横观各向同性黏土的非正交弹塑性本构模型#br#

doi:10.13722/j.cnki.jrme.2019.0639

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (825 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract ：In order to describe the influence of soil anisotropy on stress-strain relationship，a non-orthogonal elastoplastic constitutive model of transversely isotropic clays is established based on the concept of the modified characteristic stress. Modelling procedures are as follows：(1) By referring to the modified stress method，the fabric tensor is introduced into the characteristic stress formula to incorporate the influence of anisotropic fabric. (2) Based on the frictional rule on the octahedral plane in the modified characteristic stress space，a transversely isotropic -strength criterion reflecting the effects of soil anisotropy and intermediate principal stress is established. (3) In the modified characteristic stress space，the inclined yield surface is adopted to describe the influence of the initial anisotropic consolidation stress condition on the yield characteristics of soil by introducing the volumetric associated hardening parameter，and (4) the incremental direction of the plastic strain of transversely isotropic clays is determined by the three-dimensional non-orthogonal plastic flow rule based on the fractional partial derivative. Only six material parameters are needed in the non-orthogonal elastoplastic model，which can be determined by conventional triaxial tests，and three model parameters are concerned in the proposed model，which can all be easily determined by the determined material parameters. The comparison between model predictions and experimental results shows that the model can reasonably capture the strength and deformation properties of transversely isotropic clays.

Key words： soil mechanics constitutive model anisotropy fabric tensor characteristic stress fractional calculus non-orthogonal flow rule

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LU Dechun
	HAN Jiayue
	LIANG Jingyu
	TIAN Yu
	DU Xiuli

Cite this article:

LU Dechun,HAN Jiayue,LIANG Jingyu, et al. Non-orthogonal elastoplastic constitutive model of transversely isotropic clay#br#[J]. , 2020, 39(4): 793-803.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2019.0639 OR http://rockmech.whrsm.ac.cn/EN/Y2020/V39/I4/793

