高地应力下深部岩芯饼化裂缝发展规律及机制研究

doi:10.13722/j.cnki.jrme.2021.0547

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (40629 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In this paper，the macro characteristics and micro scanning results of the discing cores from hot dry rock wells in Gonghe Basin，Qinghai Province were analyzed，and then，the fracture evolution in the process of core drilling under different types of stress states was analyzed to explore the underlying mechanism of core discing from the micro perspective using the hybrid DEM-continuum method. The following results can be drawn. Firstly，the observed shapes of discing cores can be divided into four types according to the thickness，i.e.，crushed discing，thin discing，discing and thick discing，and the fracture surfaces，most of which are rough and uneven，present saddle，flat，cup-shaped concave and ellipse shapes. Secondly，the rock core discing is attributed to the tensile failure. Thirdly，the high horizonal principal stress is the main factor inducing core discing and leads to the zonal distribution of fractures and the cup-shaped concave surface at the root of the cores. The vertical stress restrains the zonal distribution of fractures，and the high vertical stress could result in a flat-shaped section in the case of low horizonal stress. Fourthly，under the influence of the stress redistribution，a large amount of fractures generate at the root of the core and the existing fractures at the upper part of the core continue to develop，augmenting core discing. Fifthly，the horizontal stress difference affects both the distribution and the strike of the fractures. The strike of the fractures is mainly along the direction of the maximum horizontal stress，and the fractures gather near the core edge. Sixthly，the strike of the fractures is also affected by the three-dimensional stress level. The proportion of the fractures striking along the maximum horizontal stress increases with decreasing the minimum horizontal stress or increasing the vertical stress. However，the indication effect of the fracture strike on the stress direction is minimized under high maximum horizontal principal stress.

Key words： rock mechanics core discing hybrid DEM-continuum method in-situ stress fracture propagation

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Fengshou1
	2
	LI Mengli1
	2
	ZHANG Chongyuan3
	4
	HE Manchao1
	2
	4
	ZHANG Shengsheng5
	HENG De6

Cite this article:

ZHANG Fengshou1,2,LI Mengli1, et al. Study on fracture propagation and formation mechanism of core discing at depth under high in-situ stresses[J]. , 2022, 41(3): 533-542.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2021.0547 OR http://rockmech.whrsm.ac.cn/EN/Y2022/V41/I3/533

