地下工程围岩数字钻探测试系统研发与应用

doi:10.13722/j.cnki.jrme.2019.0744

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (907 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The mechanical parameters and structural characteristics of rock masses are the basis of stability analysis of underground engineering，and real-time obtaining surrounding rock parameters are very important for support design. Complex geological conditions such as high stress and extremely soft rock，resulting in loose and broken surrounding rock，are often encountered during underground engineering construction，and bolt-grouting support is an effective method to control the fractured surrounding rock. The mechanical property of the surrounding rock before and after grouting is the basis for the design of bolt-grouting parameters. The digital drilling test technique provides a new way to real-time obtain the surrounding rock parameters and to quantitatively evaluate the bolt-grouting effect. Based on the previous drilling theory of rock mechanics，the development of multi-function true triaxial rock drilling test system(indoor TRD system) and a large number of indoor tests，an intrinsically safe surrounding rock digital drilling test system of underground engineering(Site SDT system) is developed，and digital drilling tests on layered rock masses composed of different combinations of intact，fractured and grouted rock layers are conducted based on site SDT system. The test results show that the site SDT system has an excellent controlling and monitoring performance and highly matches with the indoor TRD system. The response of the drilling parameters at rock layer interfaces is obvious，and the average values of difference value ratios of equivalent uniaxial compressive strength，cohesion and internal friction angle obtained from site SDT system test and indoor rock mechanics test are less than 15%. The equivalent uniaxial compressive strength of fractured rock stratum after grouting is 3.5 times of that before grouting obtained by site SDT system test. Site SDT system can accurately identify rock layer interfaces，test equivalent rock mechanical parameters in real time and quantitatively evaluate the grouting effect of fractured rock masses.

Key words： rock mechanics digital drilling test system rock mass parameters fractured surrounding rock grouting evaluation

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Qi1
	2
	GAO Hongke1
	2
	JIANG Zhenhua1
	LI Shucai1
	JIANG Bei1
	2
	3

Cite this article:

WANG Qi1,2,GAO Hongke1, et al. Development and application of a surrounding rock digital drilling test system of underground engineering[J]. , 2020, 39(2): 301-310.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2019.0744 OR http://rockmech.whrsm.ac.cn/EN/Y2020/V39/I2/301

