页岩II型断裂韧性的各向异性特征研究

doi:10.3724/1000-6915.jrme.2025.0182

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (6874 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To enhance our understanding of the anisotropy in shear fracture resistance of shale, the mode-II fracture toughness of shale with different bedding orientations was measured using the double-edge notched Brazilian disc (DNBD) method. These tests were conducted based on theoretical analyses of shear crack initiation. The initiation and propagation of fractures generated in DNBD specimens were determined, and the mechanism for testing the mode-II fracture toughness of rocks using the DNBD method was investigated. The results indicated that: (1) the high compressive T-stress in DNBD specimens significantly reduces the circumferential stress at the tips of pre-cut notches, thereby inhibiting the competitive initiation of tensile cracks and facilitating self-similar shear fractures. (2) The mode-II fracture toughness of shale increases approximately linearly with the bedding angle, displaying marked anisotropy. The fracture toughness is minimal at the bedding plane, maximal in the matrix, and nearly equal in the direction normal to the bedding compared to the matrix. As an intrinsic material property, the true mode-II fracture toughness, in the absence of normal compressive stress, is considerably lower than the apparent (experimental) value. Moreover, the true mode-II fracture toughness remains relatively constant even when wing-shaped tensile cracks initiate competitively. (3) Similar fracture propagation patterns were observed in DNBD specimens with varying bedding orientations. The findings revealed that complex fracture processes, including the competitive initiation and subcritical propagation of wing-shaped and en-echelon fractures, occurred prior to the shear fracture of the rock bridge. (4) The subcritical propagation of wing-shaped tensile cracks following competitive initiation has been identified as the primary mechanism driving self-similar shear fractures along pre-cut notches in DNBD specimens. This understanding elucidates the mechanism for measuring mode-II fracture toughness in rocks using the DNBD method.

Key words： rock mechanics shale mode-II fracture toughness double-edge notched Brazilian disk (DNBD) method shear fracture anisotropy

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HENG Shuai1
	2
	CAO Duanwei1
	CHEN Yu1
	LI Xianzhong1
	DONG Zhuo1

Cite this article:

HENG Shuai1,2,CAO Duanwei1, et al. Anisotropy in mode-II fracture toughness of shale[J]. , 2025, 44(10): 2622-2637.

URL:

https://rockmech.whrsm.ac.cn/EN/10.3724/1000-6915.jrme.2025.0182 OR https://rockmech.whrsm.ac.cn/EN/Y2025/V44/I10/2622

