层理和预制裂纹方向对煤断裂力学性质影响规律试验研究

doi:10.13722/j.cnki.jrme.2021.0735

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (14019 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To study the coupling influences of bedding and pre-crack directions on the fracture characteristics of coal，quasi-static loading experiments on SCB coal specimens with pre-crack were conducted，and the acoustic emissions during deformation and failure process were monitored. Regarding coal as a transversely isotropic body，the dimensionless factor was calibrated by finite element code，and the fracture toughness more in line with the actual situation was obtained. The results indicate that different combinations of bedding and pre-crack direction lead to significant differences in the loading curves and the fracture loads of specimens. In addition，the fracture modes and the fracture toughness are jointly affected by the bedding and the pre-crack direction. Meanwhile，the fracture toughness declines with decreasing the angle between the bedding and the loading direction，and the inclined pre-crack further weakens the resistance ability of specimens against crack propagation. Tensile failure dominates the crack initiation and propagation，and the propagation path of specimens shows significant anisotropy. According to the final crack morphology，the macroscopic failure modes of specimens can be divided into 4 types. The number of acoustic emission hits corresponds to the loading history，and the average total hit number at post-fracture load(including fracture load) stage varies obviously with the change of the pre-crack direction due to the different structure failure. Under external loading，specimens are damaged with tensile and shear micro-cracks continuously generating inside the specimens. The damage evolution is tightly related to the bedding and pre-crack directions. At different loading levels，tensile micro-cracks play a domination role，while the proportion of the shear micro-cracks is relatively low. With increasing the loading level，the micro-cracks continue to develop and propagate，and the damage of the specimens accumulates continuously，resulting in the crack initiation and failure.

Key words： rock mechanics bedding direction pre-crack direction transversely isotropic acoustic emission

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Wei1
	2
	ZHAO Yixin1
	2
	GAO Yirui1
	2
	ZHANG Cun1
	2

Cite this article:

WANG Wei1,2,ZHAO Yixin1, et al. Experimental research of influences of bedding and pre-crack directions on fracture characteristics of coal[J]. , 2022, 41(3): 433-445.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2021.0735 OR https://rockmech.whrsm.ac.cn/EN/Y2022/V41/I3/433

