基于数控岩石压痕试验装置的岩石力学参数反演研究

doi:10.13722/j.cnki.jrme.2022.1001

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (3815 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To obtain the distribution of rock mechanical parameters，a rock indentation equipment was developed based on the digital control three-dimensional platform，and a parameter acquisition method based on this equipment was proposed. The correction formula of the load-displacement curve for the testing machine was established by integrating different indentation tests with the refined three-dimensional numerical simulation and considering the effect of the test procedure and frame stiffness. Then，a large number of numerical simulations and parameter sensitivity analysis for this equipment were conducted，and the classical Oliver-Pharr formula was improved to precisely determine the elastic parameter of rocks. The results indicated that there was a great difference between the estimated elastic modulus by the classical Oliver-Pharr formula and measured values. The proposed improved Oliver-Pharr formula gave a better performance in predictions of the elastic modulus for three types of rocks，with relative errors of 5.83%(granite)，5.14%(marble) and 10.79%(sandstone)，respectively. Moreover，the plastic parameter of rocks was determined based on the indentation test by establishing the relationship between the cohesive and the plastic region area(S) and the difference between the unloading stiffness and the secant stiffness of the loading phase(Kp)，respectively. Compared the results with the measured cohesion by the experimental test，we found that the formula of stiffness difference based on the M-C model gave a better performance in estimating the cohesion of rocks，with relative errors of 17.81%(marble) and 21.93%(sandstone)，respectively. Moreover，the discussion was conducted in terms of the acquisition of the spatial parameter fields of rocks and rock damage based on the testing device. The results of this research presented an efficient approach to obtain rock mechanical parameters fields and provided support for the parameter selection of the refined numerical simulation in rock mechanics.

Key words： rock mechanics indentation test numerical simulation back analysis digital control platform

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Yiming1
	ZHAO Gaofeng1
	ZHAO Xiaobao2
	LI Haibo3

Cite this article:

LI Yiming1,ZHAO Gaofeng1,ZHAO Xiaobao2, et al. Study on back analysis of rock mechanical parameters based on the digital control rock indentation equipment[J]. , 2023, 42(8): 1973-1987.

URL:

http://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2022.1001 OR http://rockmech.whrsm.ac.cn/EN/Y2023/V42/I8/1973

