基于Barton标准剖面线精细数字化处理的岩石节理JRC计算新公式研究

doi:10.13722/j.cnki.jrme.2017.0974

Abstract
Figure/Table
References (15)
Related Citation (15)

Download: PDF (356 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Taking ten standard joint profiles proposed by Barton as an object，professional image processing softwares PHOTOSHOP and MATLAB were firstly used to digitize the image of ten standard JRC profiles by removing stray dots located close to the profiles and interpolating pixels between discontinuities in the profiles，then accurate coordinates data of ten standard joint profiles were obtained. On this basis，the root mean square of slope Z₂ and amplitude parameter h_A of the standard profiles were calculated at different sampling intervals，and a new empirical equation between JRC and Z₂ and h_Awas established. Then the new equation，as well as other commonly-used empirical equations，were employed to calculate the JRC values of ten standard profiles and some natural rock joint profiles. The predictions of JRC were compared with the back-analysis values from shear tests，from which it can be concluded that the prediction accuracy of the new empirical equation is greater than that of the former empirical equations，and it has a good prospect in engineering applications.

Key words： rock mechanics rock joint standard joint profile joint roughness coefficient(JRC) digitization

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Rui1
	2
	XIAO Weimin1
	2

Cite this article:

LI Rui1,2,XIAO Weimin1, et al. Study on a new equation for calculating JRC based on fine digitization of standard profiles proposed by Barton[J]. , 2018, 37(S1): 3515-3522.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.0974 OR https://rockmech.whrsm.ac.cn/EN/Y2018/V37/IS1/3515

[1]	BARTON N. A relationship between joint roughness and joint shear strength[C]// Proceedings of the International Symposium on Rock Fracture. Nancy，France：[s.n.]，1971：1-8.
[2]	BARTON N. Review of a new shear-strength criterion for rock joints[J]. Engineering Geology，1973，7(4)：287-332.
[3]	BARTON N，CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock Mechanics，1977，10(1/2)：1-54.
[4]	BEER A J，STEAD D，COGGAN J S. Estimation of the joint roughness coefficient(JRC) by visual comparison[J]. Rock Mechanics and Rock Engineering，2002，35(1)：65-74.
[5]	TSE R，CRUDEN D M. Estimating joint roughness coefficients[J]. International Journal of Rock Mechanics andMining Sciences andGeomechanics Abstracts，1979，16(5)：303-307.
[6]	MAERZ N H，FRANKLIN J A，BENNETT C P. Joint roughness measurement using shadow profilometry[J]. International Journal of Rock Mechanics andMining Sciences andGeomechanics Abstracts，1990，27(5)：329-343.
[7]	YU X，VAYSSADE B. Joint profiles and their roughness parameters[J]. International Journal of Rock Mechanics andMining Sciences andGeomechanicsAbstracts，1991，28(4)：333-336.
[8]	YANG Z Y，LO S C，DI CC. Reassessing the joint roughness coefficient(JRC) estimation using Z2[J]. Rock Mechanics andRock Engineering，2001，34(3)：243-251.
[9]	GRASSELLI G，EGGER P. Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters[J]. International Journal of Rock Mechanics andMining Sciences，2003，40(1)：25-40.
[10]	HSIUNG S M，GHOSHA，AHOLA M P，et al. Assessment of conventional methodologies for joint roughness coefficient determination[J]. International Journal of Rock Mechanics andMining Sciences andGeomechanicsAbstracts，1993，30(7)：825-829.
[11]	TATONE B S A，GRASSELLI G. A new 2D discontinuity roughness parameter and its correlation withJRC[J]. International Journal of Rock Mechanics andMining Sciences，2010，47(8)：1391-1400.
[12]	JANG HS，KANG S S，JANG B A. Determination of joint roughness coefficients using roughness parameters[J].Rock Mechanics andRock Engineering，2014，47(6)：2061-2073.
[13]	LEE Y H，CARR J R，BARR D J，et al. The fractal dimension as a measure of the roughness of rock discontinuity profiles[J]. International Journal of Rock Mechanics andMining Sciences andGeomechanics Abstracts，1990，27(6)：453-464.
[14]	GAO Y，WONG L N Y. A modified correlation between roughness parameter Z2and the JRC[J]. Rock Mechanics andRock Engineering，2015，48(1)：387-396.
[15]	夏才初. 工程岩体节理力学[M].上海：同济大学出版社，2002：26-33.(XIA Caichu. Jointmechanics of engineering rock mass[M].Shanghai：Tongji University Press，2002：26-33.(in Chinese))