[1]	ULUSAY R. The ISRM suggested methods for rock characterization，testing and monitoring，2007-2014[M]. Switzerland：Springer International Publishing：2014：107-114.
[2]	ALIHA M R M，AYATOLLAHI M R. Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading—A statistical approach[J]. Theoretical and Applied Fracture Mechanics，2014，69(SI)：17-25.
[3]	WEI M，DAI F，XU N，et al. An experimental and theoretical assessment of semi-circular bend specimens with chevron and straight-through notches for mode I fracture toughness testing of rocks[J]. International Journal of Rock Mechanics and Mining Sciences，2017，99：28-38.
[4]	WEI M，DAI F，XU N，et al. Experimental and numerical study on the cracked chevron notched semi-circular bend method for characterizing the mode I fracture toughness of rocks[J]. Rock Mechanics and Rock Engineering，2016，49(5)：1 595-1 609.
[5]	WEI M，DAI F，LIU Y，et al. Influences of loading method and notch type on rock fracture toughness measurements：from the perspectives of T-stress and fracture process zone[J]. Rock Mechanics and Rock Engineering，2021，54(9)：4 965.
[6]	DAI F，CHEN R，XIA K. A semi-circular bend technique for determining dynamic fracture toughness[J]. Experimental Mechanics，2010，50(6)：783-791.
[7]	WEI M D，DAI F，XU N W，et al. Experimental and numerical study on the fracture process zone and fracture toughness determination for ISRM-suggested semi-circular bend rock specimen[J]. Engineering Fracture Mechanics，2016，154：43-56.
[8]	宋义敏，邢同振，吕祥锋，等. 不同加载速率Ⅰ型预制裂纹花岗岩断裂特征研究[J]. 岩土力学，2018，39(12)：4 369-4 376.(SONG Yimin，XING Tongzhen，LÜ Xiangfeng，et al. Fracture characteristics of granite with mode-I pre-crack at different loading rates[J]. Rock and Soil Mechanics，2018，39(12)：4 369-4 376.(in Chinese))
[9]	李清，徐文龙，郭洋，等. 单向静压下柱状炮孔端部爆生裂纹的扩展规律[J]. 振动与冲击，2020，39(13)：91-96.(LI Qing，XU Wenlong，GUO Yang，et al. Propagation law of blasting crack at end of cylinder blast hole under uniaxial static pressure[J]. Journal of Vibration and Shock，2020，39(13)：91-96.(in Chinese))
[10]	YUE Z，SONG Y，LI P，et al. Applications of digital image correlation (DIC) and the strain gage method for measuring dynamic mode I fracture parameters of the white marble specimen[J]. Rock Mechanics and Rock Engineering，2019，52(11)：4 203-4 216.
[11]	宋义敏，李肖飞，许海亮，等. 基于裂纹界面摩擦滑动演化的岩石断裂研究[J]. 中国矿业大学学报，2020，49(2)：255-261.(SONG Yimin，LI Xiaofei，XU Hailiang，et al. Research on rock fracture based on the evolution of friction sliding of crack interface[J]. Journal of China University of Mining and Technology，2020，49(2)：255-261.(in Chinese))
[12]	代树红，马胜利，潘一山，等. 数字散斑相关方法测定岩石Ⅰ型应力强度因子[J]. 岩石力学与工程学报，2012，31(12)：2 501-2 507. (DAI Shuhong，MA Shengli，PAN Yishan，et al. Evaluation of mode I stress intensity factor of rock utilizing digital speckle correlation method[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(12)：2 501-2 507.(in Chinese))
[13]	刘邦，朱哲明，刘瑞峰，等. 爆炸作用下隧道拱肩I/II复合型裂纹起裂及扩展规律研究[J]. 岩石力学与工程学报，2021，40(10)： 2 048-2 061.(LIU Bang，ZHU Zheming，LIU Ruifeng，et al. Study on initiation and propagation law of mixed mode I/II crack in tunnel spandrel under explosion[J]. Chinese Journal of Rock Mechanics and Engineering，2021，40(10)：2 048-2 061.(in Chinese))
[14]	ZHAO Y，GONG S，HAO X，et al. Effects of loading rate and bedding on the dynamic fracture toughness of coal：Laboratory experiments[J]. Engineering Fracture Mechanics，2017，178：375-391.
[15]	DAI F，XIA K W. Laboratory measurements of the rate dependence of the fracture toughness anisotropy of Barre granite[J]. International Journal of Rock Mechanics and Mining Sciences，2013，60：57-65.
