切顶卸压沿空留巷围岩结构特征及锚索强化支护技术

doi:10.13722/j.cnki.jrme.2021.0027

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (4716 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to solve the serious deformation and difficult support problems for the gob-side entry retaining in the working face front section，taking the transport entry in LW2901 working face of Juji coal mine as the field project，the surrounding rock stability control of the gob-side entry retaining in the front section of the working face by anchor-cable strengthened technology was investigated through theoretical analysis，numerical simulation and field measurement. By establishing the mechanical structure models for the gob-side entry retaining roof with the consideration of roof cutting or not，the equations of the support strength and the subsidence of the roof were derived. The results show that，compared to the roof without cutting，the subsidence and the support strength of the cutting roof reduce 46.4% and 40.4% respectively，which proves that gob-side entry retaining is an effective entry surrounding rock control way. The surrounding rock damage characteristics under different strengthened support schemes were simulated by the software of FLAC3D，and the reasonable design scheme was determined as “4– 3–3–3–4”cyclic arrangement of reinforcing anchor cables along the direction of the entry. With increasing the number of the strengthened anchors，the stress and deformation of the surrounding rock gradually decrease and the decrease rate shows a decreasing trend. The in-site monitoring results show that the maximum values of the roof subsidence，the floor heaving and the coal wall deformation are 451 mm，550 mm and 507 mm，respectively. The successful practice of the anchor-cable strengthened support technology of the gob-side entry retaining with roof cutting and pressure releasing in the front section of the working face provides a useful reference for the surrounding rock control under similar conditions.

Key words： mining engineering gob-side entry retaining roof cutting and pressure releasing anchor-cable support parameter optimization surrounding rock control

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Fangtian1
	2
	SHANG Junjian1
	2
	ZHAO Bin3
	CAO Qinghua4

Cite this article:

WANG Fangtian1,2,SHANG Junjian1, et al. Surrounding rock structural characteristics and anchor-cable strengthened support technology of the gob-side entry retaining with roof cutting and pressure releasing[J]. , 2021, 40(11): 2296-2305.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2021.0027 OR https://rockmech.whrsm.ac.cn/EN/Y2021/V40/I11/2296