[10]	HAST N. The measurement of rock pressure in mines[M]. Stockholm：Norstedt，1958：1-183.
[14]	刘竹华，姚宝魁，杨家录. 钻孔岩芯饼状断裂破坏机制[J]. 工程地质学报，1997，5(4)：330-334.(LIU Zhuhua，YAO Baokui，YANG Jialu. Fracture mechanism of the discal drill core[J]. Journal of Engineering Geology，1997，5(4)：330-334.(In Chinese))
[18]	JAEGER J C，COOK N G W. Pinching-off and disking of rocks[J]. Journal of Geophysical Research，1963，68(6)：1 759-1 765.
[13]	SONG I. Borehole breakouts and core disking in westerly granite：mechanisms of formation and relationship in situ stress[Ph. D. Thesis][D]. Madison：University of Wisconsin，1998.
[16]	黄厚旭，吕亚茹，蔡毅. 卸荷取芯岩柱间隔断裂机制分析与岩芯饼化机制[J]. 岩石力学与工程学报，2020，39(5)：1 005-1 010. (HUANG Houxu，LV Yaru，CAI Yi. Interval fracturing of unloading rock-columns and disking mechanisms of rock cores[J]. Chinese Journal of Rock Mechanics and Engineering，2020，39(5)：1 005- 1 010.(in Chinese))
[19]	ISHIDA T，SAITO T. Observation of core discing and in situ stress measurements；stress criteria causing core discing[J]. Rock Mechanics and Rock Engineering，1995，28(3)：167-182.
[21]	LI Y，SCHMITT D R. Drilling-induced core fractures and in situ stress[J]. Journal of Geophysical Research：Solid Earth，1998，103(B3)：5 225-5 239.
[23]	KANG S S，ISHIGURO Y，OBARA Y. Evaluation of core disking rock stress and tensile strength via the compact conical-ended borehole overcoring technique[J]. International Journal of Rock Mechanics and Mining Sciences，2006，43(8)：1 226-1 240.
[24]	ZHENG M，LI S，YAO Z，et al. Core discing characteristics and mitigation approach by a novel developed drill bit in deep rocks[J]. Journal of Central South University，2020，27(10)：2 822-2 833.
[26]	WU S，WU H，KEMENY J. Three-dimensional discrete element method simulation of core disking[J]. Acta Geophysica，2018，66(3)：267-282.
[29]	张森琦，严维德，黎敦朋，等. 青海省共和县恰卜恰干热岩体地热地质特征[J]. 中国地质，2018，45(6)：1 087-1 102.(ZHANG Senqi，YAN Weide，LI Dunpeng，et al. Characteristics of geothermal geology of the Qiabuqia HDR in Gonghe Basin，Qinghai Province[J]. Geology in China，2018，45(6)：1 087-1 102.(in Chinese))
[31]	左建平，谢和平，周宏伟，等. 温度-拉应力共同作用下砂岩破坏的断口形貌[J]. 岩石力学与工程学报，2007，26(12)：2 444-2 457. (ZUO Jianping，XIE Heping，ZHOU Hongwei，et al. Fractography of sandstone failure under temperature-tensile stress coupling effects[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(12)：2 444-2 457.(in Chinese))
[7]	张国锋，朱伟，赵培. 徐州矿区深部地应力测量及区域构造作用分析[J]. 岩土工程学报，2012，34(12)：2 318-2 324.(ZHANG Guofeng，ZHU Wei，ZHAO Pei. In-situ stress measurements and analysis of action of geological structures of deep coal mines in Xuzhou[J]. Chinese Journal of Geotechnical Engineering，2012，34(12)：2 318-2 324.(in Chinese))
[17]	OBERT L，STEPHENSON D E. Stress conditions under which core discing occurs[J]. Society of Mining Engineers，1965，232(3)：227-235.
[27]	BREUGNOT A，LAMBERT S，VILLARD P，et al. A discrete/ continuous coupled approach for modeling impacts on cellular geostructures[J]. Rock Mechanics and Rock Engineering，2016，49(5)：1 831-1 848.
[33]	谭林，郭原. 开孔有限平板应力集中问题的有限元分析[J]. 重庆理工大学学报：自然科学，2015，29(7)：35-39.(TAN Lin，GUO Yuan. Finite element analysis of finite plates for stress concentration of holes[J]. Journal of Chongqing University of Technology：Natural Science，2015，29(7)：35-39.(in Chinese))
[34]	POTYONDY D O. The bonded-particle model as a tool for rock mechanics research and application：current trends and future directions[J]. Geosystem Engineering，2015，18(1)：1-28.
[5]	钟山，江权，冯夏庭，等. 锦屏深部地下实验室初始地应力测量实践[J]. 岩土力学，2018，39(1)：356-366.(ZHONG Shan，JIANG Quan，FENG Xiating，et al. A case of in-situ stress measurement in Chinese Jinping underground laboratory[J]. Rock and Soil Mechanics，2018，39(1)：356-366.(in Chinese))
[15]	HUANG H，FAN P，LI J，et al. A theoretical explanation for rock core disking in triaxial unloading test by considering local tensile stress[J]. Acta Geophysica，2016，64(5)：1 430-1 445.
