考虑几何形貌特征的粗糙岩体裂隙渗流特性研究

doi:10.13722/j.cnki.jrme.2018.1282

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (481 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To study the influence of geometrical morphology on the seepage properties of rough fracture，the three dimensional rough fracture surface is generated according to the midpoint interpolation method. A lattice Boltzmann model is proposed to simulate the seepage of rock fracture，and its validity is verified by an example. Finally，the effects of geometrical morphology on pressure drop are discussed for rock fracture with single rough surface. The results show that the distribution of average pressure drop between the adjacent nodes is similar to the fluctuation height of fracture surface along the seepage direction，the average pressure drop increases at the location where the fracture surface raises，and decreases in the sunken region. The influence of geometrical morphology on the local pressure drop is different for the position with different distances to the fracture surface，the closer to the fracture surface，the more sensitive of the geometrical morphology to the local pressure drop，especially in the area where the fracture surface fluctuates sharply. The inlet velocity also affects the average pressure drop，the larger flow velocity results in the greater resistance of the rough wall to the fluid and the corresponding energy loss，the more significant pressure drop is generated as a result. Under the laminar flow regime，the inlet velocity is approximately linear with the average pressure drop.

Key words： rock mechanics rock fracture seepage geometrical morphology lattice Boltzmann method relative roughness

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	SHEN Linfang1
	ZENG Ye1
	WANG Zhiliang1
	LI Shaojun2

Cite this article:

SHEN Linfang1,ZENG Ye1,WANG Zhiliang1, et al. Research on seepage properties of rough fracture considering geometrical morphology[J]. , 2019, 38(S1): 2704-2711.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2018.1282 OR http://rockmech.whrsm.ac.cn/EN/Y2019/V38/IS1/2704

