基于总安全系数法的喷锚组合支护承载能力试验研究

doi:10.13722/j.cnki.jrme.2023.1014

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (5050 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to validate the calculation model and safety factor calculation method for the combined spray-anchor support in the total safety factor method，this paper developed a large-scale tunnel structure model test system from the perspective of structural test，and carried out the loading test of the spray-anchor combined support structure under the unsupported tunnels and the different anchor spacing. The triaxial test of surrounding rock and fine sand material，and the tensile and pull-out test of anchor material were used to clarify the physical and mechanical parameters of each material in the model test，simulate the whole process of loading and damage of the spray-anchor combination support under different anchor spacing and unsupported tunnels，and monitor the stress and strain of the surrounding rock，anchor strain，inner and outer strain of the spray layer，and the displacement of the spray layer with the external load. Based on this，the design bearing capacity，ultimate bearing capacity，and deformation force characteristics of the unsupported tunnels and the combined spray-anchor support with different anchor spacing were analyzed and compared with the theoretical calculation results of the total safety factor method. The results show that：sprayed concrete and anchor can effectively carry the surrounding rock，improve the lateral limiting force of the surrounding rock，play the supporting role of the anchor rock bearing arch，and improve the deformation and bearing capacity of the surrounding rock；the bearing capacity and damage characteristics of the spray-anchor combination support obtained from the test are more in line with the results of theoretical calculations，which shows that the total safety factor method of spray-anchor combination support calculation method is reasonable and the method is on the safe side.

Key words： tunnel engineering spray-anchor combination support tunnel model test anchor rock bearing arch support structure bearing capacity the total safety factor method

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	XIAO Mingqing1
	2
	XU Chen1
	2
	CUI Lan3
	4
	SHENG Qian3
	4
	CHEN Jian3
	4
	XIE Biting1
	2
	WU Peng3
	4

Cite this article:

XIAO Mingqing1,2,XU Chen1, et al. Experimental study on bearing capacity of spray anchor combination support based on total safety factor method[J]. , 2024, 43(10): 2381-2395.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2023.1014 OR https://rockmech.whrsm.ac.cn/EN/Y2024/V43/I10/2381

