实时高温真三轴试验系统的研制与应用

doi:10.13722/j.cnki.jrme.2018.1216

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (825 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To investigate rock mechanical properties under high temperature and stress coupling，which is one of the research hotspots in the field of deep resource exploitation，a real-time high-temperature true triaxial test system was developed. The system，mainly composed of three subsystems including rigidity mechanical loading system，high temperature control system and servo control and data acquisition system，can realistically simulate the thermal-stress coupling environment of deep rock masses and perform various stress paths such as uniaxial，conventional triaxial，true triaxial，creep，cyclic loading and unloading with a standard rock sample of 50 mm×50 mm×100mm at a highest rock sample surface temperature of 460 ℃. The maximum loads of three loading directions(?1，?2，?3) which can be independently controlled are respectively 1 000 MPa，200 MPa and 200 MPa. The high temperature control system consists of a six-circuit detachable flexible heating element and an aerogel insulation cover，of which each circuit is separately monitored by the temperature control box to realize real-time heating and monitoring of rock samples. Thermoplastic mold steel and water-cooled circulation system is used to ensure the overall rigidity and working stability of the test system at a high temperature，and high-precision closed-loop servo control system with magnetic displacement sensors can accurately monitor displacement and pressure in three directions for multiple stress path tests at a high temperature in real time. High temperature in real time true triaxial tests were conducted and the effect of temperature and intermediate principal stress(?2) on mechanical properties of granite were studied. It is shown that 400 ℃ temperature can enhance the strength and elastic modulus of granite and that the intermediate principal stress(?2) can enhance the strength and peak strain of granite at 400 ℃ temperature. Meanwhile，the intermediate principal stress(?2) can enhance the strength but decrease the peak strain in the third main stress direction of granite at RT. The reliability and stability of the high temperature in real time true triaxial test system were verified by comparing the test results by the developed system and the conventional triaxial test system，and the research results can provide theoretical and technical supports for the development and utilization of dry hot rock resources，nuclear waste repository construction and deep rock mass engineering.

Key words： rock mechanics real-time high-temperature true triaxial test system thermal-stress coupling granite high temperature intermediate principal stress

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MA Xiao1
	2
	MA Dongdong1
	HU Dawei1
	ZHOU Hui1
	CHEN Sili2
	YU Zhipeng3
	TAN Xianfeng4

Cite this article:

MA Xiao1,2,MA Dongdong1, et al. A real-time high-temperature true triaxial test system and its application[J]. , 2019, 38(8): 1605-1614.

URL:

http://www.rockmech.org/EN/10.13722/j.cnki.jrme.2018.1216 OR http://www.rockmech.org/EN/Y2019/V38/I8/1605

