螺纹钢锚杆楔形端部搅拌树脂锚固剂运移特征及锚固实验

doi:10.13722/j.cnki.jrme.2021.0544

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (30805 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract During anchorage construction，stirring the resin in the borehole is a hidden work，so it is not easy to master the distribution of the resin after stirring. In this paper，through the combination of theoretical analysis，numerical simulation and laboratory experiments，the influence of the wedge-shaped end of rebar bolts on the stirring effect of the resin is analyzed. The theoretical analysis shows that the cutting angle of the wedge-shaped stirring end has a great influence on the force acting on the resin and the stirring effect. The wedge-shaped stirring end of the bolts will make the top of the bag of the resin concave and increase the rotation force of the resin when the bolts rotate，which will help to destroy the bag of the resin and to improve the fluidity of the resin. Numerical simulation shows that，in the case of a double wedge angle of 75°，ribs at the top of the “straight” type bolts and the offset C = 0，the stirring effect of the resin above the wedge-shaped stirring end of the bolts is more uniform，the flow velocity is larger and the diffusion range in the borehole is wider. At the same time，it is helpful to improve the stirring efficiency of the resin by adding a groove at the “straight” tip of the wedge-shaped stirring end of the bolts. According to the anchoring performance test of the bolts，it is found that after the stirring end of the bolts is added grooves，the average value of the peak pull-out force is increased by about 15% and by about 36% compared with the average peak pull-out force of the common bolts. The research results have certain theoretical and engineering application values for improving the anchoring quality and performance of bolts.

Key words： geotechnical engineering rebar bolts wedge-shaped end of bolts resin flow characteristics optimization of bolts end shape

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Shaowei1
	2
	CUI Lei1
	MA Nianjie3
	JIANG Yanjun4
	LI Yongen5
	ZHANG Ying6
	LU Yunhai7

Cite this article:

LIU Shaowei1,2,CUI Lei1, et al. Flow characteristics of stirring resin at wedge end of bolts and anchorage test[J]. , 2022, 41(1): 40-52.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2021.0544 OR http://rockmech.whrsm.ac.cn/EN/Y2022/V41/I1/40

