岩石梯度应力加载试验装置研制及初步试验研究

doi:10.13722/j.cnki.jrme.2019.1206

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (700 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The surrounding rock is subjected to linear or nonlinear gradient geo-stress. However, there is no ideal loading test method and device for applying gradient stress on rock，which has severely restricted the investigation of mechanical properties of rock under gradient stresses. Based on the distribution regularities of the tangential and radial stresses around underground circular opening，a new test device was developed to simulate the gradient static stress environment on a long rock specimen. The loading device system consists of a base platform and horizontal close load-bearing bracket，an axial loading device，a transverse loading device，and some auxiliary parts and tools. The key test techniques for determining the normal forces on upper and lower lateral sides of specimens，the thickness of the rubber blanket，the static friction coefficient between red sandstone/stainless steel and rubber blanket were studied. The long specimens were prepared with stainless steel and red sandstone. The gradient stress loading tests of stainless steel and red sandstone specimens were carried out to verify the feasibility of the proposed test method and device system. The results show that the test method and device system can ideally simulate linear and nonlinear gradient static stress on a long specimen，and that the test device system is easy to operate and can realize various static stress gradient modes. When the uniform bolt tightening torque is applied on red sandstone specimens，the cross-section of specimens will have linear gradient static stress and nonlinear gradient static strain. With increasing the bolt tightening torque，the curvature of the gradient strain curve becomes smaller and smaller. When the non-uniform bolt tightening torque is applied on red sandstone specimens，both the stress and the strain on the cross-section of red sandstone specimens are nonlinear. As the non-uniform gradient of the bolt tightening torque increases，the non-linear gradient of the axial compressive strain becomes larger.

Key words： rock mechanics gradient static stress test method test device deformation characteristic

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIN Jiefang1
	ZHANG Rui1
	WANG Xibo1
	WU Yue2
	YU Xiong1
	ZHONG Yilu1

Cite this article:

JIN Jiefang1,ZHANG Rui1,WANG Xibo1, et al. Development of a rock gradient stress loading test device and its primary application[J]. , 2020, 39(8): 1547-1559.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2019.1206 OR http://rockmech.whrsm.ac.cn/EN/Y2020/V39/I8/1547