[2]	汪集旸，胡圣标，庞忠和，等. 中国大陆干热岩地热资源潜力评估[J]. 科学导报，2012，30(32)：25-31.(WANG Jiyang，HU Shengbiao，PANG Zhonghe，et al. Estimate of geothermal resources potential for hot dry rock in the continental area of China[J]. Science and Technology Review，2012，30(32)：25-31.(in Chinese))
[5]	朱合华，闫治国，邓涛，等. 3种岩石高温后力学性质的试验研究[J]. 岩石力学与工程学报，2006，25(10)：1 945-1 950.(ZHU Hehua，YAN Zhiguo，DENG Tao，et al. Testing study on mechanical properties of tuff，granite and breccia after high temperature[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(10)：1 945-1 950.(in Chinese))
[7]	张帆，胡维，张翰群，等. 热处理后花岗岩纳米压痕试验研究[J]. 岩土力学，2018，39(增1)：235-243.(ZHANG Fan，HU Wei，ZHANG Hanqun，et al. Nanoindentation tests on granite after heat treatment[J]. Rock and Soil Mechanics，2018，39(Supp1)：235-243. (in Chinese))
[9]	刘泉声，许锡昌，山口勉，等. 三峡花岗岩与温度及时间相关的力学性质试验研究[J]. 岩石力学与工程学报，2001，20(5)：715-719.(LIU Quansheng，XU Xichang，YAMAGUCHI Tsutomo，et al. Testing study on mechanical properties of the three gorges granite concerning temperature and time[J]. Chinese Journal of Rock Mechanics and Engineering，2001，20(5)：715-719.(in Chinese))
[10]	武晋文，赵阳升，万志军，等. 高温均匀压力花岗岩热破裂声发射特性实验研究[J]. 煤炭学报，2012，37(7)：1 111-1 117.(WU Jinwen，ZHAO Yangsheng，WAN Zhijun，et al. Experimental study of acoustic emission of granite due to thermal cracking under high temperature and isostatic stress[J]. Chinese Journal of Rock Mechanics and Engineering，2012，37(7)：1 111-1 117.(in Chinese))
[12]	吴刚，王德咏，翟松韬，等. 12力学性质的试验研究[J]. 岩石力学与工程学报，2012，31(6)：1 237-1 244.(WU Gang，WANG Deyong，ZHAI Songtao，et al. Test research on mechanical properties of marble under high temperature[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(6)：1 237-1 244.(in Chinese))
[8]	徐小丽，高峰，高亚楠，等. 高温后花岗岩力学性质变化及结构效应研究[J]. 中国矿业大学学报，2008，37(3)：402-406.(XU Xiaoli，GAO Feng，GAO Yanan，et al. Effect of high temperatures on the mechanical characteristics and crystal structure of granite[J]. Journal of China University of Mining and Technology，2008，37(3)：402-406.(in Chinese))
[18]	徐小丽，高峰，张志镇，等. 实时高温下加载速率对花岗岩力学特性影响的试验研究[J]. 岩土力学，2015，36(8)：2 184-2 192.(XU Xiaoli，GAO Feng，ZHANG Zhizhen，et al. Experimental study of the effect of loading rates on mechanical properties of granite at real-time high temperature[J]. Rock and Soil Mechanics，2015，36(8)：2 184-2 192. (in Chinese))
[15]	张希巍，冯夏庭，孔瑞，等.硬岩应力-应变曲线真三轴仪研制关键技术研究[J]. 岩石力学与工程学报，2017，36(11)：2 629-2 640. (ZHANG Xiwei，FENG Xiating，KONG Rui，et al. Key technology in development of true triaxial apparatus to determine stress-strain curves for hard rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(11)：2 629-2 640.(in Chinese))
[17]	刘石，许金余，刘志群，等. 温度对岩石强度及损伤特性的影响研究[J]. 采矿与安全工程学报，2013，30(4)：583-588.(LIU Shi，XU Jinyu，LIU Zhiqun，et al. Temperature effect on strength and damage property of rock mass[J]. Journal of Mining and Safety Engineering，2013，30(4)：583-588.(in Chinese))
[4]	秦严. 高温后花岗岩物理力学性质试验研究[硕士学位论文][D]. 北京：中国地质大学(北京)，2017.(QIN Yan. High-temperature influence on physical and mechanical properties of diorite[M. S. Thesis][D]. Beijing：China University of Geosciences(Beijing)，2017.(in Chinese))
[14]	何浩宇，石露，李小春，等. 基于新型茂木式试验机的真三轴试验及加载边界效应研究[J]. 岩石力学与工程学报，2015，34(增1)：2 837-2 844.(HE Haoyu，SHI Lu，LI Xiaochun，et al. True triaxial tests with mogi-type true triaxial test apparatus and it?s loading boundary effect[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(Supp.1)：2 837-2 844.(in Chinese))
[6]	SELAHATTIN A，MURAT K，ABBAS T，et al. Effects of thermal damage on strain burst mechanism for brittle rocks under true-triaxial loading conditions[J]. Rock Mechanics and Rock Engineering，2018，51(6)：1 657-1 682.
[16]	周辉，孟凡震，卢景景，等. 硬岩裂纹起裂强度和损伤强度取值方法探讨[J]. 岩土力学，2014，35(4)：913-925.(ZHOU Hui，MENG Fanzhen，LU Jingjing，et al. Discussion on methods for calculating crack initiation strength and crack damage strength for hard rock[J]. Rock and Soil Mechanics，2014，35(4)：913-925.(in Chinese))
[1]	高平. 岩石热物性参数分析及多场热效应耦合模型研究[博士学位论文][D]. 吉林：吉林大学，2015.(GAO Ping. Analysis of rock thermal physical parameters and research on multi-field thermal effect coupled model[Ph. D. Thesis][D]. Jilin：Jilin University，2015.(in Chinese))
[3]	许天福，张延军，曾昭发，等. 增强型地热系统(干热岩)开发技术进展[J]. 科学导报，2012，30(32)：42-45.(XU Tianfu，ZHANG Yanjun，ZENG Shaofa，et al. Technology progress in an enhanced geothermal system(hot dry rock)[J]. Science and Technology Review，2012，30(32)：42-45.(in Chinese))
[13]	翟松韬，吴刚，孙红，等. 高温下大理岩的声发射特性试验研[J]. 岩土力学，2013，35(2)：177-183.(ZHAI Songtao，WU Gang，SUN Hong，et al. Acoustic emission characteristics of thermal cracking of marble under uniaxial compression[J]. Rock and Soil Mechanics，2013，35(2)：177-183.(in Chinese))
[11]	赵阳升，万志军，张渊，等. 20 MN伺服控制高温高压岩体三轴试验机的研制[J]. 岩石力学与工程学报，2008，27(1)：1-8.(ZHAO Yangsheng，WAN Zhijun，ZHANG Yuan，et al. Research and development of 20 MN servo-controlled rock triaxial testing system with high temperature and high pressure[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(1)：1-8.(in Chinese))