	晏鄂川，唐辉明，何淼，等. 路堑变坡工程的动态仿真分析[J]. 岩土力学，2004，25(2)：246-250.(YAN Ehuan，TANG Huiming，HE Miao，et al. Real- time simulation for slope engineering of highway[J]. Rock and Soil Mechanics，2004，25(2)：246-250.(in Chinese))
[1]	黄润秋. 岩石高边坡发育的动力过程及其稳定性控制[J]. 岩石力学与工程学报，2008，27(8)：1 525-1 544.(HUANG Runqiu. Geodynamical process and stability control of high rock slope development[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(8)：1 525-1 544.(in Chinese))
[7]	曾宪明，陈肇元，王靖涛，等. 锚固类结构安全性与耐久性问题探讨[J]. 岩石力学与工程学报，2004，23(13)：2 235-2 242. (ZENG Xianming，CHEN Zhaoyuan，WANG Jingtao，et al. Research on safety and durability of bolt and cable-supported structures[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(13)：2 235-2 242.(in Chinese))
[5]	LEE S G，HENCHER S R. The repeated failure of a cut-slope despite continuous reassessment and remedial works[J]. Engineering Geology，2009，107(1/2)：16-41.
[9]	王浩，林一夫，吴栋梁，等. 复杂路堑高边坡病害治理效果模糊层次评价[J]. 工程地质学报. 2014，22(5)：936-943.(WANG Hao，LIN Yifu，WU Dongliang，et al. Fuzzy hierarchy analysis for treatment effect of complex cutting high slope disease[J]. Journal of Engineering Geology，2014，22(5)：936-943.(in Chinese))
[10]	赵尚毅，郑颖人，唐树名. 路堑边坡施工顺序对边坡稳定性影响数值模拟分析[J]. 地下空间，2003，23(4)：370-374.(ZHAO Shangyi，ZHENG Yingren，TANG Shuming. Numerical simulation analysis for the influence of construction process of deep cut slop on its stability[J]. Underground Space，2003，23(4)：370-374.(in Chinese))
[13]	王浩，王晓东，泮俊. 超高路堑边坡治理工程案例研究I：边坡失稳机制模拟分析[J]. 岩石力学与工程学报，2017，36(4)：899-909.(WANG Hao，WANG Xiaodong，PAN Jun. A case study of super-high cut slope I：simulation and analysis of slope instability mechanism[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(4)：899-909.(in Chinese))
[15]	王恭先，徐峻岭，刘光代，等. 滑坡学与滑坡防治技术[M]. 北京：中国铁道科学出版社，2004：136-138.(WANG Gongxian，XU Junlin，LIU Guangdai，et al. The science and control technology of landslide[M]. Beijing：China Railway Science Press，2004：136-138.(in Chinese))
[17]	王浩，孙木子，马新凯，等. 路堑边坡平面滑动演化过程及远程滑动机制的模拟与分析[J]. 工程地质学报，2015，23(03)：438-447.(WANG Hao，SUN Muzi，MA Xinkai，et al. Simulation and analysis of sliding evolution process and long run-out sliding mechanism for plane sliding of cutting slope[J]. Journal of Engineering Geology，2015，23(03)：438-447.(in Chinese))
[2]	邹团结，夏晓慧，罗萍. 路堑高陡边坡开挖变形的时空效应分析[J]. 公路工程，2012，37(6)：48-51.(ZOU Tuanjie，XIA Xiaohui，LUO Ping. Analysis about Tau-effect of soil deformation within the deep road slope[J]. Highway Engineering，2012，37(6)：48-51.(in Chinese))
[4]	ZHANG F Y，LIU G，CHEN W W，et al. Human-induced landslide on a high cut slope：a case of repeated failures due to multi- excavation[J]. Journal of Rock Mechanics and Geotechnical Engineering，2012，4(4)：367-374.
[6]	郑静，韩龙，朱本珍，等. 边坡锚固工程质量问题及其影响[J]. 铁道工程学报，2009，(1)：27-31.(ZHENG Jing，HAN Long，ZHU Benzhen，et al. The problems related to the anchorage engineering for slope and its effects[J]. Journal of Railway Engineering Society，2009，(1)：27-31.(in Chinese))
[8]	常聚友，高景宏，刘志军. 山区铁路抗滑桩完整性检测及断桩原因分析[J]. 铁道工程学报，2012，(3)：40-43.(CHANG Juyou，GAO Jinghong，LIU Zhijun. Integrity testing of anti-slide pile for railway in mountain area and analysis of causes for pile fracture[J]. Journal of Railway Engineering Society，2012，(3)：40-43.(in Chinese))
[11]	肖世国，周德培. 岩石高边坡的动态设计施工模式[J]. 岩石力学与工程学报，2002，21(9)：1 372-1 374.(XIAO Shiguo，ZHOU Depei. Dynamic design and construction mode of high rock slope[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(9)：1 372-1 374.(in Chinese))
[14]	中华人民共和国专业标准编写组. JTG D30－2004 公路路基设计规范[S]. 北京：人民交通出版社，2004.(The Professional Standards Compilation Groups of the People?s Republic of China. JTG D30—2004 Code for design of highway subgrades[S]. Beijing：China Communications Press，2004.(in Chinese))
[16]	王浩. 岩质路堑高边坡设计理论与方法研究[博士学位论文][D]. 北京：中国铁道科学研究院，2007.(WANG Hao. Study on the design theory and methods for deep cut rock slopes[Ph. D. Thesis][D]. Beijing：Chinese Academy of Railway Sciences，2007.(in Chinese))
[18]	詹松，汤连生，杨文甫. 广东高速公路路堑边坡失稳原因与防治分析[J]. 工程地质学报，2006，14(2)：184-189.(ZHAN Song，TANG Liansheng，YANG Wenfu. Causes and preventive measures of cut slope failures on expressways in Guangdong province[J]. Journal of Engineering Geology，2006，14(2)：184-189.(in Chinese))