[2]	WU X Z，JIANG Y J，LI B. Influence of joint roughness on the shear behaviour of fully encapsulated rock bolt[J]. Rock Mechanics and Rock Engineering，2018，51(3)：953-959.
[4]	付志亮，王亮. 煤层顶底板岩石点荷载强度与拉压强度对比试验研究[J]. 岩石力学与工程学报，2013，32(1)：88-96.(FU Zhiliang，WANG Liang. Comparative experimental research on point load strength，uniaxial compressive strength and tensile strength for rocks in roof and floor of coal seam[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(1)：88-96.(in Chinese))
[6]	刘仰鹏，贺少辉，汪大海，等. 基于空间插值的工程岩体RQD预测方法[J]. 岩土力学，2015，36(11)：3 329-3 336.(LIU Yangpeng，HE Shaohui，WANG Dahai，et al. RQD prediction method of engineering rock mass based on spatial interpolation[J]. Rock and Soil Mechanics，2015，36(11)：3 329-3 336.(in Chinese))
[8]	李浩然，杨春和，刘玉刚，等. 单轴荷载作用下盐岩声波与声发射特征试验研究[J]. 岩石力学与工程学报，2014，33(10)：2 107-2 116. (LI Haoran，YANG Chunhe，LIU Yugang，et al. Experimental study of ultrasonic velocity and acoustic emission properties of salt rock under uniaxial compression load[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(10)：2 107-2 116.(in Chinese))
[9]	严鹏，张晨，高启栋，等. 不同损伤程度下岩石力学参数变化的声波测试[J]. 岩土力学，2015，36(12)：3 425-3 432.(YAN Peng，ZHANG Chen，GAO Qidong，et al. Acoustic wave test on mechanical properties variation of rocks under different damage degrees[J]. Rock and Soil Mechanics，2015，36(12)：3 425-3 432.(in Chinese))
[12]	胡盛斌，徐国元，马富安，等. 基于天线收发距的盾构壁后注浆雷达探测试验研究[J]. 中南大学学报：自然科学版，2019，50(2)：360-367.(HU Shengbin，XU Guoyuan，MA Fuan，et al. Experimental study on antenna spacing of ground penetrating radar detection of grouting material behind shield segment[J]. Journal of Central South University：Science and Technology，2019，50(2)：360-367.(in Chinese))
[14]	WANG Q，QIN Q，JIANG B，et al. Study and engineering application on the bolt-grouting reinforcement effect in underground engineering with fractured surrounding rock[J]. Tunnelling and Underground Space Technology，2019，84：237-247.
[16]	SHI Z M，LIU L，PENG M，et al. Non-destructive testing of full-length bonded rock bolts based on HHT signal analysis[J]. Journal of Applied Geophysics，2018，151：47-65.
[19]	KAHRAMAN S，BILGIN N，FERIDUNOGLU C. Dominant rock properties affecting the penetration rate of percussive drills[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(5)：711-723.
[22]	岳中琦. 钻孔过程监测(DPM)对工程岩体质量评价方法的完善与提升[J]. 岩石力学与工程学报，2014，33(10)：1 977-1 996.(YUE Zhongqi. Drilling process monitoring for refining and upgrading rock mass quality classification methods[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(10)：1 977-1 996.(in Chinese))
[24]	CHEN J，YUE Z Q. Ground characterization using breaking- action-based zoning analysis of rotary-percussive instrumented drilling[J]. International Journal of Rock Mechanics and Mining Sciences，2015，75：33-43.
[26]	YASAR E，RANJITH P G，VIETE D R. An experimental investigation into the drilling and physico-mechanical properties of a rock-like brittle material[J]. Journal of Petroleum Science and Engineering，2011，76(3)：185-193.
[29]	宋玲，李宁，刘奉银. 较硬地层中旋进触探技术应用可行性研究[J]. 岩土力学，2011，32(2)：635-640.(SONG Ling，LI Ning，LIU Fengyin. Research on applicable feasibility of rotary penetration technique in harder strata[J]. Rock and Soil Mechanics，2011，32(2)：635-640.(in Chinese))
[32]	WANG Q，GAO H K，JIANG B，et al. Relationship model for the drilling parameters from a digital drilling rig versus the rock mechanical parameters and its application[J]. Arabian Journal of Geosciences，2018，11：357.
[34]	何明明. 基于旋切触探技术的岩体力学参数预报研究[博士学位论文][D]. 西安：西安理工大学，2017.(HE Mingming. Research on the prediction of rock mass mechanics characteristics based on the rotary penetration technology[Ph. D. Thesis][D]. Xi¢an：Xi¢an University of technology，2017.(in Chinese))
[36]	WANG Q，GAO S，LI S C，et al. Upper bound analytic mechanics model for rock cutting and its application in field testing[J]. Tunnelling and Underground Space Technology，2018，73：287-294.
[7]	ZHANG L Y. Determination and applications of rock quality designation(RQD)[J]. Journal of Rock Mechanics and Geotechnical Engineering，2016，8(3)：389-397.
[17]	YANG W W，YUE Z Q，THAM L G. Automatic monitoring of inserting or retrieving SPT sampler in drillhole[J]. Geotechnical Testing Journal，2012，35(3)：420-436.
[27]	谭卓英，岳中琦，谭国焕. 金刚石钻进比功及风化花岗岩实时分级研究[J]. 岩石力学与工程学报，2007，26(3)：478-483.(TAN Zhuoying，YUE Zhongqi，TAN Guohuan. Study on specific energy of diamond drilling and real-time classification of weathered granite[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(3)：478-483.(in Chinese))