[1] 肖明清. 隧道支护结构设计总安全系数法[M]. 北京：人民交通出版社，2020：100–101.(XIAO Mingqing. Design of railway tunnel support structure based on overall safety factor method[M]. Beijing：China Communication Press，2020：100–101.(in Chinese))
[2] SUN Z Y，ZHANG D L，FANG Q，et al. Analysis of the interaction between tunnel support and surrounding rock considering pre-reinforcement[J]. Tunnelling and Underground Space Technology，2023，141：105314.
[3] CUI L，SHEN Q，DONG Y K，et al. Two-stage analysis of interaction between strain-softening rock mass and liner for circular tunnels considering delayed installation of liner[J]. European Journal of Environmental and Civil Engineering，2022，26(4)：1 492–1 517.
[4] SHEN Q，ZHENG J J，CUI L，et al. A procedure for interaction between rock mass and liner for deep circular tunnel based on new solution of longitudinal displacement profile[J]. European Journal of Environmental and Civil Engineering，2022，26(1)：280–298.
[5] CUI L，SHENG Q，DONG Y K，et al. Semianalytical analysis of over excavation and critical support pressure for support design in TBM tunneling through squeezing rock condition[J]. International Journal of Geomechanics，2021，21(7)：04021097.
[6] 孙明社，吴旭，宋克志，等. 基于位移反分析方法的隧道衬砌最早施作时机研究[J]. 隧道建设：中英文，2023，43(12)：2 046– 2 055.(SUN Mingshe，WU Xu，SONG Kezhi，et al. Earliest lining construction time based on the displacement back analysis method[J]. Tunnel Construction，2023，43(12)：2 046–2 055.(in Chinese))
[7] 刘英棨，张谢东，陈卫东，等. 多位移反分析浅埋偏压隧道初期支护荷载分布研究[J]. 隧道建设，2016，36(7)：832–836.(LIU Yingqi，ZHANG Xiedong，CHEN Weidong，et al. Study of load distribution rules of primary support of shallow-covered unsymmetrically pressured tunnel by using multi-displacement back analysis method[J]. Tunnel Construction，2016，36(7)：832–836.(in Chinese))
[8] 时亚昕，王明年，李强. 单洞双层地铁隧道施工力学行为[J]. 岩石力学与工程学报，2006，25(增1)：2 985–2 990.(SHI Yaxin，WANG Mingnian，LI Qiang. Construction mechanical behavior of metro tunnel with single cavern and double-layer[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(Supp.1)：2 985–2 990.(in Chinese))
[9] ZHANG S M，ZHU Y Q，ZHAO Y C，et al. Comparative analysis of limit displacements for tunnels at the unlined and primary support stages[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(Supp.1)：774–779.
[10] 崔岚，郑俊杰，章荣军，等. 软弱破碎带隧道围岩变形及初期支护受力分析[J]. 华中科技大学学报：自然科学版，2012，40(11)：53–57.(CUI Lan，ZHENG Junjie，ZHANG Rongjun，et al. Analysis of deformation of the surrounding rock and preliminary support stress in tunnels through weak and cracked strata[J]. Journal of Huazhong University of Science and Technology：Natural Science，2012，40(11)：53–57.(in Chinese))
[11] 崔岚，张威，申俊敏，等. 深埋软岩隧道不同施工工法力学效应分析[J]. 土木工程与管理学报，2012，29(4)：36–40.(CUI Lan，ZHANG Wei，SHEN Junmin，et al. Mechanical response of deep-buried tunnels through soft and cracked rock mass under different excavation methods[J]. Journal of Civil Engineering and Management，2012，29(4)：36–40.(in Chinese))
[12] 杨林霖，杨文波，田浩晟，等. 考虑围岩短期蠕变效应的隧道双层初期支护变形控制研究[J]. 岩石力学与工程学报，2023，42(7)：1 731–1 742.(YANG Linlin，YANG Wenbo，TIAN Haosheng，et al. Study on deformation control of double-layered initial support in tunnels considering short-term creep effects of surrounding rock[J]. Chinese Journal of Rock Mechanics and Engineering，2023，42(7)：1 731–1 742.(in Chinese))
[13] 谢金池，寇昊，何川，等. 高地应力软岩大变形隧道洞型及双层初期支护支护时机研究[J]. 隧道建设(中英文)，2022，42(9)： 1 578–1 588.(XIE Jinchi，KOU Hao，HE Chuan，et al. Hole type and supporting time of double-layer primary support for large deformation soft rock tunnel with high insitu stress[J]. Tunnel Construction，2022，42(9)：1 578–1 588.(in Chinese))
