剪切速率对平直节理摩擦行为的影响及其机制研究

doi:10.13722/j.cnki.jrme. 2021.0225

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1703 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Understanding the friction behavior of planar rock joints is the basis for exploring the shear mechanical properties of undulating joints and rough joints. It is also of great significance for preventing caverns from instability and slope landslides. To explore the relationship between the friction behavior and the shear rate，firstly，artificial rock joints are subjected to direct shear tests at 5 shear rates；and then，variations in shear strength，friction coefficient，shear stiffness and joint surface abrasion with shear rate are analyzed. Finally，combined with the particle discrete element method，the effect mechanism of shear rate on friction coefficient is analyzed from the perspective of contact shift. Tested results show that with the increase of shear rate，shear strength and stiffness show a decreasing trend，and the decreasing amplitude gradually weakens. Under different normal pressures，similar increasing trends of shear strength and stiffness can be observed. The friction coefficient of a joint surface and the logarithm of shear rate are negatively correlated，and the corresponding empirical model is obtained by regression. The scratch depth of a joint surface tends to decrease with the increase of shear rate. The abrasion area may be less affected by shear rate. Simulated results show that the increased shear rates shift the position of center points of the joint contacts. Therefore，the contact overlap of particles decreases，resulting in a decrease in the contact shear force. The macroscopic manifestation is a decrease in the shear strength and the friction coefficient. The increase of shear rate leads to a decrease of abrasion depth of asperities on the joint surface，which is an important effect mechanism of shear rate on the friction behavior of joints.

Key words： rock mechanics planar joint shear rate shear strength friction coefficient joint contact

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	YUAN Wei1
	LI Jianchun1
	2

Cite this article:

YUAN Wei1,LI Jianchun1,2. Study on the effects and its mechanism of shear rate on friction of planar joints[J]. , 2021, 40(S2): 3241-3252.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme. 2021.0225 OR https://rockmech.whrsm.ac.cn/EN/Y2021/V40/IS2/3241