[14]	TIAN Y，YAO Y P. A simple method to describe three-dimensional anisotropic failure of soils[J]. Computers and Geotechnics，2017，92：210-219.
[33]	LIANG J Y，LU D C，ZHOU X，et al. Non-orthogonal elastoplastic constitutive model with the critical state for clay[J]. Computers and Geotechnics，2019，116：103200.
[7]	ODA M. Fabric tensor for discontinuous geological materials[J]. Soils and Foundations，1982，22(4)：96-108.
[17]	姚仰平，田雨，刘林. 三维各向异性砂土UH模型[J]. 工程力学，2018，35(3)：49-55.(YAO Yangping，TIAN Yu，LIU Lin. Three-dimensional anisotropic uh model for sands[J]. Engineering Mechanics，2018，35(3)：49-55.(in Chinese))
[6]	PIETRUSZCZAK S，MROZ Z. Formulation of anisotropic failure criteria incorporating a microstructure tensor[J]. Computers and Geotechnics，2000，26(2)：105-112.
[18]	孙德安，姚仰平，殷宗泽. 初始应力各向异性土的弹塑性模型[J]. 岩土力学，2000，21(3)：222-226.(SUN Dean，YAO Yangping，YIN Zongze. An elasto-plastic model for soil with initially stress-induced anisotropy[J]. Rock and Soil Mechanics，2000，21(3)：222-226.(in Chinese))
[1]	ODA M，KOISHIKAWA I，HIGUCHI T. Experimental study of anisotropic shear strength of sand by plane strain test[J]. Soils and Foundations，1978，18(1)：25-38.
[3]	宋飞，张建民. 考虑侧向变形的各向异性砂土土压力试验研究[J]. 岩石力学与工程学报，2009，28(9)：1 884-1 895.(SONG Fei，ZHANG Jianmin. Experimental study of earth pressure for anisotropic sand considering lateral displacement[J]. Chinese Journal of Rock Mechanics and Engineering，2009，28(9)：1 884-1 895.(in Chinese))
[10]	李学丰，黄茂松，钱建固. 宏细观结合的砂土各向异性破坏准则[J]. 岩石力学与工程学报，2010，29(9)：1 885-1 892.(LI Xuefeng，HUANG Maosong，QIAN Jiangu. Failure criterion of anisotropic sand with method of macro-meso incorporation[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(9)：1 885-1 892.(in Chinese))
[12]	路德春，梁靖宇，王国盛，等. 横观各向同性土的三维强度准则[J]. 岩土工程学报，2018，40(1)：54-63.(LU Dechun，LIANG Jingyu，WANG Guosheng，et al. Three-dimensional strength criterion for transverse isotropic geomaterials[J]. Chinese Journal of Geotechnical Engineering，2018，40(1)：54-63.(in Chinese))
[13]	TOBITA Y. Fabric tensors in constitutive equations for granular materials[J]. Soils and Foundations，1989，29(4)：91-104.
[15]	董彤，孔亮，郑颖人，等. 考虑岩土材料各向异性与应力方向性的等效非线性模型[J]. 岩石力学与工程学报，2018，37(2)：506-512.(DONG Tong，KONG Liang，ZHENG Yingren，et al. Equivalent nonlinear model considering the anisotropy and the stress directionality of geomaterials[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(2)：506-512.(in Chinese))
[22]	LU D C，LIANG J Y，DU X L，et al. Fractional elastoplastic constitutive model for soils based on a novel 3D fractional plastic flow rule[J]. Computers and Geotechnics，2019，105：277-290.
[24]	SUN Y F，XIAO Y. Fractional order plasticity model for granular soils subjected to monotonic triaxial compression[J]. International Journal of Solids and Structures，2017，118-119：224-234.
[25]	梁靖宇，杜修力，路德春，等. 特征应力空间中土的分数阶临界状态模型[J]. 岩土工程学报，2019，41(3)：581-587.(LIANG Jingyu，DU Xiuli，LU Dechun，et al. Fractional order critical state model for soils in the characteristic stress space[J]. Chinese Journal of Geotechnical Engineering，2019，41(3)：581-587.(in Chinese))
[27]	MA C，LU D C，DU X L，et al. Developing a 3D elastoplastic constitutive model for soils：A new approach based on characteristic stress[J]. Computers and Geotechnics，2017，86：129-140.
[34]	STIPHO A S A Y. Experimental and theoretical investigation of the behaviour of anisotropically consolidated kaolin[Ph. D. Thesis][D]. Wales，The United Kingdom：Cardiff University，1978.
[2]	殷宗泽，张坤勇，朱俊高. 面板堆石坝应力变形计算中考虑土的各向异性[J]. 水利学报，2004，35(11)：22-26.(YIN Zongze，ZHANG Kunyong，ZHU Jungao. Computation for stress and deformation of concrete slab in rock-fill dam in consideration of soil anisotropy[J]. Journal of Hydraulic Engineering，2004，35(11)：22-26.(in Chinese))
[5]	陈天宇，冯夏庭，张希巍，等. 黑色页岩力学特性及各向异性特性试验研究[J]. 岩石力学与工程学报，2014，33(9)：1 772-1 779. (CHEN Tianyu，FENG Xiating，ZHANG Xiwei，et al. Experimental study on mechanical and anisotropic properties of black shale[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(9)：1 772-1 779.(in Chinese))
[9]	GAO Z W，ZHAO J D，YAO Y P. A generalized anisotropic failure criterion for geomaterials[J]. International Journal of Solids and Structures，2010，47(22/23)：3 166-3 185.
[11]	LU D C，LIANG J Y，DU X L，et al. A novel transversely isotropic strength criterion for soils based on a mobilised plane approach[J]. Géotechnique，2019，69(3)：234-250.
[19]	WHEELER S J，NÄÄTÄNEN A，KARSTUNEN M，et al. An anisotropic elastoplastic model for soft clays[J]. Canadian Geotechnical Journal，2003，40(2)：403-418.
[21]	黄茂松，柳艳华. 天然软黏土屈服特性及主应力轴旋转效应的本构模拟[J]. 岩土工程学报，2011，33(11)：1 667-1 675.(HUANG Maosong，LIU Yanhua. Simulation of yield characteristics and principal stress rotation effects of natural soft clay[J]. Chinese Journal of Geotechnical Engineering，2011，33(11)：1 667-1 675.(in Chinese))
[23]	SUMELKA W. Application of fractional continuum mechanics to rate independent plasticity[J]. Acta Mechanica，2014，225(11)：3 247-3 264.
[26]	LU D C，MA C，DU X L，et al. Development of a new nonlinear unified strength theory for geomaterials based on the characteristic stress concept[J]. International Journal of Geomechanics，2017，17(2)：4016058.
[29]	DAFALIAS Y F. An anisotropic critical state soil plasticity model[J]. Mechanics Research Communications，1986，13(6)：341-347.
[31]	KIRKGARD M M， LADE P V. Anisotropic three-dimensional behavior of a normally consolidated clay[J]. Canadian Geotechnical Journal，1993，30(4)：848-858.
[4]	童朝霞，周少鹏，姚仰平，等. 测定各向异性砂土抗剪强度特性的新型直剪装置及初步应用[J]. 岩石力学与工程学报，2012，31(12)：2 579-2 584.(TONG Zhaoxia，ZHOU Shaopeng，YAO Yangping，et al. An improved direct shear apparatus for shear strength of anisotropic sands and its primary application[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(12)：2 579-2 584.(in Chinese))
[8]	LI X S，DAFALIAS Y F. Constitutive modeling of inherently anisotropic sand behavior[J]. Journal of Geotechnical and Geoenvironmental Engineering，2002，128(10)：868-880.
[20]	但汉波，王立忠. 基于弹黏塑性本构模型的旋转硬化规律[J]. 岩石力学与工程学报，2010，29(1)：184-192.(DAN Hanbo，WANG Lizhong. Rotational hardening law based on elastoviscoplastic constitutive model[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(1)：184-192.(in Chinese))
[32]	YU H S. CASM：A unified state parameter model for clay and sand[J]. International Journal for Numerical and Analytical Methods in Geomechanics，1998，22(8)：621-653.
[16]	YAO Y P，TIAN Y，GAO Z W. Anisotropic UH model for soils based on a simple transformed stress method[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2017，41(1)：54-78.
[30]	ABELEV A V，LADE P V. Characterization of failure in cross- anisotropic soils[J]. Journal of Engineering Mechanics，2004，130(5)：599-606.
[28]	LU D C，LI X Q，DU X L，et al. A simple 3D elastoplastic constitutive model for soils based on the characteristic stress[J]. Computers and Geotechnics，2019，109：229-247.