[37]	YAHIAOUI M，PARIS J Y，DELBÉ K，et al. Independent analyses of cutting and friction forces applied on a single polycrystalline diamond compact cutter[J]. International Journal of Rock Mechanics and Mining Sciences，2016，85：20-26.
[5]	ELHAKIM A F. The use of point load test for Dubai weak calcareous sandstones[J]. Journal of Rock Mechanics and Geotechnical Engineering，2015，7(4)：452-457.
[15]	LUO H M，CHEN S X，YU B. Application of in-situ sonic wave test method in the effect evaluation of grouting treatment in Weak Rock[C]// Proceedings of the 7th International Conference on Environment and Engineering Geophysics and Summit Forum of Chinese Academy of Engineering on Engineering Science and Technology. [S. l.]：Atlantis Press，2016：250-253.
[3]	WANG Q，JIANG B，PAN R，et al. Failure mechanism of surrounding rock with high stress and confined concrete support system[J]. International Journal of Rock Mechanics and Mining Sciences，2018，102：89-100.
[10]	WANG Q，HE M C，YANG J，et al. Study of a no-pillar mining technique with automatically formed gob-side entry retaining for longwall mining in coal mines[J]. International Journal of Rock Mechanics and Mining Sciences，2018，110：1-8.
[13]	江贝，李术才，王琦，等. 三软煤层巷道破坏机制及锚注对比试验[J]. 煤炭学报，2015，40(10)：2 336-2 346.(JIANG Bei，LI Shucai，WANG Qi，et al. Failure mechanism of three soft coal seam roadway and comparison study on bolt and grouting[J]. Journal of China Coal Society，2015，40(10)：2 336-2 346.(in Chinese))
[20]	宋玲，李宁，刘奉银. 旋进式触探机制研究[J]. 岩石力学与工程学报，2010，29(增2)：3 519-3 525.(SONG Ling，LI Ning，LIU Fengyin. Study of mechanism of rotary penetration[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(Supp.2)：3 519- 3 525.(in Chinese))
[23]	VAN WYK G，ELS D N J，AKDOGAN G，et al. Discrete element simulation of tribological interactions in rock cutting[J]. International Journal of Rock Mechanics and Mining Sciences，2014，65(1)：8-19.
[30]	WANG Q，GAO S，JIANG B，et al. Rock-cutting mechanics model and its application based on slip-line theory[J]. International Journal of Geomechanics，2018，18(5)：1-10.
[33]	岳中琦，李焯芬，罗锦添，等. 香港大学钻孔过程数字监测仪在土钉加固斜坡工程中的应用[J]. 岩石力学与工程学报，2002，21(11)：1 685-1 690.(YUE Zhongqi，LI Zhuofen，LUO Jintian，et al. Application of digital monitoring instrument for drilling process of university of Hong Kong in slope reinforcement project with soil nails[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(11)：1 685-1 690.(in Chinese))
[1]	LIU Y，DAI F，DONG L，et al. Experimental investigation on the fatigue mechanical properties of intermittently jointed rock models under cyclic uniaxial compression with different loading parameters[J]. Rock Mechanics and Rock Engineering，2018，51(1)：47-68.
[11]	WANG Q，PAN R，JIANG B，et al. Study on failure mechanism of roadway with soft rock in deep coal mine and confined concrete support system[J]. Engineering Failure Analysis，2017，81：155-177.
[21]	王琦，秦乾，高红科，等. 基于数字钻探的岩石c-φ参数测试方法[J]. 煤炭学报，2019，44(3)：916-923.(WANG Qi，QIN Qian，GAO Hongke，et al. A testing method for rock c-φ parameter based on digital drilling test technology[J]. Journal of China Coal Society，2019，44(3)：916-923.(in Chinese))
[31]	王琦，秦乾，高松，等. 数字钻探随钻参数与岩石单轴抗压强度关系[J]. 煤炭学报，2018，43(5)：1 289-1 295.(WANG Qi，QIN Qian，GAO Song，et al. Relationship between rock drilling parameters and rock uniaxial compressive strength based on energy analysis[J]. Journal of China Coal Society，2018，43(5)：1 289-1 295.(in Chinese))
[18]	GUI M W，SOGA K，BOLTON M D，et al. Instrumented borehole drilling for subsurface investigation[J]. Journal of Geotechnical and Geoenvironmental Engineering，2002，128(4)：283-291.
[25]	KAHRAMAN S. Rotary and percussive drilling prediction using regression analysis[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(7)：981-989.
[35]	WANG Q，GAO H K，YU H C，et al. Method for measuring rock mass characteristics and evaluating the grouting-reinforced effect based on digital drilling[J]. Rock Mechanics and Rock Engineering，2019，52：841-851.
[28]	李宁，李骞，宋玲. 基于回转切削的岩石力学参数获取新思路[J]. 岩石力学与工程学报，2015，34(2)：323-329.(LI Ning，LI Qian，SONG Ling. Acquiring mechanical parameters of rock based on rotational cutting[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(2)：323-329.(in Chinese))
[38]	HUANG H，LECAMPION B，DETOURNAY E. Discrete element modeling of tool-rock interaction I：rock cutting[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2013，37(13)：1 913-1 929.