[1]	KANG J，ZHU J，ZHAO J. A review of mechanisms of induced earthquakes：from a view of rock mechanics[J]. Geomechanics and Geophysics for Geo-Energy and Geo-Resources，2019，5(2)：171-196.
[2]	沈明荣，张清照. 规则齿型结构面剪切特性的模型试验研究[J]. 岩石力学与工程学报，2010，29(4)：713-719.(SHEN Mingrong，ZHANG Qingzhao. Experimental study of shear deformation characteristics of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(4)：713-719.(in Chinese))
[3]	赵坚. 岩石节理剪切强度的JRC-JMC新模型[J]. 岩石力学与工程学报，1998，17(4)：1-9.(ZHAO Jian. A new JRC-JMC shear strength criterion for rock joint[J]. Chinese Journal of Rock Mechanics and Engineering，1998，17(4)：1-9.(in Chinese))
[4]	夏才初，孙宗颀. 工程岩体节理力学[M]. 上海：同济大学出版社，2002：4-5.(XIA Caichu，SUN Zongqi. Mechanics of engineering jointed rock mass[M]. Shanghai：Tongji University Press，2002：4-5.(in Chinese))
[5]	朱小明，李海波，刘博，等. 含一阶和二阶起伏体节理剪切强度的试验研究[J]. 岩石力学与工程学报，2011，30(9)：1 810-1 818. (ZHU Xiaoming，LI Haibo，LIU Bo，et al. Experimental study of shear strength of joints with first-order and second-order asperities[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(9)：1 810-1 818.(in Chinese))
[6]	LI Y，WU W，LI B. An analytical model for two-order asperity degradation of rock joints under constant normal stiffness conditions [J]. Rock Mechanics and Rock Engineering，2018，51(5)：1 431-1 445.
[7]	DIETERICH J H. Time-dependent friction in rocks[J]. Journal of Geophysical Research，1972，77(20)：3 690-3 697.
[8]	DIETERICH J H. Time-dependent friction and mechanics of stick-slip[J]. Pure and Applied Geophysics，1978，116(4/5)：790-806.
[9]	CRAWFORD A M，CURRAN J H. The influence of shear velocity on the frictional resistance of rock discontinuities[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1981，18(6)：505-515.
[10]	BARBERO M，BARLA G，ZANINETTI A. Dynamic shear strength of rock joints subjected to impulse loading[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1996，33(2)：141-151.
[11]	ATAPOUR H，MOOSAVI M. The influence of shearing velocity on shear behavior of artificial joints[J]. Rock Mechanics and Rock Engineering，2013，47(5)：1 745-1 761.
[12]	LI H H. Mechanical responses of rock joints with regular asperities under various shear rates investigated by double shear test[J]. Journal of Testing and Evaluation，2017，45(2)：470-483.
[13]	刘婷婷，李建春，李海波，等. 剪切速率对平直充填节理的剪切力学特性影响研究[J]. 岩土力学，2017，38(7)：1 967-1 973.(LIU Tingting，LI Jiangchun，LI Haibo，et al. Influence of shearing velocity on shear mechanical properties of planar filled joints[J]. Rock and Soil Mechanics，2017，38(7)：1 967-1 973.(in Chinese))
[14]	李海波，冯海鹏，刘博. 不同剪切速率下岩石节理的强度特性研究[J]. 岩石力学与工程学报，2006，25(12)：2 435-2 440.(LI Haibo，FENG Haipeng，LIU Bo. Study on strength behaviors of rock joints under different shearing deformation velocities[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(12)：2 435-2 440.(in Chinese))
[15]	ZHOU H，MENG F，ZHANG C，et al. Investigation of the acoustic emission characteristics of artificial saw-tooth joints under shearing condition[J]. Acta Geotechnica，2016，11(4)：925-939.
[16]	王刚，张学朋，蒋宇静，等. 一种考虑剪切速率的粗糙结构面剪切强度准则[J]. 岩土工程学报，2015，37(8)：1 399-1 404.(WANG Gang，ZHANG Xuepeng，JIANG Yujing，et al. New shear strength criterion for rough rock joints considering shear velocity[J]. Chinese Journal of Geotechnical Engineering，2015，37(8)：1 399-1 404.(in Chinese))
[17]	MENG F，WONG L N Y，ZHOU H，et al. Shear rate effects on the post-peak shear behaviour and acoustic emission characteristics of artificially split granite joints[J]. Rock Mechanics and Rock Engineering，2019，52(7)：2 155-2 174.
[18]	TANG Z，WONG L. Influences of normal loading rate and shear velocity on the shear behavior of artificial rock joints[J]. Rock Mechanics and Rock Engineering，2015，49(6)：2 165-2 172.
[19]	DANG W，KONIETZKY H，CHANG L，et al. Velocity-frequency-amplitude-dependent frictional resistance of planar joints under dynamic normal load(DNL) conditions[J]. Tunnelling and Underground Space Technology，2018，79：27-34.
[20]	郑博文，祁生文，詹志发，等. 剪切速率对岩石节理强度特性的影响[J]. 地球科学与环境学报，2015，37(5)：101-110.(ZHENG Bowen，QI Shengwen，ZHAN Zhifa，et al. Effect of shear rate on the strength characteristics of rock joints[J]. Journal of Earth Sciences and Environment，2015，37(5)：101-110.(in Chinese))
[21]	MURALHA J，GRASSELLI G，TATONE B，et al. ISRM suggested method for laboratory determination of the shear strength of rock joints：revised version[J]. Rock Mechanics and Rock Engineering，2013 47(Supp.1)：291-302.
[22]	JAEGER J C，COOK N G W，ZIMMERMAN R. Fundamentals of rock mechanics[M]. [S. l.]：John Wiley and Sons，2009：65-67.
[23]	PÉREZ-REY I，BASTANTE F G，ALEJANO L R，et al. Influence of microroughness on the frictional behavior and wear response of planar saw-cut rock surfaces[J]. International Journal of Geomechanics，2020，20(8)：04020118.
[24]	BARTON N，CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock Mechanics，1977，(10)：1-54.
[25]	ZHAO J. Joint surface matching and shear strength part A-joint matching coefficient(JMC)[J]. International Journal of Rock Mechanics and Mining Sciences，1997，34(2)：173-178.
[26]	ZHAO J. Joint surface matching and shear strength part B-JRC-JMC shear strength criterion[J]. International Journal of Rock Mechanics and Mining Sciences，1997，34(2)：179-185.
[27]	李晓锋，李海波，夏祥，等. 类节理岩石直剪试验力学特性的数值模拟研究[J]. 岩土力学，2016，37(2)：583-591.(LI Xiaofeng，LI Haibo，XIA Xiang，et al. Numerical simulation of mechanical characteristics of jointed rock in direct shear test[J]. Rock and Soil Mechanics，2016，37(2)：583-591.(in Chinese))
[28]	Itasca Consulting Group Inc.. PFC(particle flow code)[R]. [S. l.]：[s. n.]，2014.
[29]	BAHAADDINI M，SHARROCK G，HEBBLEWHITE B K. Numerical direct shear tests to model the shear behaviour of rock joints[J]. Computers and Geotechnics，2013，51：101-115.