[16]	吕有厂. 层理性页岩断裂韧性的加载速率效应试验研究[J]. 岩石力学与工程学报，2018，37(6)：1 359-1 370.(LYU Youchang. Effect of bedding plane direction on fracture toughness of shale under different loading rates[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(6)：1 359-1 370.(in Chinese))
[17]	FENG G，KANG Y，CHEN F，et al. The influence of temperatures on mixed-mode(I + II) and mode-II fracture toughness of sandstone[J]. Engineering Fracture Mechanics，2018，189：51-63.
[18]	FUNATSU T，KURUPPU M，MATSUI K. Effects of temperature and confining pressure on mixed-mode(I-II) and mode II fracture toughness of Kimachi sandstone[J]. International Journal of Rock Mechanics and Mining Sciences，2014，67：1-8.
[19]	杨健锋，梁卫国，陈跃都，等. 不同水损伤程度下泥岩断裂力学特性试验研究[J]. 岩石力学与工程学报，2017，36(10)：2 431-2 440. (YANG Jianfeng，LIANG Weiguo，CHEN Yuedu，et al. Experiment research on the fracturing characteristics of mudstone with different degrees of water damage[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(10)：2 431-2 440.(in Chinese))
[20]	殷志强，谢广祥，胡祖祥，等. 不同瓦斯压力下煤岩三点弯曲断裂特性研究[J]. 煤炭学报，2016，41(2)：424-431.(YIN Zhiqiang，XIE Guangxiang，HU Zuxiang，et al. Investigation on fracture mechanism of coal rock on three-point bending tests under different gas pressures[J]. Journal of China Coal Society，2016，41(2)：424-431.(in Chinese))
[21]	赵毅鑫，肖汉，黄亚琼. 霍普金森杆冲击加载煤样巴西圆盘劈裂试验研究[J]. 煤炭学报，2014，39(2)：286-291.(ZHAO Yixin，XIAO Han，HUANG Yaqiong．Dynamic split tensile test of Brazilian disc of coal with split Hopkinson pressure bar loading[J]. Journal of China Coal Society，2014，39(2)：286-291.(in Chinese))
[22]	王辉，李勇，曹树刚，等. 基于巴西劈裂实验的层状页岩断裂特征试验研究[J]. 采矿与安全工程学报，2020，37(3)：604-612. (WANG Hui，LI Yong，CAO Shugang，et al. Experimental study on fracture characteristics of layered shale under Brazilian splitting tests[J]. Journal of Mining and Safety Engineering，2020，37(3)：604-612.(in Chinese))
[23]	SHI X，YAO W，LIU D，et al. Experimental study of the dynamic fracture toughness of anisotropic black shale using notched semi-circular bend specimens[J]. Engineering Fracture Mechanics，2019，205：136-151.
[24]	WANG Y，YANG R. Study of the dynamic fracture characteristics of coal with a bedding structure based on the NSCB impact test[J]. Engineering Fracture Mechanics，2017，184：319-338.
[25]	WANG W，ZHAO Y，TENG T，et al. Influence of bedding planes on mode I and mixed-mode (I-II) dynamic fracture toughness of coal：Analysis of experiments[J]. Rock Mechanics and Rock Engineering，2021，54(1)：173-189.
[26]	王兴渝，朱哲明，邱豪，等. 冲击荷载下层理对页岩内裂纹扩展行为影响规律的研究[J]. 岩石力学与工程学报，2019，38(8)：1 542- 1 556.(WANG Xingyu，ZHU Zheming，QIU Hao，et al. Study of the effect of stratifications on crack propagation behaviors in shale under impacting loads[J]. Chinese Journal of Rock Mechanics and Engineering，2019，38(8)：1 542-1 556.(in Chinese))
[27]	谢和平，陈忠辉. 岩石力学[M]. 北京：科学出版社，2004：176-190.(XIE Heping，CHEN Zhonghui. Rock mechanics[M]. Beijing：Science Press，2004：176-190.(in Chinese))
[28]	王蒙，朱哲明，王雄. 冲击荷载作用下的Ⅰ/Ⅱ复合型裂纹扩展规律研究[J]. 岩石力学与工程学报，2016，35(7)：1 323-1 332.(WANG Meng，ZHU Zheming，WANG Xiong. The growth of mixed-mode I/II crack under impacting loads[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(7)：1 323-1 332.(in Chinese))
[29]	东振，刘亚东，鲍清英，等. 基于断裂力学的煤层气井破裂压力计算方法[J]. 东北石油大学学报，2015，39(6)：111-120.(DONG Zhen，LIU Yadong，BAO Qingying，et al. Calculation method for fracture pressure of coalbed methane well based on fracture mechanics[J]. Journal of Northeast Petroleum University，2015，39(6)：111-120.(in Chinese))
[30]	陈立超，王生维. 煤岩断裂力学性质对储层压裂改造的影响[J]. 天然气地球科学，2020，31(1)：122-131.(CHEN Lichao，WANG Shengwei. Fracture properties of high-rank coal and its constraint on hydraulic fracturing stimulation of coal reservoir[J]. Natural Gas Geoscience，2020，31(1)：122-131.(in Chinese))