[14] FANG Y，XU C，CUI G，et al. Scale model test of highway tunnel construction underlying mined-out thin coal seam[J]. Tunnelling and Underground Space Technology，2016，56(June)：105–116.
[15] 李荣锦，邹鑫，李荣建，等. 半嵌泥岩半覆黄土隧道模型试验及承载特性评价[J]. 岩土工程学报，2022，44(增1)：98–103.(LI Rongjin，ZOU Xin，LI Rongjian，et al. Model tests and bearing characteristics of tunnels under semi-inlaid mudstone and semi-loess[J]. Chinese Journal of Geotechnical Engineering，2022，44(Supp.1)：98–103.(in Chinese))
[16] 周阳，来弘鹏，王兴广，等. 长锚杆/锚索改善深埋大跨度隧道初支结构受力试验研究[J]. 岩土工程学报，2024，46(4)：853–863.(ZHOU Yang，LAI Hongpeng，WANG Xingguang，et al. Experimental study on improving the mechanical characteristics of initial supporting structure of deep buried large-span tunnel with long bolts or cables[J]. Chinese Journal of Geotechnical Engineering，2024，46(4)：853–863.(in Chinese))
[17] 王万平，李建斐，晏鹏博，等. 基于主动支护的木寨岭隧道高地应力软岩大变形预应力锚索支护设计实践[J]. 隧道建设(中英文)，2023，43(增1)：313–322.(WANG Wanping，LI Jianfei，YAN Pengbo，et al. Design practice of prestressed anchor cable support technology for soft rock with extremely high geostress and large deformation in Muzhailing tunnel[J]. Tunnel Construction，2023，43(Supp.1)：313–322.(in Chinese))
[18] 谢生荣，谢国强，何尚森，等. 深部软岩巷道锚喷注强化承压拱支护机制及其应用[J]. 煤炭学报，2014，39(3)：404–409.(LAI Hongpeng，LIU Miao，XIE Yongli，et al. Study of surrounding rock pressure characteristics of shallow excavation three-arch metro tunnel in loess region[J]. Journal of China Coal Society，2014，39(3)：404–409.(in Chinese))
[19] 肖明清，陈立保，徐晨，等. 高速铁路隧道支护参数的计算研究[J]. 隧道建设(中英文)，2018，38(3)：406–413.(XIAO Mingqing，CHEN Libao，XU Chen，et al. Calculation study of support parameters of high-speed railway tunnel[J]. Tunnel Construction，2018，38(3)：406–413.(in Chinese))
[20] 徐晨，肖明清，谢壁婷，等. 不同埋深条件下隧道围岩压力设计值通用算法[J]. 铁道工程学报，2023，40(6)：62–68.(XU Chen，XIAO Mingqing，XIE Biting. Universal calculation method for design values of tunnel surrounding rock pressure under different burial depth conditions[J]. Journal of Railway Engineering Society，2023，40(6)：62–68.(in Chinese))
[21] 肖明清，徐晨. 基于总安全系数法的隧道围岩压力代表值研究[J]. 铁道工程学报，2019，36(2)：64–69.(XIAO Mingqing，XU Chen. Research on the representative value of deep buried tunnel surrounding rock pressure based on total safety factor method[J]. Journal of Railway Engineering Society，2019，36(2)：64–69.(in Chinese))
[22] 肖明清，王少锋，陈立保，等. 基于荷载结构法的隧道初期支护设计方法研究[J]. 铁道工程学报，2018，35(4)：60–64.(XIAO Mingqing，WANG Shaofeng，CHEN Libao，et al. Research on the design method of primary support of tunnel based on the load-structure method[J]. Journal of Railway Engineering Society，2018，35(4)：60–64.(in Chinese))
[23] 肖明清. 复合式衬砌隧道的总安全系数设计方法探讨[J]. 铁道工程学报，2018，35(1)：84–88.(XIAO Mingqing. Discussion on design method of general safety factor of composite lining tunnel[J]. Journal of Railway Engineering Society，2018，35(1)：84–88.(in Chinese))
[24] 肖明清. 采用总安全系数法对几个隧道设计问题的探讨[J]. 铁道工程学报，2019，36(1)：65–69.(XIAO Mingqing. Exploration on the several problems of tunnel design with the total safety factor method[J]. Journal of Railway Engineering Society，2019，36(1)：65–69.(in Chinese))
[25] 肖明清. 采用总安全系数法对几个隧道设计问题的探讨[J]. 铁道工程学报，2019，36(1)：65–69.(XIAO Mingqing. Exploration on the several problems of tunnel design with the total safety factor method[J]. Journal of Railway Engineering Society，2019，36(1)：65–69.(in Chinese))
[26] 肖明清. 基于总安全系数法的铁路隧道支护结构设计[J]. 中国铁路，2020，(12)：82–88.(XIAO Mingqing. Design of railway tunnel support structure based on overall safety factor method[J]. China Railway，2020，(12)：82–88.(in Chinese))
[27] 中华人民共和国行业标准编写组. TB 10003—2016 铁路隧道设计规范[S]. 北京：中国铁道出版社，2017.(The Professional Standards Compilation Group of People?s Republic of China. TB 10003—2016 Code for design of railway tunnel[S]. Beijing：China Railway Publishing House，2017.(in Chinese))