[1]	苏超，弓培林，康红普，等. 深井临空高应力巷道切顶卸压机制研究[J]. 采矿与安全工程学报，2020，37(6)：1 104-1 113.(SU Chao，GONG Peilin，KANG Hongpu，et al. Mechanism of roof cutting and pressure relief in gob-side and high-stress roadway in deep coal mine[J]. Journal of Mining and Safety Engineering，2020，37(6)：1 104-1 113. (in Chinese))
[2]	左建平，孙运江，文金浩，等. 岩层移动理论与力学模型及其展望[J]. 煤炭科学技术，2018，46(1)：1-11.(ZUO Jianping，SUN Yunjiang，WEN Jinhao，et al. Theoretical and mechanical models of rock strata movement and their prospects[J]. Coal Science and Technology，2018，46(1)：1-11.(in Chinese))
[3]	耿继业，王方田，张洋，等. 高应力煤巷围岩控制关键技术研究[J]. 煤炭科学技术，2019，47(9)：189-196.(GENG Jiye，WANG Fangtian，ZHANG Yang，et al. Research on key control technology of surrounding rock in high stress roadway[J]. Coal Science and Technology，2019，47(9)：189-196.(in Chinese))
[4]	尹希文. 我国大采高综采技术及围岩控制研究现状[J]. 煤炭科学技术，2019，47(8)：37-45.(YIN Xiwen. Research status of strata control and large mining height fully-mechanized mining technology in China[J]. Coal Science and Technology，2019，47(8)：37-45.(in Chinese))
[5]	何满潮，陈上元，郭志飚，等. 切顶卸压沿空留巷围岩结构控制及其工程应用[J]. 中国矿业大学学报，2017，46(5)：959-969.(HE Manchao，CHEN Shangyuan，GUO Zhibiao，et al. Control of surrounding rock structure for gob-side entry retaining by cutting roof to release pressure and its engineering application[J]. Journal of China University of Mining and Technology，2017，46(5)：959-969.(in Chinese))
[6]	康红普. 我国煤矿巷道围岩控制技术发展70年及展望[J]. 岩石力学与工程学报，2021，40(1)：1-30.(KANG Hongpu. Seventy years development and prospects of strata control technologies for coal mine roadways in China[J]. Chinese Journal of Rock Mechanics and Engineering，2021，40(1)：1-30.(in Chinese))
[7]	康红普，范明建，高富强，等. 超千米深井巷道围岩变形特征与支护技术[J]. 岩石力学与工程学报，2015，34(11)：2 227-2 241. (KANG Hongpu，FAN Mingjian，GAO Fuqiang，et al. Deformation and support of rock roadway at depth more than 1000 meters[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(11)：2 227-2 241.(in Chinese))
[8]	何满潮，王亚军，杨军，等. 切顶成巷工作面矿压分区特征及其影响因素分析[J]. 中国矿业大学学报，2018，47(6)：1 157-1 165. (HE Manchao，WANG Yajun，YANG Jun，et al. Zonal characteristics and its influence factors of working face pressure using roof cutting and pressure-relief mining method with no pillar and roadway formed automaticil[J]. Journal of China University of Mining and Technology，2018，47(6)：1 157-1 165.(in Chinese))
[9]	王炯，高韧，于光远，等. 切顶卸压自成巷覆岩运动红外辐射特征试验研究[J]. 煤炭学报，2020，45(增1)：119-127.(WANG Jiong，GAO Ren，YU Guangyuan，et al. Experimental study on infrared radiation characteristics of overburden movement of self-forming roadway under pressure relief[J]. Journal of China Coal Society，2020，45(Supp.1)：119-127.(in Chinese))
[10]	朱珍，袁红平，张科学，等. 切顶卸压无煤柱自成巷顶板下沉分析及控制技术[J]. 煤炭科学技术，2018，46(11)：1-7.(ZHU Zhen，YUAN Hongping，ZHANG Kexue，et al. Analysis and control technology of roof subsidence in non-pillar gob-side entryretaining formed by roof cutting and pressure release[J]. Coal Science and Technology，2018，46(11)：1-7.(in Chinese))
[11]	谭云亮，于凤海，宁建国，等. 沿空巷旁支护适应性原理与支护方法[J]. 煤炭学报，2016，41(2)：376-382.(TAN Yunliang，YU Fenghai，NING Jianguo，et al. Adaptability theory of roadside support in gob-side entry retaining and its supporting design[J]. Journal of China Coal Society，2016，41(2)：376-382.(in Chinese))
[12]	WU J K，ZHOU W B，TAO H，et al. Research on failure characteristics and zoning control technology of thick-soft surrounding rock for deep gob-side entry retaining[J]. Shock and Vibration，2020，6613514：1-14.
[13]	WU J K，DONG Y，CHEN J R，et al. Short cantilever rock beam structure and mechanism of gob-side entry retaining roof in reuse period[J]. Shock and Vibration，2020，8835820：1-14.
[14]	冯维民，宋娟，赵俊峰. 材料力学[M]. 2版. 北京：国防工业出版社，2010：94-95.(FENG Weimin，SONG Juan，ZHAO Junfeng. Mechanics of materials[M]. 2nd ed. Beijing：National Defense Industry Press，2010：94-95.(in Chinese))
[15]	韩昌良，张农，李桂臣，等. 覆岩分次垮落时留巷顶板离层形成机制[J]. 中国矿业大学学报，2012，41(6)：893-899.(HAN Changliang，ZHANG Nong，LI Guichen，et al. Bed separation mechanism under sequential roof collapse condition in a gob-side entry retaining[J]. Journal of China University of Mining and Technology，2012，41(6)：893-899.(in Chinese))
[16]	钱鸣高，石平五，许家林. 矿山压力与岩层控制[M]. 2版. 徐州：中国矿业大学出版社，2010：79.(QIAN Minggao，SHI Pingwu，XU Jialin. Mine pressure and rock formation control[M]. 2nd ed. Xuzhou：China University of Mining and Technology Press，2010：79.(in Chinese))
[17]	袁超峰，袁永，朱成，等. 薄直接顶大采高综采工作面切顶留巷合理参数研究[J]. 煤炭学报，2019，44(7)：1 981-1 990.(YUAN Chaofeng，YUAN Yong，ZHU Cheng，et al. Reasonable parameters of roof cutting entry retaining in thin immediate roof and large mining height fully-mechanized face[J]. Journal of China Coal Society，2019，44(7)：1 981-1 990.(in Chinese))