[31]	赵伏军，李夕兵，胡柳青. 巷道放顶煤法的顶煤破碎机制研究[J]. 岩石力学与工程学报，2002，21(增2)：2 309-2 313.(ZHAO Fujun，LI Xibing，HU Liuqing. Research on crack mechanism of top coal in steep coal seam[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(Supp.2)：2 309-2 313.(in Chinese))
[32]	LIM I L，JOHNSTON I W，CHOI S K. Stress intensity factors for semi-circular specimens under three-point bending[J]. Engineering Fracture Mechanics，1993，44(3)：363-382.
[33]	AYATOLLAHI M R，ALIHA M R M. Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading[J]. Computational Materials Science，2007，38(4)：660-670.
[34]	NEJATI M，AMINZADEH A，AMANN F，et al. Mode I fracture growth in anisotropic rocks：Theory and experiment[J]. International Journal of Solids and Structures，2020，195：74-90.
[35]	NEJATI M，AMINZADEH A，SAAR M O，et al. Modified semi-circular bend test to determine the fracture toughness of anisotropic rocks[J]. Engineering Fracture Mechanics，2019，213：153-171.
[36]	WANG W，ZHAO Y，SUN Z，et al. Effects of bedding planes on the fracture characteristics of coal under dynamic loading[J]. Engineering Fracture Mechanics，2021，250：107761.
[37]	ALIHA M R M，AYATOLLAHI M R，SMITH D J，et al. Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading[J]. Engineering Fracture Mechanics，2010，77(11)：2 200-2 212.
[38]	AYATOLLAHI M R，ALIHA M R M，HASSANI M M. Mixed mode brittle fracture in PMMA—An experimental study using SCB specimens[J]. Materials Science and Engineering：A，2006，417(1)：348-356.
[39]	王辉，李勇，曹树刚，等. 含预制裂隙黑色页岩裂纹扩展过程及宏观破坏模式巴西劈裂试验研究[J]. 岩石力学与工程学报，2020，39(5)：912-926.(WANG Hui，LI Yong，CAO Shugang，et al. Brazilian splitting test study on crack propagation process and macroscopic failure mode of pre-cracked black shale[J]. Chinese Journal of Rock Mechanics and Engineering，2020，39(5)：912-926. (in Chinese))
[40]	李英杰，钟立博，左建平. 页岩I型裂纹遇层理起裂扩展准则研究[J]. 中国矿业大学学报，2020，49(3)：488-498.(LI Yingjie，ZHONG Libo，ZUO Jianping. Crack initiation and propagation criteria of mode I crack encountering bedding plane for shale[J]. Journal of China University of Mining and Technology，2020，49(3)：488-498.(in Chinese))
[41]	WANG J，XIE L，XIE H，et al. Effect of layer orientation on acoustic emission characteristics of anisotropic shale in Brazilian tests[J]. Journal of Natural Gas Science and Engineering，2016，36(SI)：1 120-1 129.
[42]	DU K，LI X，TAO M，et al. Experimental study on acoustic emission (AE) characteristics and crack classification during rock fracture in several basic lab tests[J]. International Journal of Rock Mechanics and Mining Sciences，2020，133：104411.
[43]	何满潮，赵菲，杜帅，等. 不同卸载速率下岩爆破坏特征试验分析[J]. 岩土力学，2014，35(10)：2 737-2 747.(HE Manchao，ZHAO Fei，DU Shuai，et al. Rock burst characteristics based on experimental tests under different unloading rates[J]. Rock and Soil Mechanics，2014，35(10)：2 737-2 747.(in Chinese))
[44]	赵毅鑫，孙荘，刘斌. 忻州窑烟煤I型和II型断裂特性的半圆弯曲试验对比研究[J]. 岩石力学与工程学报，2019，38(8)：1 593- 1 604.(ZHAO Yixin，SUN Zhuang，LIU Bin. Comparative study of semi-circular bending tests for modes I and II fracture characteristics of Xinzhouyao bituminous coal[J]. Chinese Journal of Rock Mechanics and Engineering，2019，38(8)：1 593-1 604.(in Chinese))
[45]	YAO Q，CHEN T，TANG C，et al. Influence of moisture on crack propagation in coal and its failure modes[J]. Engineering Geology，2019，258：105156.
[46]	谢和平，陈至达. 岩石断裂的微观机制分析[J]. 煤炭学报，1989，14(2)：57-67.(XIE Heping，CHEN Zhida. Analysis of microscopic mechanism of rock fracture[J]. Journal of China Coal Society，1989，14(2)：57-67.(in Chinese))
[47]	左建平，谢和平，周宏伟，等. 温度-拉应力共同作用下砂岩破坏的断口形貌[J]. 岩石力学与工程学报，2007，16(12)：2 444-2 457. (ZUO Jianping，XIE Heping，ZHOU Hongwei，et al. Fractography of sandstone failure under temperature-tensile stress coupling effects[J]. Chinese Journal of Rock Mechanics and Engineering，2007，16(12)：2 444-2 457.(in Chinese))