[44]	MASSON Y，PRIDE S R. Mapping the mechanical properties of rocks using automated microindentation tests[J]. Journal of Geophysical Research：Solid Earth，2015，120(10)：7 138-7 155.
[48]	WANG F，KONIETZKY H. Thermo-mechanical properties of granite at elevated temperatures and numerical simulation of thermal cracking[J]. Rock Mechanics and Rock Engineering，2019，52(3)：3 737-3 755.
[2]	YANG L Q，FENG X D，SUN Y. Predicting the Young?s Modulus of granites using the Bayesian model selection approach[J]. Bulletin of Engineering Geology and the Environment，2019，78(5)：3 413-3 423.
[5]	TANDON R S，GUPTA V. Estimation of strength characteristics of different Himalayan rocks from Schmidt hammer rebound，point load index，and compressional wave velocity[J]. Bulletin of Engineering Geology and the Environment，2015，74(2)：521-533.
[7]	MOMENI E，ARMAGHANI D J，HAJIHASSANI M，et al. Prediction of uniaxial compressive strength of rock samples using hybrid particle swarm optimization-based artificial neural networks[J]. Measurement，2015，60：50-63.
[9]	FAN M，JIN Y，CHEN M，et al. Mechanical characterization of shale through instrumented indentation test[J]. Journal of Petroleum Science and Engineering，2019，174：607-616.
[3]	MASOUMI H，SAYDAM S，HAGAN P C. Unified size-effect law for intact rock[J]. International Journal of Geomechanics，2016，16(2)：04015059.1-04015059.15.
[1]	YIN J H，WONG R H C，CHAU K T，et al. Point load strength index of granitic irregular lumps：size correction and correlation with uniaxial compressive strength[J]. Tunnelling and Underground Space Technology，2017，(70)：388-399.
[4]	ALIYU M M，SHANG J，MURPHY W，et al. Assessing the uniaxial compressive strength of extremely hard cryptocrystalline flint[J]. International Journal of Rock Mechanics and Mining Sciences，2019，113：310-321.
[6]	TANDON R S，GUPTA V. Estimation of strength characteristics of different Himalayan rocks from Schmidt hammer rebound，point load index，and compressional wave velocity[J]. Bulletin of Engineering Geology and the Environment，2014，74(2)：521-533.
[8]	HAFTANI M，BOHLOLI B，MOOSAVI M，et al. A new method for correlating rock strength to indentation tests[J]. Journal of Petroleum Science and Engineering，2013，112(112)：24-31.
[10]	CHESHOMI A，HAJIPOUR G，HASSANPOUR J，et al. Estimation of uniaxial compressive strength of shale using indentation testing[J]. Journal of Petroleum Science and Engineering，2017，151：24-30.
[12]	OLIVER W C，PHARR G M. An improved technique for determining hardness and elastic modulus[J]. Journal of Materials Research，1992，7(6)：1 564-1 583.
[13]	SZWEDZICKI T. Indentation hardness testing of rock[J]. International Journal of Rock Mechanics and Mining Sciences，1998，35(6)：825-829.
[15]	孙长伦，李桂臣，许嘉徽. 砂岩矿物组分流变特性纳米压痕实验研究[J]. 岩石力学与工程学报，2021，40(1)：77-87.(SUN Changlun，LI Guichen，XU Jiahui. Rheological characteristics of mineral components in sandstone based on nanoindentation[J]. Chinese Journal of Rock Mechanics and Engineering，2021，40(1)：77-87.(in Chinese))
[17]	何智海，倪雅倩，杜时贵，等. 纳米压痕技术在岩石材料中的应用与研究进展[J]. 岩石力学与工程学报，2022，41(10)：2 045-2 066. (HE Zhihai，NI Yaqian，DU Shigui，et al. Application and research progress of nanoindentation technology in rock materials[J]. Chinese Journal of Rock Mechanics and Engineering，2022，41(10)：2 045- 2 066.(in Chinese))
[19]	MOUSAVI E，CHESHOMI A，ASHTARI M. Estimating elasticity modulus and uniaxial compressive strength of sandstone using indentation test[J]. Journal of Petroleum Science and Engineering，2018，169：157-166.
[21]	ZENG Q，WU Y K，LIU Y Q，et al. Determining the micro-fracture properties of Antrim gas shale by an improved micro-indentation method [J]. Journal of Natural Gas Science and Engineering，2019，62：224-235.
[22]	SEBASTIANI M，JOHANNS K E，HERBERT E G，et al. Measurement of fracture toughness by nanoindentation methods： Recent advances and future challenges[J]. Current Opinion in Solid State and Materials Science，2015，19(6)：324-333.
[11]	OLIVER W C，PHARR G M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments[J]. Journal of Materials Research，1992，7(6)：1 564-1 583.
[18]	OLIVER W M. PHARR G. Measurement of hardness and elastic modulus by instrumented indentation：Advances in understanding and refinements to methodology[J]. Journal of Materials Research，2004，19(1)：3-20.
[20]	HAFTANI M，BOHLOLI B，NOURI A，et al. Influence of penetration rate and indenter diameter in strength measurement by indentation testing on small rock specimens[J]. Rock Mechanics and Rock Engineering，2015，48(2)：527-534.
[24]	KASYAP S S，SENETAKIS K. Characterization of two types of shale rocks from Guizhou China through micro-indentation，statistical and machine-learning tools[J]. Journal of Petroleum Science and Engineering，2022，208：1-14.
[26]	TKALICH D，FOURMEAU M，KANE A，et al. Experimental and numerical study of Kuru granite under confined compression and indentation[J]. International Journal of Rock Mechanics and Mining Sciences，2016，87：55-68.
[27]	SHARIATI H，SAADATI M，BOUTERF A，et al. On the inelastic mechanical behavior of granite：study based on quasi-oedometric and indentation tests[J]. Rock Mechanics and Rock Engineering，2019，52(3)：645-657.
