基于散体材料性质的土石混填路基压实度快速检测方法

doi:10.13722/j.cnki.jrme.2017.0011

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (288 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Static penetration experiments is an effective method for rapid measuring the compactness of soil-rock mixed subgrade. However，the testing principle need to be further studied. In this paper，a method of stress analysis suitable for the granular material of soil-rock mixed subgrade is established by assuming the stresses transmitted downward with the shape of cone in the soil-rock mixture based on the stress transmission mechanism of granular material. The deformation modulus，Poisson?s ratio and porosity varied with the deformation of subgrade is determined on the basis of the porous media mechanics. A force-settlement relationship of soil-rock mixed subgrade，i.e. the P-s curve，is established based on the layer summation method. On the basis of the P-s curves obtained with the static penetration experiments，the initial porosity is obtained with the method of back analysis using an adaptive algorithm. The method for rapid measuring the compactness of soil-rock mixed subgrade is thus established. The accuracy of this method meets the engineering requirement without the complicated calibration experiments. The results of proposed method were compared with the results from tests and existing method and proved that this method was reasonable and feasible.

Key words： soil mechanics soil-rock mixture subgrade static penetration granular material porosity compactness simulated annealing algorithm

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HE Min1
	CAO Wengui1
	WANG Jiangying2
	LUO Hong1

Cite this article:

HE Min1,CAO Wengui1,WANG Jiangying2, et al. A method for rapid measuring the compactness of soil-rock mixed subgrade based on the characteristics of granular material[J]. , 2017, 36(8): 2061-2069.

URL:

http://www.rockmech.org/EN/10.13722/j.cnki.jrme.2017.0011 OR http://www.rockmech.org/EN/Y2017/V36/I8/2061

[6]	罗宏，赵明华，曹文贵，等. 基于静载试验的土石混填路基压实度检测新方法[J]. 岩石力学与工程学报，2007，26(增2)：4 496-4 502.(LUO Hong，ZHAO Minghua，CAO Wengui，et al. A new method for checking compactness of soil-rock mixture subgrade based on static load test[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(Supp.2)：4 496-4 502.(in Chinese)) " target="_blank">
[9]	曹文贵，张竣淞. 基于静力贯入的路基压实度确定方法[J]. 湖南大学学报，2013，40(11)：19-25.(CAO Wengui，ZHANG Junsong. Determination method for the compactness of subgrade based on static penetration[J]. Journal of Hunan University，2013，40(11)：19-25.(in Chinese))
[13]	徐芝纶. 弹性力学[M]. 北京：高等教育出版社，2006：218-222. (XU Zhilun. Elastic mechanics[M]. Beijing：Advansed Education Press，2006：218-222.(in Chinese)) " target="_blank">
[3]	沙庆林. 公路压实与压实标准[M]. 北京：人民交通出版社，1999：181-205.(SHA Qinglin. Road compaction and compaction standard[M]. Beijing：China Communications Press，1999：181-205.(in Chinese)) " target="_blank">
[15]	王龙甫. 弹性理论[M]. 北京：科学出版社，1978：12-14.(WANG Longfu. Elastic theory[M]. Beijing：Science Press，1978：12-14.(in Chinese)) " target="_blank">
[1]	中华人民共和国行业标准编写组. JTG D30—2015 公路路基设计规范[S]. 北京：人民交通出版社，2015.(The Professional Standards Compilation Group of People?s Republic of China. JTG D30—2015 Specifications for design of highway subgrades[S]. Beijing：China Communications Press，2015.(in Chinese)) " target="_blank">
[11]	DA SILVA M，RAJCHENBACH J. Stress transmission through a model system of cohesionless elastic grains[J]. Nature，2000，406(17)：708-710. " target="_blank">
[4]	周志军. 土石混填路基压实质量控制方法研究[博士学位论文][D]. 西安：长安大学，2006.(ZHOU Zhijun. Study on the control method of quality in the construction of the subgrade filled with earth-rock mixtures[Ph. D. Thesis][D]. Xi?an：Chang?an University，2006.(in Chinese)) " target="_blank">
[8]	伍丹. 基于静力贯入的土石混填路基压实度确定方法探讨[硕士学位论文][D]. 长沙：湖南大学，2010.(WU Dan. Study on a determination method for the compactness of soil-rock mixture subgrade based on static penetration test[M. S. Thesis][D]. Changsha：Hunan University，2010.(in Chinese)) " target="_blank">
[17]	曹文贵，李鹏，唐旖旎，等. 基于孔隙介质特征的地基沉降分层总和分析方法[J]. 中国公路学报，2016，29(3)：1-9.(CAO Wengui，LI Peng，TANG Yini，et al. The layer-wise summation analysis method for the settlement of ground foundation based on porous medium features[J]. China Journal of Highway and Transport，2016，29(3)：1-9.(in Chinese))
[7]	曹文贵，伍丹，赵明华，等. 基于静力贯入的土石混填路基压实度确定方法[J]. 中国公路学报，2010，23(5)：8-15.(CAO Wengui，WU Dan，ZHAO Minghua，et al. Determination method for compactness of soil-rock mixture subgrade based on static penetration[J]. China Journal of Highway and Transport，2010，23(5)：8-15.(in Chinese))
[14]	李遇春. 弹性力学[M]. 北京：中国建筑工业出版社，2009：73-74.(LI Yuchun. Elastic mechanics[M]. Beijing：China Architecture and Building Press，2009：73-74.(in Chinese)) " target="_blank">
[2]	中华人民共和国行业标准编写组. JTG E40—2007 公路土工试验规程[S]. 北京：人民交通出版社，2007.(The Professional Standards Compilation Group of People?s Republic of China. JTG E40—2007 Test methods of soil for highway engineering[S]. Beijing：China Communications Press，2007.(in Chinese)) " target="_blank">
[10]	张竣淞. 基于Duncan-Chang模型的路基压实度确定方法探讨[硕士学位论文][D]. 长沙：湖南大学，2013.(ZHANG Junsong. Study on determination method for compactness of subgrade based on Duncan-Chang model[M. S. Thesis][D]. Changsha：Hunan University，2013.(in Chinese)) " target="_blank">
[16]	邵龙潭，孙益振. 考虑空隙变形的孔隙介质本构关系初探[J]. 岩土力学，2006，27(4)：561-565.(SHAO Longtan，SUN Yizhen. Primary study of stress-strain constitutive relation for porous media[J]. Rock and Soil Mechanics，2006，27(4)：561-565.(in Chinese))
[12]	孙广忠. 岩体力学基础[M]. 北京：科学出版社，1983：165-180. (SUN Guangzhong. Rock mass mechanics foundation[M]. Beijing：Science Press，1983：165-180.(in Chinese)) " target="_blank">
[5]	曹文贵，胡天浩，罗宏，等. 土石混填路基压实度检测新方法探讨[J]. 湖南大学学报，2008，35(2)：22-26.(CAO Wengui，HU Tianhao，LUO Hong，et al. Discussion on a new technique for detecting compactness of soil-rock mixture roadbed[J]. Journal of Hunan University，2008，35(2)：22-26.(in Chinese))
[18]	曹文贵，卢山，胡坚丽. 基于自适应退火算法的非线性位移反分析方法研究[J]. 岩土力学，2008，29(7)：1 753-1 758.(CAO Wengui，LU Shan，HU Jianli. Research on method of nonlinear displacement back analysis based on adaptive annealing algorithm[J]. Rock and Soil Mechanics，2008，29(7)：1 753-1 758.(in Chinese))