[8]	王明恕. 全长锚固锚杆机理的探讨[J]. 煤炭学报，1988，8(1)：40-47.(WANG Mingshu．Mechanism of full-column rock bolt[J]. Journal of China Coal Society，1988，8(1)：40-47.(in Chinese))
[18]	ALTOUNYAN P，BUGDEN A，O'CONNOR D，et al. Developments in improving the standard of installation and bond strength of full column resin roof bolts[C]// Proceedings of the 22nd International Conference on Ground Control in Mining. Morgantown：[s. n.]，2003：263-269.
[21]	贾后省，王璐瑶，刘少伟，等. 巷道含水软岩顶板锚索树脂锚固增效方法[J]. 岩石力学与工程学报，2019，38(5)：938-947.(JIA Housheng，WANG Luyao，LIU Shaowei，et al. A method for improving the anchorage effect of the resin anchored cable bolts in roadway roof with water bearing soft rock[J]. Chinese Journal of Rock Mechanics and Engineering，2019，38(5)：938-947.(in Chinese))
[23]	康红普，崔千里，胡滨，等．树脂锚杆锚固性能及影响因素分析[J]. 煤炭学报，2014，39(1)：1-10.(KANG Hongpu，CUI Qianli，HU Bin，et al．Analysis of anchorage properties and affecting factors of resin bolts[J]．Journal of China Coal Society，2014，39(1)：1-10.(in Chinese))
[25]	FU M X，LIU S W，JIA H S，et al. Experimental study of an orientation and resin-lifting device for improving the performance of resin-anchored roof bolts[J]. Rock Mechanics and Rock Engineering，2020，53(1)：211-231.
[27]	刘少伟，王伟，付孟雄，等. 螺纹钢锚杆搅拌锚固剂力学特征分析与端部形态优化实验[J]. 中国矿业大学学报，2020，49(3)：419-427.(LIU Shaowei，WANG Wei，FU Mengxiong，et al. Mechanical characteristics analysis and end type optimization experiment of rebar bolts during resin mixing process[J]. Journal of China University of Mining and Technology，2020，49(3)：419-427.(in Chinese))
[28]	赵象卓，张宏伟，CAO Chen，等. 不同围岩条件下锚杆肋间距与锚固力优化研究[J]. 岩土力学，2018，39(4)：1 263-1 270.(ZHAO Xiangzhuo，ZHANG Hongwei，CAO Chen，et al. Study on optimization of anchor rib spacing and anchoring force under different surrounding rock conditions[J]. Rock and Soil Mechanics，2018，39(4)：1 263-1 270.(in Chinese))
[4]	谢和平，高峰，鞠杨，等. 深部开采的定量界定与分析[J]. 煤炭学报，2015，40(1)：1-10.(XIE Heping，GAO Feng，JU Yang，et al. Quantitative definition and investigation of deep mining[J]. Journal of China Coal Society，2015，40(1)：1-10.(in Chinese))
[6]	靖洪文，尹乾，朱栋，等. 深部巷道围岩锚固结构失稳破坏全过程试验研究[J]. 煤炭学报，2020，45(3)：889-901.(JING Hongwen，YIN Qian，ZHU Dong，et al. Experimental study on the whole process of instability and failure of anchorage structure in surrounding rock of deep-buried roadway[J]. Journal of China Coal Society，2020，45(3)：889-901.(in Chinese))
[14]	张明，CAO Chen，张怀东，等. 树脂锚固剂中添加不同钢质骨料对锚固力的影响[J]. 煤炭学报，2019，44(6)：1 690-1 697. (ZHANG Ming，CHEN Cao，ZHANG Huaidong，et al. Effect of anchoring force by adding steel aggregate in resin anchoring agent[J]. Journal of China Coal Society，2019，44(6)：1 690-1 697.(in Chinese))
[24]	胡滨，康红普，林健，等．温度对树脂锚杆锚固性能影响研究[J]. 采矿与安全工程学报，2012，29(5)：644-649.(HU Bin，KANG Hongpu，LIN Jian，et al．Study on influence of temperature on anchorage performance of resin anchored bolt[J]．Journal of Mining and Safety Engineering，2012，29(5)：644-649.(in Chinese))
[2]	侯朝炯，郭励生，勾攀峰. 煤巷锚杆支护[M]. 徐州：中国矿业大学出版社，1999：1-38.(HOU Chaojiong，GUO Lisheng，GOU Panfeng. Rock bolting for coal roadway[M]. Xuzhou：China University of Mining and Technology Press，1999：1-38.(in Chinese))
[12]	CAO C，REN T，ZHANG Y，et al. Experimental investigation of the effect of grout with additive in improving ground support[J]. International Journal of Rock Mechanics and Mining Sciences，2016，85：52-59.
[16]	ZINGANO A，KOPPE J，COSTA J F，et al. In-situ tests and numerical simulation about the effect of annulus thickness on the resin mixture for fully grouted resin bolt[C]// Proceedings of 27th International Conference on Ground Control in Mining. Morgantown：[s. n.]，2008：284-290.
