基于3D-ILC三点弯脆性固体内裂纹扩展规律及破坏特征研究

doi:10.13722/j.cnki.jrme.2019.0358

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1354 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Crack propagation in rocks is one of the important issues in geotechnical engineering. Based on 3D-ILC technology，an ideal brittle material is selected，and the actual internal crack with arbitrary parameter is generated without affecting the surface of the sample. The three-point bending test of ideal brittle material samples containing actual random internal cracks generated without changing the sample surface was carried out and compared with the complete samples. Failure process，characteristic load，failure mode，fracture characteristics，dynamic bifurcation and stress moire were analyzed，and the K-distribution and extension path of the crack tip were obtained by numerical simulation. The results show that the cracking and breaking loads of the specimen are reduced greatly due to the existence of internal cracks，and that the internal crack tip presents petal-like strain moire which can be monitored by the stress birefringence technology combined with 3D-ILC. Under three-point bending，the blank specimens occur dynamic fractures with atomization，feather zone characteristics caused by dynamic crack bifurcation，while the crack-containing specimens gradually crack from the lower tip to the upper tip of the internal crack of a pure type–I failure in a drop-like shape with characteristics of the intersection Wallner line. It is also indicated that both the K-distribution at the crack tip based on M-integral and MTS-based internal crack propagation path simulation are consistent with the test results. Compared with the current mainstream methods in the study of transparent rock，3D-ILC has certain advancement in brittleness，crack authenticity，stress field visualization and fracture characteristics. The test and numerical simulation results will provide experimental and theoretical references for research on problems including internal crack propagation and three-dimensional fracture of brittle materials such as rock.

Key words： rock mechanics 3D-ILC three-point bending test fracture mechanics crack propagation brittle material three-dimensional fracture

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Haijun1
	LI Hanzhang1
	2
	REN Ran3
	TANG Lei1
	YU Shuyang1
	2
	ZHANG Zhitao1

Cite this article:

WANG Haijun1,LI Hanzhang1,2, et al. Three-point bending test study on the propagation law of internal cracks and failure characteristics of brittle solids based on 3D-ILC technology#br#[J]. , 2019, 38(12): 2463-2477.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2019.0358 OR https://rockmech.whrsm.ac.cn/EN/Y2019/V38/I12/2463