[4]	LOMIZE G M. Flow in fractured rock[M]. Moscow：Gosemergoizdat，1951：127–129.
[20]	MOHAMAD A A. Lattice Boltzmann method：fundamentals and engineering applications with computer codes[M]. London：Springer- Verlag，2011：84–89.
[1]	王华俊. 锦屏二级水电站闸基深厚覆盖层渗流分析与控制研究[硕士学位论文][D]. 成都：成都理工大学，2005.(WANG Huajun. Study on seepage flow and control of deep and thick overburden of sluice foundation in the Jinping II hydropower station[M. S. Thesis][D]. Chengdu：Chengdu University of Technology，2005.(in Chinese))
[7]	速宝玉，詹美礼，赵坚. 仿天然岩体裂隙渗流的实验研究[J] 岩土工程学报，1995，17(5)：19–24.(SU Baoyu，ZHAN Meili，ZHAO Jian. Study on fracture seepage in the limitative nature rock[J]. Chinese Journal of Geotechnical Engineering，1995，17(5)：19–24. (in Chinese))
[9]	吴金花. 具有分形表面裂隙的渗流特性研究[硕士学位论文][D]. 大连：大连理工大学，2010.(WU Jinhua. Hydraulic characteristics of fracture with fractal surface[M. S. Thesis][D]. Dalian：Dalian University of Technology，2010.(in Chinese))
[11]	刘晓丽，王恩志，王思敬，等. 裂隙岩体表征方法及岩体水力学特性研究[J]. 岩石力学与工程学报，2008，27(9)：1 814–1 821. (LIU Xiaoli，WANG Enzhi，WANG Sijing，et al. Representation method of fractured rock mass and its hydraulic properties study[J]. Chinese Journal of Rock Mechanics Engineering，2008，27(9)：1 814–1 821. (in Chinese))
[17]	FOURNIER A，FUSSELL D，CARPENTER L. Computer rendering of stochastic models[J]. Communications of the ACM，1982，25(6)：371–384.
[19]	QIAN Y H，D?HUMIERES D，LALLEMAND P. Lattice BGK models for Navier-Stokes equation[J]. Europhysics Letters，1992，17(6)：479–484.
[21]	朱红光，谢和平，易成，等. 破断岩体裂隙的流体流动特性分析[J]. 岩石力学与工程学报，2013，32(4)：657–663.(ZHU Hongguang，XIE Heping，YI Cheng，et al. Analysis of properties of fluid flow in Rock fractures[J]. Chinese Journal of Rock Mechanics Engineering，2013，32(4)：657–663.(in Chinese))
[5]	Neuzil C E，Tracy J V. Flow through fractures[J]. Water Resources Research，1981，17(1)：191–199.
[15]	张戈，冯程远，龚文波，等. 粗糙元对单裂隙渗流影响的格子Boltzmann方法模拟及分析[J]. 中国科学：物理学力学天文学，2017，47(2)：024701. (ZHANG Ge，FENG Chengyuan，GONG Wenbo，et al. Simulation and analysis of the effect of roughness elements on fluid flow through single fracture based on lattice Boltzmann method[J]. Scientia Sinica Physica，Mechanica and Astronomica，2017，47(2)：024701.(in Chinese))
[2]	孙可明，辛利伟，翟诚，等. 考虑三维形貌特征粗糙裂隙加卸载渗规律研究[J]. 岩土力学，2016，37(增2)：161–166.(SUN Keming，XIN Liwei，ZHAI Cheng，et al. Seepage law of rough fracture during loading-unloading process considering 3D topography characteristics[J]. Rock and Soil Mechanics，2016，37(Supp.2)：161–166.(in Chinese))
[3]	王刚，黄娜，蒋宇静，等. 考虑分形特征的节理面渗流计算模型[J]. 岩石力学与工程学报，2014，33(增2)：3 397–3 405.(WANG Gang，HUANG Na，JIANG Yujing，et al. Seepage calculation model for rough joint surface considering fractal characteristics[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(Supp.2)：3 397–3 405.(in Chinese))
[6]	AMADEI B，ILLANGASEKARE T. A mathematical model for flow and solute transport in non-homogeneous rock fracture[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1994，31(6)：719–731.
[8]	肖维民，夏才初，王伟. 考虑三维形貌特征的粗糙节理渗流空腔模型研究[J]. 岩石力学与工程学报，2011，30(增2)：3 786–3 795. (XIAO Weimin，XIA Caichu，WANG Wei. Study of void model for fluid flow through rough joint by considering 3D topography characteristics[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(Supp.2)：3 786–3 795.(in Chinese))
[10]	周创兵，叶自桐，韩冰. 岩石节理面形态与水力特性研究[J]. 水科学进展，1997，8(3)：233–239.(ZHOU Chuangbing，YE Zitong，HAN Bing. A study on configulation and hydraulic conductivity of rock joints[J]. Advances in Water Science，1997，8(3)：233–239.(in Chinese))
[13]	谭云亮，尹延春，滕桂荣，等. 基于Lattice Boltzmann方法的瓦斯渗流模拟研究[J]. 煤炭学报，2014，39(8)：1 446–1 454.(TAN Yunliang，YIN Yanchun，TENG Guirong，et al. Simulation research of gas seepage based on Lattice Boltzmann method[J]. Journal of China Coal Society，2014，39(8)：1 446–1 454.(in Chinese))
[14]	盛金昌，王璠，张霞，等. 格子Boltzmann方法研究岩石粗糙裂隙渗流特性[J]. 岩土工程学报，2014，36(7)：1 213–1 217. (SHENG Jinchang，WANG Fan，ZHANG Xia，et al. Lattice Boltzmann method for rough fracture seepage characteristics of rock[J]. Chinese Journal of Geotechnical Engineering，2014，36(7)：1 213–1 217.(in Chinese))
[16]	樊火，郑宏. 基于MRT-LBM的分形裂隙网络渗流数值模拟[J]. 中国科学：技术科学，2013，43(12)：1 338–1 345.(FAN Huo，ZHENG Hong. MRT-LBM-based numerical simulation of seepage flow through fractal fracture networks[J]. Scientia Sinica Technologica，2013，43(12)：1 338–1 345.(in Chinese))
[18]	张有天. 岩石水力学与工程[M]. 北京：中国水利水电出版社，2005：63–66.(ZHANG Youtian. Rock hydraulics and engineering[M]. Beijing：China Water and Power Press，2005：63–66.(in Chinese))
[12]	周宏伟，谢和平. 岩体中渗流形貌演化的随机理论描述[J]. 岩土工程学报，2001，23(2)：183–186.(ZHOU Hongwei，XIE Heping. Approach to evolution of the shape of fluid flow in rocks by stochastic theory[J]. Chinese Journal of Geotechnical Engineering，2001，23(2)：183–186.(in Chinese))