[26]	LIU S W，HE D Y，FU M X. Experimental investigation of surrounding-rock anchoring synergistic component for bolt support in tunnels[J]. Tunneling and Underground Space Technology，2020，104：103531.
[19]	刘少伟，贺德印，付孟雄，等. 树脂锚固剂搅拌过程仿真及高效搅拌构件优化实验[J]. 煤炭学报，2020，45(9)：3 073-3 086.(LIU Shaowei，HE Deyin，FU Mengxiong，et al. Numerical simulation of mixing process of resin grout and optimization experiment of high-efficiency mixing component[J]. Journal of China Coal Society，2020，45(9)：3 073-3 086.(in Chinese))
[22]	JIA H S，WANG Y W，LIU S W，et al. Experimental study of stirring and resin-blocking devices for improving the performance of resin-anchored cable bolts[J]. Rock Mechanics and Rock Engineering，https：//doi.org/10.1007/s 00603-021-02470-7. [2021‐05‐24]
[29]	章梓雄，董曾南. 黏性流体力学[M]. 北京：清华大学出版社，2011：52-70.(ZHANG Zixiong，DONG Zengnan. Viscous fluid mechanics[M]. Beijing：Tsinghua University Press，2011：52-70.(in Chinese))
[7]	贺曼罗. 环氧树脂胶黏剂[M]. 北京：中国石化出版社，2004：38-50.(HE Manluo. Epoxy resin adhesive[M]. Beijing：China Petrochemical Press，2004：38-50.(in Chinese))
[1]	康红普，王金华. 煤巷锚杆支护理论与成套技术[M]. 北京：煤炭工业出版社，2007：23-58.(KANG Hongpu，WANG Jinhua. Rock bolting theory and complete technology for coal roadways[M]. Beijing：China Coal Industry Publishing House，2007：23-58.(in Chinese))
[11]	CAO C，REN T，COOK C. Calculation of the effect of Poisson's ratio in laboratory push and pull testing of resin-encapsulated bolts[J]. International Journal of Rock Mechanics and Mining Sciences，2013，64：175-180.
[20]	LIU S W，FU M X，JIA H S，et al. Shear characteristics of cuneiform reaming anchorage bolts in coal mine roadways[J]. Rock Mechanics and Rock Engineering，2019，52：1 931-1 943.
[3]	林健，杨景贺，韩国强，等. 不同杆体外形树脂锚杆锚固与安设性能对比试验研究[J]. 煤炭学报，2015，40(2)：286-292.(LIN Jian，YANG Jinghe，HAN Guoqiang，et al. Comparable test on anchoring and setting performance of resin bolts with different rod shapes[J]. Journal of China Coal Society，2015，40(2)：286-292.(in Chinese))
[5]	柏建彪，侯朝炯，杜木民，等. 复合顶板极软煤层巷道锚杆支护技术研究[J]. 岩石力学与工程学报，2001，20(1)：53-56.(BAI Jianbiao，HOU Chaojiong，DU Mumin，et al. On bolting support of roadway in extremely soft seam of coal mine with complex roof[J]. Chinese Journal of Rock Mechanics and Engineering，2001，20(1)：53-56.(in Chinese))
[9]	王明恕，何修仁，郑雨天. 全长锚固锚杆的力学模型及其应用[J]. 金属矿山，1983，(4)：21-24.(WANG Mingshu，HE Xiuren，ZHENG Yutian. The mechanics model of full length anchoring bolts and its application[J]. Metal Mine，1983，(4)：21-24.(in Chinese))
[10]	刘少伟，何亚飞，付孟雄，等. 矿用树脂锚固剂固胶比与锚固性能关系研究[J]. 煤炭学报，https：//doi.org /10.13 225/j.cnki.jccs. 2021.0126. [2021‐05‐24]. (LIU Shaowei，HE Yafei，FU Mengxiong，et al. Study on the relationship between catalyst-resin mastic ratio and anchoring performance of mineral resin grout[J]. Journal of China Coal Society，https：// doi.org/10.13225/ j.cnki.jccs. 2021.0126，[2021‐05‐24].(in Chinese))
[13]	CAO C，REN T，COOK C. Introducing aggregate into grouting material and its influence on load transfer of the rock bolting system[J]. International Journal of Mining Science and Technology，2014，24：325-328.
[15]	郑重远，黄乃炯. 树脂锚杆及锚固剂[M]. 北京：煤炭工业出版社，1983：30‐55.(ZHENG Zhongyuan，HUANG Naijiong．Resin anchor and anchoring agent[M]. Beijing：Coal Industry Press，1983：30‐55.(in Chinese))
[17]	CAMPBELL R，MOULD R，ACGREGOR S. Investigation into the extent and mechanisms of gloving and un-mixed resin fully encapsulated roof bolts[C]// Proceedings of 2003 Coal Operators Conference. Wollongong：University of Wollongong，2004：203-214.