[28]	MAGNENET V，AUVRAY C，DJORDEM S，et al. On the estimation of elastoplastic properties of rocks by indentation tests[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(3)：635-642.
[29]	HAN Y，ABOUSLEIMAN Y N，HULL K L，et al. Numerical modeling of elastic spherical contact for mohr-coulomb type failures in micro-geomaterials[J]. Experimental Mechanics，2017，57(7)：1 091-1 105.
[31]	OLSSON E，JELAGIN D，FORQUIN P A. Computational framework for analysis of contact-induced damage in brittle rocks[J]. International Journal of Solids and Structures，2019，167：24-35.
[33]	WANG Z L，LI Y C，SHEN R F. Correction of soil parameters in calculation of embankment settlement using a BP network back-analysis model[J]. Engineering Geology，2007，91(2/4)：168-177.
[35]	LI Y M，ZHAO G F. A numerical integrated approach for the estimation of the uniaxial compression strength of rock from point load tests[J]. International Journal of Rock Mechanics and Mining Sciences，2021，148：1-10.
[36]	唐春安，赵文. 岩石破裂全过程分析软件系统RFPA2D[J]. 岩石力学与工程学报，1997，16(5)：507-508.(TANG Chun?an，ZHAO Wen. RFPA2D system for rock failure process analysis[J]. Chinese Journal of Rock Mechanics and Engineering，1997，16(5)：507-508. (in Chinese))
[14]	LEITE M H，FERLAND F. Determination of unconfined compressive strength and Young?s modulus of porous materials by indentation tests[J]. Engineering Geology，2001，59(3/4)：267-280.
[37]	朱万成，唐春安，杨天鸿，等. 岩石破裂过程分析用(RFPA2D)系统的细观单元本构关系及验证[J]. 岩石力学与工程学报，2003，22(1)：24-29.(ZHU Wancheng，TANG Chun?an，YANG Tianhong，Constitutive relationship of mesoscopic elements used in RFPA2D and its validations[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(1)：24-29.(in Chinese))
[38]	TANG C A，LIU H，LEE P K K，et al. Numerical studies of the influence of microstructure on rock failure in uniaxial compression — Part I：effect of heterogeneity[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(4)：555-569.
[40]	岳中琦，陈沙，郑宏，等. 岩土工程材料的数字图像有限元分析[J]. 岩石力学与工程学报，2004，23(6)：889-897.(YUE Zhongqi，CHEN Sha，ZHENG Hong，et al. Digital image proceeding based on finite element method for geomaterials[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(6)：889-897.(in Chinese))
[42]	于庆磊，唐春安，唐世斌. 基于数字图像的岩石非均匀性表征技术及初步应用[J]. 岩石力学与工程学报，2007，26(3)：551-559.(YU Qinglei，TANG Chun?an，TANG Shibin. Digital image based characterization method of rock?s heterogeneity and its primary application[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(3)：551-559.(in Chinese))
[45]	CONSTANTINIDES G，RAVI CHANDRAN K S，ULM F J，et al. Grid indentation analysis of composite microstructure and mechanics：Principles and validation[J]. Materials Science and Engineering：A，2006，430(1/2)：189-202.
[46]	LI L，WAN L，ZHOU Q. Crack propagation during Vickers indentation of zirconia ceramics[J]. Ceramics International，2020，46(13)：21 311-21 318.
[47]	PRATOMO F Y，WEI X，ZOU C，et al. Investigation of the shear failure of rock joints using the four-dimensional lattice spring model[J]. International Journal of Rock Mechanics and Mining Sciences，2022，152：105070.
[16]	张帆，胡维，郭翰群，等. 热处理后花岗岩纳米压痕试验研究[J]. 岩土力学，2018，39(增1)：235-243.(ZHANG Fan，HU Wei，GUO Hanqun，et al. Nanoindentation tests on granite after heat treatment[J]. Rock and Soil Mechanics，2018，39(Supp.1)：235-243. (in Chinese))
[25]	LI C，WANG D，KONG L，et al. Estimation of mechanical properties of the bakken shales through convolutional neural networks[J]. Rock Mechanics and Rock Engineering，2022，55(3)：1 213-1 225.
[34]	ZHAO G F，WEI X D，LIU F，et al. Non-parameterized numerical analysis using the distinct lattice spring model by implementing the Duncan-Chang model[J]. Rock Mechanics and Rock Engineering，2020，53(5)：2 365-2 380.
[43]	OLIVER W C，PHARR G M. Measurement of hardness and elastic modulus by instrumented indentation：Advances in understanding and refinements to methodology[J]. Journal of Materials Research，2004，19(1)：3-20.
[23]	LI S，REN J，KASYAP S S，et al. Mechanical，micro-structure and contour mapping analyses of highly-porous intermediate-texture analog rock from instrumented micro-indentation in conjunction with statistical/machine learning tools[J]. Geomechanics and Geophysics for Geo-Energy and Geo-Resources，2022，8(3)：2-25.
[30]	SHARIATI H，SAADATI M，WEDDFELT K，et al. A damage model for granite subjected to quasi‐static contact loading[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2021，46(2)：374-391.
[32]	LIU W，QIAN X，LI T，et al. Investigation of the tool-rock interaction using Drucker-Prager failure criterion[J]. Journal of Petroleum Science and Engineering，2019，173：269-278.
[39]	赵阳升，孟巧荣，康天合，等. 显微CT试验技术与花岗岩热破裂特征的细观研究[J]. 岩石力学与工程学报，2008，27(1)：28-34. (ZHAO Yangsheng，MENG Qiaorong，KANG Tianhe，et al. Micro-CT experimental technology and mecro-investigation on the thermal fracture characteristic of granite[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(1)：28-34.(in Chinese))
[41]	岳中琦. 基于数字图像的真实细观非均质岩土力学分析数值方法[J]. 地球物理学报，2022，65(1)：108-118.(YUE Zhongqi. Digital image based numerical methods for mechanical analyses of geomaterials with actual meso-heterogeneity[J]. Chinese Journal of Geophics，2022，65(1)：108-118.(in Chinese))