[1]	GRIFFITH A A. The phenomena of rupture and flow in solids[J]. Philosophical Transactions of the Royal Society of London，1921，221(2)：163-198.
[2]	余寿文. 断裂力学的历史发展与思考[J]. 力学与实践，2015，37(3)：390-394.(YU Shouwen. The historical development of fracture mechanics and rethinking[J]. Mechanics in Engineering，2015，37(3)：390-394.(in Chinese))
[3]	李术才，李廷春，王刚，等. 单轴压缩作用下内置裂隙扩展的CT扫描试验[J]. 岩石力学与工程学报，2007，26(3)：484-492.(LI Shucai，LI Tingchun，WANG Gang，et al. CT real-time scanning tests on rock specimens with artificial initial crack under uniaxial conditions[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(3)：484-492.(in Chinese))
[4]	李术才，杨磊，李明田，等. 三维内置裂隙倾角对类岩石材料拉伸力学性能和断裂特征的影响[J]. 岩石力学与工程学报，2009，28(2)：281-289.(LI Shucai，YANG Lei，LI Mingtian，et al. Influence of 3D internal crack dipangle on tensile mechanical properties and fracture features of rock-like material[J]. Chinese Journal of Rock Mechanics and Engineering，2009，28(2)：281-289.(in Chinese))
[5]	李廷春. 三维裂隙扩展的CT试验及理论分析研究[博士学位论文][D]. 武汉：中国科学院武汉岩土力学研究所，2005.(LI Tingchun. CT testing analysis and theoretical study on prapagation of penny shaped 3-D fracture under compression[Ph. D. Thesis][D]. Wuhan：Wuhan Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，2005.(in Chinese))
[6]	李廷春，吕海波，王辉. 单轴压缩载荷作用下双裂隙扩展的CT扫描试验[J]. 岩土力学，2010，31(1)：9-14.(LI Tingchun，LV Haibo，WANG Hui. CT real-time scanning tests on double cracks propagation under uniaxial compression[J]. Rock and Soil Mechanics，2010，31(1)：9-14.(in Chinese))
[7]	李廷春，李术才. 用于裂隙岩石试验的陶瓷试件三维内置裂隙制造方法[P]. 中国：CN1803719，2006-07-19.(LI Tingchun，LI Shucai. Three-dimensional built-in crack manufacturing method for ceramic test piece for fracture rock test[P]. China：CN1803719，2006-07-19.(in Chinese))
[8]	尚黎明，李廷春，陈伟，等. 岩石三维内置裂隙的尺寸效应研究[J]. 武汉理工大学学报，2015，37(8)：72-77.(SHANG Liming，LI Tingchun，CHEN Wei，et al. Research on size effect of three-dimensional internal crack in rocks[J]. Journal of Wuhan University of technology，2015，37(8)：72-77.(in Chinese))
[9]	JIANG C，ZHAO G F，ZHU J，et al. Investigation of dynamic crack coalescence using a gypsum-like 3D printing material[J]. Rock Mechanics and Rock Engineering，2016，49(10)：3 983-3 998.
[10]	DYSKIN A V，GERMANOVICH L N，JEWELL R J，et al. Some experimental results on three-dimensional crack propagation in compression[C]// Proceedings of the 1995 2nd International Conference on the Mechanics of Jointed and Faulted Rock-MJFR-2. [S. l.]：[s. n.]，1995：91-96.
[11]	FU J，ZHU W，ZHANG X，et al. Fracturing experiment and numerical simulation study on new material containing a hollow internal crack under internal water pressure[J]. Advanced Engineering Sciences，2017，49(4)：78-85.
[12]	叶伟. 透明脆性岩石相似材料内置三维裂纹扩展试验研究[硕士学位论文][D]. 重庆：重庆大学，2016.(YE Wei. Experimental study of internal 3D crack propagation in brittle and transparent rock-like material[M. S. Thesis][D]. Chongqing：Chongqing University，2016. (in Chinese))
[13]	刘华博. 预制裂纹类岩石材料裂纹扩展规律及3D打印技术应用[博士学位论文][D]. 北京：中国矿业大学(北京)，2018.(LIU Huabo. Crack propagation law of prefabricated flaw in rock like materials and the application of 3D printing technology[Ph. D. Thesis][D]. Beijing：China University of Mining and Technology(Beijing)，2018.(in Chinese))
[14]	ADAMS M，SINES G. Crack extension from flaws in a brittle material subjected to compression[J]. Tectonophysics，1978，49(1)：97-118.
[15]	DYSKIN A，JEWELL R，JOER H，et al. Experiments on 3-D crack growth in uniaxial compression[J]. International Journal of Fracture Mechanics，1994，65(4)：77-83.
[16]	WANG H，DYSKIN A，PASTERNAK E，et al. Effect of the intermediate principal stress on 3-D crack growth[J]. Engineering Fracture Mechanics，2018，204：404-420.
[17]	ZHOU X P，ZHANG J Z，WONG L N Y. Experimental study on the growth，coalescence and wrapping behaviors of 3D cross-embedded flaws under uniaxial compression[J]. Rock Mechanics and Rock Engineering，2018，51(5)：1 379-1 400.