[25]	CUNDALL P A，STRACK O D L. A discrete numerical model for granular assemblies[J]. Geotechnique，1979，29(1)：47-65.
[35]	POTYONDY D O. PFC Development technical memorandum (ICG7233-L)[R]. Minneapolis：Itasca Consulting Group，Inc.，2012.
[2]	侯发亮，贾愚如. 岩芯饼化的应力分析[J]. 岩土工程学报，1984，6(5)：48-58.(HOU Faliang，JIA Yuru. Stress analysis for rock core discing[J]. Chinese Journal of Geotechnical Engineering，1984，6(5)：48-58.(in Chinese))
[12]	马天辉，王龙，徐涛，等. 岩芯饼化机制及应力分析[J]. 东北大学学报：自然科学版，2016，37(10)：1 491-1 495.(MA Tianhui，WANG Long，XU Tao，et al. Mechanism and stress analysis of rock core discing[J]. Journal of Northeastern University：Natural Science，2016，37(10)：1 491-1 495.(in Chinese))
[22]	姜谙男，曾正文，唐春安. 岩芯成饼单元安全度三维数值试验及地应力反馈分析[J]. 岩石力学与工程学报，2010，29(8)：1 610-1 617. (JIANG Annan，ZENG Zhengwen，TANG Chun¢an. Three-dimensional numerical test of element safety degree of rock core discing and feed-back analysis of geostresses[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(8)：1 610-1 617.(in Chinese))
[32]	谢和平，陈至达. 岩石断裂的微观机制分析[J]. 煤炭学报，1989，14(2)：57-67.(XIE Heping，CHEN Zhida. Analysis of rock fracture micro-mechanism[J]. Journal of China Coal Society，1989，14(2)：57-67.(in Chinese))
[1]	何满潮，谢和平，彭苏萍，等. 深部开采岩体力学研究[J]. 岩石力学与工程学报，2005，24(16)：2 803-2 813.(HE Manchao，XIE Heping，PENG Suping，et al. Study on rock mechanics in deep mining engineering[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(16)：2 803-2 813.(in Chinese))
[4]	李占海，李邵军，冯夏庭，等. 深部岩体岩芯饼化特征分析与形成机制研究[J]. 岩石力学与工程学报，2010，30(11)：2 254-2 266.(LI Zhanhai，LI Shaojun，FENG Xiating，et al. Characteristics and formation mechanism of core disking in deep rock mass[J]. Chinese Journal of Rock Mechanics and Engineering，2010，30(11)：2 254- 2 266.(in Chinese))
[8]	MATSUKI K，KAGA N，YOKOYAMA T，et al. Determination of three dimensional in situ stress from core discing based on analysis of principal tensile stress[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(7)：1 167-1 190.
[9]	李彦恒，谭可可，冯利. 基于岩饼几何形态测量的原地应力测定方法[J]. 岩土力学，2012，33(增2)：224-228.(LI Yanheng，TAN Keke，FENG Li. Estimation of in situ geostress states from measuring shape of disked core[J]. Rock and Soil Mechanics，2012，33(Supp.2)：224-228.(in Chinese))
[11]	LIM S S，MARTIN C D. Core disking and its relationship with stress magnitude for Lac du Bonnet granite[J]. International Journal of Rock Mechanics and Mining Sciences，2010，47(2)：254-264.
[3]	刘世煌. 拉西瓦水电站的岩芯饼化现象[J]. 西北水电技术，1988，(3)：11-18.(LIU Shihuang. Disced rock phenomenon of Laxiwa hydroelectric station[J]. Northwest Hydropower Technology，1988，(3)：11-18.(in Chinese))
[6]	唐绍辉，吴壮军，陈向华. 地下深井矿山岩爆发生规律及形成机制研究[J]. 岩石力学与工程学报，2003，22(8)：1 250-1 254.(TANG Shaohui，WU Zhuangjun，CHEN Xianghua. Approach to occurrence and mechanism of rockburst in deep underground mines[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(8)：1 250-1 254. (in Chinese))
[20]	LI Y，SCHMITT D R. Effects of Poisson¢s ratio and core stub length on bottomhole stress concentrations[J]. International Journal of Rock Mechanics and Mining Sciences，1997，34(5)：761-773.
[28]	WANG T，HUANG H，ZHANG F，et al. DEM-continuum mechanics coupled modeling of slot-shaped breakout in high-porosity sandstone[J]. Tunnelling and Underground Space Technology，2020，98：103348.
[30]	张超，张盛生，李胜涛，等. 共和盆地恰卜恰地热区现今地热特征[J]. 地球物理学报，2018，61(11)：4 545-4 557.(ZHANG Chao，ZHANG Shengsheng，LI Shengtao，et al. Geothermal characteristics of the Qiabuqia geothermal area in the Gonghe Basin，Northeastern Tibetan Plateau[J]. Chinese Journal of Geophysics，2018，61(11)： 4 545-4 557.(in Chinese))
[36]	STACEY T R. Contribution to the mechanism of core discing[J]. Journal of the Southern African Institute of Mining and Metallurgy，1982，82(9)：269-274.