基于图像处理技术的尾矿颗粒形态研究

doi:10.13722/j.cnki.jrme.2016.0594

Abstract
Figure/Table
References (18)
Related Citation (15)

Download: PDF (1455 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

The physical and mechanical properties of the dielectric materials mainly depend on shapes of particles in granular media. Therefore，in order to reveal the differences of physical and mechanical properties between tailings and natural sands，one of best ways is to use microscopy and image processing technologies to quantify four indicators (flatness，roundness，convexity and roughness) which can well quantify the shapes of particles. In this research，four tailings (gold，tin，copper and iron) and two natural sands (river sand and sea sand) are selected for such comparison. Results show that：(1) the flatness of tailings and sea sands decrease with the increase of particle size，which means tailings or sea sands with needle shapes tend to be spherical. (2) The roundness of tailings and river sands decrease with the increase of particle size，which also indicates the shapes of tailings and rover sands tend to spherical shapes. However，the roundness of sea sands decrease with the increase of particle size. (3) The convexity of tailings and sea sands increase with the increase of particle size，which indicates that angularity of tailings and sea sands surface reduce with the increase of particle size. (4) The roughness of tailings，river and sea sands increase with the increase of particle size.

Key words： mining engineering shopes of tailings particles shape parameter image processing

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YANG Yonghao1
	2
	WEI Zuoan1
	2
	CHEN Yulong3
	REN Bingxu1
	2

Cite this article:

YANG Yonghao1,2,WEI Zuoan1, et al. Study on the shapes of tailings particles based on microscopy and image processing technologies[J]. , 2017, 36(S1): 3689-3695.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2016.0594 OR https://rockmech.whrsm.ac.cn/EN/Y2017/V36/IS1/3689

[1]	孙其诚，王光谦. 颗粒物质力学导论[M]. 北京：科学出版社，2009：2.(SUN Qicheng，WANG Guangqian. An introduction to granular material mechanics[M]. Beijing：Science Press，2009：2.(in Chinese))
[2]	涂新斌，王思敬. 图像分析的颗粒形状参数描述[J]. 岩土工程学报，2004，26(5)：659-662.(TU Xinbin，WANG Sijing. Particle shape descriptor in digital image analysis[J]. Chinese Journal of Geotechnical Engineering，2004，26(5)：659-662.(in Chinese))
[3]	BRAJA M D. Principles of geotechnical engineering[M]. 7th ed. Stamford：Cengage Learning，2009：46-47.
[4]	陈仲颐，周景星，王洪瑾. 土力学[M]. 北京：清华大学出版社，1994：7-10.(CHEN Zhongyi，ZHOU Jingxing，WANG Hongjin. Soil mechanics[M]. Beijing：Tsinghua University Press，1994：7-10.(in Chinese))
[5]	ALTUHAFI F，O¢SULLIVAN C，CAVARRETTA I. Analysis of an image-based method to quantify the size and shape of sand particles[J]. Journal of Geotechnical and Geoenvironmental Engineering，2013，139(8)：1290-1307.
[6]	MORA C F，KWAN A K H. Sphericity，shape factor，and convexity measurement of coarse aggregate for concrete using digital image processing[J]. Cement and Concrete Research，2000，30(3)：351-358.
[7]	YANG J，LUO X D. Exploring the relationship between critical state and particle shape for granular materials[J]. Journal of the Mechanics and Physics of Solids，2015，84：196-213.
[8]	Rausch J， Grobéty B， Vonlanthen P. Eifel maars：quantitative shape characterization of juvenile ash particles(Eifel Volcanic Field，Germany)[J]. Journal of Volcanology and Geothermal Research，2015，291(1)：86-100.
[9]	刘清秉，项伟，BUDHU M，等. 砂土颗粒形状量化及其对力学指标的影响分析[J]. 岩土力学，2011，32(增1)：190-197.(LIU Qingbing，XIANG Wei，BUDHU M，et al. Study of particle shape quantification and effect on mechanical property of sand[J]. Rock and Soil Mechanics，2011，32(Supp.1)：190-197.(in Chinese))
[10]	李晓燕，卜胤，汪海年，等. 粗集料形态特征的定量评价指标研究[J]. 建筑材料学报，2015，18(3)：524-529.(LI Xiaoyan，BU Yin，WANG Hainian，et al. Research on quantitative evaluation of morphological characteristic of coarse aggregates[J]. Journal of Building Materials，2015，18(3)：524-529.(in Chinese))
[11]	尹光志，魏作安，许江. 细粒尾矿及其堆坝稳定性分析[M]. 重庆：重庆大学出版社，2004：5-9.(YIN Guangzhi，WEI Zuoan，XU Jiang. Research on the characteristics and dam stability of fine grained tailings[M]. Chongqing：Chongqing University Press，2004：5-9.(in Chinese))
[12]	WEI Z，YIN G，WANG J，et al. construction and management of tailings storage facilities for surface disposal in China：case studies of failures[J]. Waste Management and Research，2013，31(1)：106-112.
[13]	温喜廉，欧阳东，李建友. 细骨料颗粒形貌特征、显微及微观结构研究[J]. 混凝土，2013，(6)：62-66.(WEN Xilian，OUYANG Dong，LI Jianyou. Research of particle morphology，microscopic structure and microstructure of fine aggregate[J]. Concrete，2013，(6)：62-66.(in Chinese))
[14]	尹飞龙，欧阳东，温喜廉，等. 海砂与河砂、尾砂作为建筑用砂的比较研究[J]. 混凝土，2011，(12)：73-78.(YIN Feilong，OUYANG Dong，WEN Xilian，et al. Comparative study of sea sand，river sand and tailing sand which using as building sand[J]. Concrete，2011，(12)：73-78.(in Chinese))
[15]	曾凡，胡永平，杨毅，等. 矿物加工颗粒学[M]. 徐州：中国矿业大学出版社，2001：19-20.(ZENG Fan，HU Yongping，YANG Yi，et al. Particle technology of mineral processing[M]. Xuzhou：China University of Mining and Technology Press，2001：19-20.(in Chinese))
[16]	汪海年，郝培文. 粗集料二维形状特征的图像描述[J]. 建筑材料学报，2009，12(6)：747-751.(WANG Hainian，HAO Peiwen. Digital description of two-dimensional shape characteristics of coarse aggregate[J]. Journal of Building Materials，2009，12(6)：747-751.(in Chinese))
[17]	WILLS B A，NAPIER-MUNN T J. WILLs' Mineral processing technology[M]. Oxford：Pergamon Press：2005：145-148.
[18]	GUYON E，TROADEC J P. Du sac de billes au tas de sable[M]. Paris：Odile Jacob Science，1994：22-60.