[18]	FU J W，CHEN K，ZHU W S，et al. Progressive failure of new modelling material with a single internal crack under biaxial compression and the 3-D numerical simulation[J]. Engineering Fracture Mechanics，2016，165：140-152.
[19]	FU J W，LIU S L，ZHU W S，et al. Experiments on failure process of new rock-like specimens with two internal cracks under biaxial loading and the 3-D simulation[J]. Acta Geotechnica，2018，13(4)：853-867.
[20]	朱珍德，林恒星，孙亚霖. 透明类岩石内置三维裂纹扩展变形试验研究[J]. 岩土力学，2016，37(4)：913-921.(ZHU Zhende，LIN Hengxing，SUN Yalin. An experimental study of internal 3D crack propagation and coalescence in transparent rock[J]. Rock and Soil Mechanics，2016，37(4)：913-921.(in Chinese))
[21]	TANG H D，ZHU Z D，ZHU M L，et al. Mechanical behavior of 3D crack growth in transparent rock-like material containing preexisting flaws under compression[J]. Advances in Materials Science and Engineering，2015：1-10.
[22]	杨磊，梅洁，李术才，等. 水力耦合作用下岩体3维裂隙的起裂扩展模式研究[J]. 工程科学与技术，2018，50(6)：174-183. (YANG Lei，MEI Jie，LI Shucai，et al. Research on the initiation and propagation modes of 3-D crack under hydro-mechanical coupling[J]. Advanced Engineering Sciences，2018，50(6)：174-183.(in Chinese))
[23]	JU Y，XIE H，ZHENG Z，et al. Visualization of the complex structure and stress field inside rock by means of 3D printing technology[J]. Chinese Science Bulletin，2014，59(36)：5 354-5 365.
[24]	KOTZ F，ARNOLD K，BAUER W，et al. Three-dimensional printing of transparent fused silica glass[J]. Nature，2017，544：337-339.
[25]	王海军，张九丹，任然，等. 基于电磁场-介质损伤的三维深埋裂纹3D-ILC实现[J]. 岩土工程学报，2019，41(12)：1-8.(WANG Haijun，ZHANG Jiudan，REN Ran，et al. Embedded crcaks in materials induced by 3D-ILC[J]. Chinese Journal of Geotechnical Engineering，2019，41(12)：1-8.(in Chinese))
[26]	王海军，郁舒阳，任然，等. 基于3D-ILC含三维内裂纹孔口脆性固体断裂特性试验[J]. 岩土力学，2019，40(6)：1-13.(WANG Haijun，YU Shuyang，REN Ran，et al. Fracture characteristics of Brazilian disk with fully internal crack based on 3D-ILC[J]. Rock and Soil Mechanics，2019，40(6)：1-13.(in Chinese))
[27]	李世愚，和泰名，尹祥础. 岩石断裂力学导论[M]. 合肥：中国科学技术大学出版社，2010：6-7.(LI Shiyu，HE Taiming，YIN Xiangchu. Introduction of rock fracture mechanics[M]. Hefei：University of Science and Technology of China Press，2010：6-7.(in Chinese))
[28]	谢和平，高峰. 岩石类材料损伤演化的分形特征[J].岩石力学与工程学报，1991，10(1)：74-82.(XIE Heping，GAO Feng. The fractal features of the damage evolution of rock materials[J]. Chinese Journal of Rock Mechanics and Engineering，1991，10(1)：74-82.(in Chinese))
[29]	QUINN G D. Fractography of Ceramics and Glasses[M]. [National Institute of Standards and Technology]：National Institute of Standards and Technology，2016：185-186.
[30]	LAWN B. 脆性固体断裂力学[M]. 北京：高等教育出版社，2009：78-82.(LAWN B. Fracture of brittle solids[M]. Beijing：Higher Education Press，2009：78-82.(in Chinese))
[31]	DYSKIN A V，SAHOURYEH E，JEWELL R J，et al. Influence of shape and locations of initial 3-D cracks on their growth in uniaxial compression[J]. Engineering Fracture Mechanics，2003，70(15)：2 115-2 136.
[32]	王海军，张九丹，任然，等. 基于3D-ILC含不同角度内裂纹圆盘断裂特性研究[J]. 岩土工程学报，2019，41(9)：1-10.(WANG Haijun，ZHANG Jiudan，REN Ran，et al. Fracture characteristics of Brazilian disk with fully internal crack based on 3D-ILC[J]. Chinese Journal of Geotechnical Engineering，2019，41(9)：1-10.(in Chinese))
[33]	徐叶邦. 石英断口Wallner线、河流花样、疲劳纹SEM特征及其在地震研究上的意义[J]. 四川地震，1987，(3)：42-45.(XU Yebang. SEM Characteristics of Wallner line，river pattern and fatigue grain on quartz fracture and its significance in earthquake research[J]. Earthquake Research in Sichuan，1987，(3)：42-45.(in Chinese))
[34]	BANKS S L，WAWRZYNEK P A，CARTER B，et al. Methods for calculating stress intensity factors in anisotropic materials：Part II—Arbitrary geometry[J]. Engineering Fracture Mechanics，2007，74(8)：1 293-1 307.
[35]	CHANG J H，CHIEN A J. Evaluation of M-integral for anisotropic elastic media with multiple defects[J]. International Journal of Fracture Mechanics，2002，114(3)：267-289.
[36]	VAN D P，BEN A，MARSHAK S，et al. Earth structure ：an introduction to structural geology and tectonics[M]. New York：W.W. Norton & Co.，2010：142-143.