[20]	吕佳欣，肖毅. 复合材料螺栓连接预紧力松弛的改进预测模型[J]. 工程力学，2018，35(10)：229-237.(LV Jiaxin，XIAO Yi. Improved approach to modelling preload relaxation in bolted composite jointes[J]. Engineering Mechanics，2018，35(10)：229-237.(in Chinese))
[19]	成大先. 机械设计手册[M]. 北京：化学工业出版社，2004：70-71.(CHENG Daxian. Mechanical design manual[M]. Beijing：Chemical Industry Press，2004：70-71.(in Chinese))
[1]	肖建清，冯夏庭，邱士利，等. 圆形隧道开挖卸荷效应的动静态解析方法及结果分析[J]. 岩石力学与工程学报，2013，32(12)：2 471-2 480.(XIAO Jianqing，FENG Xiating，QIU Shili，et al. Dynamic and static analytical method of excavation unloading effect in circular tunnel and results analysis[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(12)：2 471-2 480.(in Chinese))
[2]	夏才初，刘宇鹏，吴福宝，等. 基于西原模型的圆形隧道黏弹-黏塑性解析解[J]. 岩土力学，2019，40(5)：1 638-1 648.(XIA Caichu，LIU Yupeng，WU Fubao，at el. Viscoelasto-viscoplastic solutions for circular tunnel based on Nishihara model[J]. Rock and Soil Mechanics，2019，40(5)：1 638-1 648.(in Chinese))
[15]	BRADY B H G，BROWN E T. Rock mechanics for underground mining[M]. 3rd ed. Dordrecht：Springer，2005：173-178.
[3]	BOBET A. Characteristic curves for deep circular tunnels in poroplastic rock[J]. Rock mechanics and Rock Engineering，2010，43(2)：185-200.
[5]	金解放，李夕兵，殷志强，等. 循环冲击下波阻抗定义岩石损伤变量的研究[J]. 岩土力学，2011，32(5)：1 385-1 393.(JIN Jiefang，LI Xibing，YIN Zhiqiang，et al. A method for defining rock damage variable by wave impedance under cyclic impact loadings[J]. Rock and Soil Mechanics，2011，32(5)：1 385-1 393.(in Chinese))
[8]	GONG F Q，YAN J Y，LUO S，et al. Investigation on the linear energy storage and dissipation laws of rock materials under uniaxial compression[J]. Rock mechanics and Rock Engineering，2019，52(11)：4 237-4 256.
[10]	袁伟，常军然，金解放，等. 轴向静载对变截面杆中应力波幅值的影响[J]. 振动与冲击，2019，38(17)：51-57.(YUAN Wei，CHANG Junran，JIN Jiefang，at el. Effects of axial static loads on stress wave amplitude in at apered aluminum rod[J]. Journal of Vibration and Shock，2019，38(17)：51-57.(in Chinese))
[4]	ZHANG Q Y，ZHANG X T，WANG Z C，et al. Failure mechanism and numerical simulation of zonal disintegration around a deep tunnel under high stress[J]. International Journal of Rock Mechanics and Mining Sciences，2017，93：344-355.
[6]	ZHAO Y L，ZHANG L Y，WANG W J，et al. Cracking and stress-strain behavior of rock-like material containing two flaws under uniaxial compression[J]. Rock mechanics and Rock Engineering，2016，49(7)：2 665-2 687.
[7]	ZHU Q Q，LI D Y，HAN Z Y，et al. Mechanical properties and fracture evolution of sandstone specimens containing different inclusions under uniaxial compression[J]. International Journal of Rock Mechanics and Mining Sciences，2019，115：33-47.
[9]	YIN H W，YANG C H，MA H L，et al. Study on damage and repair mechanical characteristics of rock salt under uniaxial compression[J]. Rock mechanics and Rock Engineering，2019，52(3)：659-671.
[12]	何满潮，苗金丽，李德建，等. 深部花岗岩试样岩爆过程实验研究[J]. 岩石力学与工程学报，2007，26(5)：865-876.(HE Manchao，MIAO Jinli，LI Dejian，et al. Experimental study on rock burst processes of granite specimen at great depth[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(5)：865-876.(in Chinese))
[14]	SU G，ZHAI S，JIANG J，et al. Influence of radial stress gradient on strainbursts：an experimental study[J]. Rock Mechanics and Rock Engineering，2017，50(10)：2 659-2 676.
[16]	王志宇，王清远，刘晓凯，等. 基于屈服线理论的螺栓端板连接方钢管柱承载力计算模型研究[J]. 建筑结构学报，2016，37(6)：160-173.(WANG Zhiyu，WANG Qingyuan，LIU Xiaokai，at el. Yield line theory based loading capacity analytical model of bolted endplate connections to square hollow section columns[J]. Journal of Building Structures，2016，37(6)：160-173.(in Chinese))
[17]	李会勋，胡迎春，张建中. 利用ANSYS模拟螺栓预紧力的研究[J]. 山东科技大学学报：自然科学版，2006，25(1)：57-59.(LI Huixun，HU Yingchun，ZHANG Jianzhong，at el. Study on simulating bolt pretension by using ANSYS[J]. Journal of Shandong University of Science and Technology：Natural Science，2006，25(1)：57-59.(in Chinese))
[22]	BENABDALLAH H S. Static friction coefficient of some plastics against steel and aluminum under different contact conditions[J]. Tribology International，2007，40(1)：64-73.
[24]	RAMEZANI M，RIPIN Z M，AHMAD R. A static friction model for tube bulge forming using a solid bulging medium[J]. International Journal of Advanced Manufacturing Technology，2009，43：238-247.
[11]	金解放，常军然，袁伟，等. 一种实现轴向近似梯度静应力的加载实验方法及装置：中国，CN201610073926.2[P]. 2018.02.18.(JIN Jiefang，CHANG Junran，YUAN Wei，at el. Loading experiment method and device for realizing axial approximate gradient static stress：China，CN201610073926.2[P]. 2018.02.18.(in Chinese))
[13]	祝文化，马能，夏元友，等. 气液复合加载的岩爆模型试验研究[J]. 岩石力学与工程学报，2017，36(1)：159-166.(ZHU Wenhua，MA Neng，XIA Yuanyou，et al. Model tests on rock burst using gas-liquid composite loading[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(1)：159-166.(in Chinese))
[18]	黄含军，王军评，毛勇建，等. 爆炸螺栓预紧力对冲击响应影响分析[J]. 振动与冲击，2015，34(16)：166-169.(HUANG Hanjun，WANG Junping，MAO Yongjian，at el. Influence of pretightening force of explosive bolts on impulse response[J]. Journal of Vibration and Shock，2015，34(16)：166-169.(in Chinese))
[21]	MATUSZAK A . Factors influencing friction in steel sheet forming[J]. Journal of Materials Processing Technology，2000，106(1)：250-253.
[23]	吕仁国，李同生，刘旭军. 橡胶摩擦磨损特性的研究进展[J]. 高分子材料科学与工程，2002，18(5)：12-15.(LV Renguo，LI Tongsheng，LIU Xujun. Advances in study on friction-wave of rubbers[J]. Polymeric Materials Science and engineering，2002，18(5)：12-15.(in Chinese))