[1]	MAYERHOFER M J，LOLON E，WARPINSKI N R，et al. What is stimulated reservoir volume[J]. SPE Production and Operations，2010，25(1)：89-98.
[2]	CIPOLLA C L，WARPINSKI N R，MAYERHOFER M，et al. The relationship between fracture complexity，reservoir properties，and fracture- treatment design[J]. SPE Production and Operations，2010，25(4)：438-452.
[3]	GUO T，ZHANG S，GE H，et al. A new method for evaluation of fracture network formation capacity of rock[J]. Fuel，2015，140：778-787.
[4]	吴奇，胥云，张守良，等. 非常规油气藏体积改造技术核心理论与优化设计关键[J]. 石油学报，2014，35(4)：706-714.(WU Qi，XU Yun，ZHANG Shouliang，et al. The core theories and key optimization designs of volume stimulation technology for unconventional reservoirs[J]. Acta Petrolei Sinica，2014，35(4)：706-714.(in Chinese))
[5]	张明明. T应力对岩石断裂韧性及裂纹起裂的影响[硕士学位论文][D]. 成都：西南石油大学，2017.(ZHANG Mingming. The influence of T-stress on rock fracture toughness and crack initial angle[M. S. Thesis][D]. Chengdu：Southwest Petroleum University，2017.(in Chinese))
[6]	ALIHA M R M，AYATOLLAHI M R，SMITH D J，et al. Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading[J]. Engineering Fracture Mechanics，2010，77(11)：2 200-2 212.
[7]	REN L，XIE L Z，XIE H P，et al. Mixed-mode fracture behavior and related surface topography feature of a typical sandstone[J]. Rock Mechanics and Rock Engineering，2016，49：3 137-3 153.
[8]	ZHENG K，WANG C，ZHAO Y，et al. Theoretical and experimental researches on fracture toughness for bedded shale using the centrally cracked Brazilian disk method with acoustic emission monitoring[J]. Theoretical and Applied Fracture Mechanics，2023，124：103784.
[9]	HUA W，LI J，ZHU Z，et al. Experimental study on mode I and mode II fracture properties of heated sandstone after two different cooling treatments[J]. Geomechanics for Energy and the Environment，2023，34：100448.
[10]	LIU J，QIAO L，LI Y，et al. Experimental study on the quasi-static loading rate dependency of mixed-mode I/II fractures for marble rocks[J]. Theoretical and Applied Fracture Mechanics，2022，121：103431.
[11]	纪维伟. 基于数字图像实验的岩石类材料纯剪裂缝断裂机理研究[博士学位论文][D]. 北京：中国石油大学(北京)，2023.(JI Weiwei. Fracture mechanism of pure shear fracture in rock-type materials base on digital Image experiments[Ph. D Thesis][D]. Beijing：China University of Petroleum(Beijing)，2023.(in Chinese))
[12]	LUO Y，REN L，XIE L Z，et al. Fracture behavior investigation of a typical sandstone under mixed-mode I/II loading using the notched deep beam bending method[J]. Rock Mechanics and Rock Engineering，2017，50：1 987-2 005.
[13]	WU Y，YIN T，ZHUANG D，et al. Initial and unstable fracture toughness of quartz-diorite rock under mixed mode I/II loading：Experimental and numerical investigation[J]. Theoretical and Applied Fracture Mechanics，2023，127：104079.
[14]	WEN X，FENG L，YIN G，et al. Relationship between low-temperature KIc and KIIc values of bitumen with different performance grades and comparison with naturally solid materials[J]. Theoretical and Applied Fracture Mechanics，2022，117：103169.
[15]	BACKERS T，STEPHANSSON O. ISRM suggested method for the determination of mode II fracture toughness[C]// The ISRM Suggested Methods for Rock Characterization，Testing and Monitoring：2007-2014. Cham：Springer International Publishing，2014：45-56.
[16]	BACKERS T，STEPHANSSON O，RYBACKI E. Rock fracture toughness testing in Mode II—punch-through shear test[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(6)：755-769.
[17]	卓莉，裴建良，刘怀忠，等. Ⅱ型断裂韧度测试功能开发与试验分析[J]. 实验力学，2024，39(1)：34-42.(ZHUO Li，PEI Jianliang，LIU Huaizhong，et al. Test function development and experimental analysis of mode II fracture toughness[J]. Journal of Experimental Mechanics，2024，39(1)：34-42.(in Chinese))
[18]	WU H，KEMENY J，WU S. Experimental and numerical investigation of the punch-through shear test for mode II fracture toughness determination in rock[J]. Engineering Fracture Mechanics，2017，184：59-74.
[19]	ALNEASAN M，ALZO'UBI A K，OKASHA N. A comprehensive study for the effect of sample geometry and lateral pressure on shear fractures using the short core in compression(SCC) method[J]. European Journal of Mechanics-A/Solids，2023，100：104988.
[20]	ZHANG C，LI D，WANG C，et al. Effect of confining pressure on shear fracture behavior and surface morphology of granite by the short core in compression test[J]. Theoretical and Applied Fracture Mechanics，2022，121：103506.
[21]	ZHAN Z，YU Y，YAO W，et al. Validity for measuring mode II fracture toughness using the short beam in compression method[J]. Engineering Fracture Mechanics，2024，308：110381.
[22]	SUN D，RAO Q，WANG S，et al. Shear fracture(Mode II) toughness measurement of anisotropic rock[J]. Theoretical and Applied Fracture Mechanics，2021，115：103043.
[23]	RAO Q，SUN Z，STEPHANSSON O，et al. Shear fracture(Mode II) of brittle rock[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(3)：355-375.
[24]	CAO R，WANG C，HU T，et al. Experimental investigation of plane shear fracture characteristics of sandstone after cyclic freeze-thaw treatments[J]. Theoretical and Applied Fracture Mechanics，2022，118：103214.
[25]	BAHRAMI B，NEJATI M，AYATOLLAHI M R，et al. Theory and experiment on true mode II fracturing of rocks[J]. Engineering Fracture Mechanics，2020，240：107314.
[26]	NEJATI M，BAHRAMI B，AYATOLLAHI M R，et al. On the anisotropy of shear fracture toughness in rocks[J]. Theoretical and Applied Fracture Mechanics，2021，113：102946.
[27]	HUG L，POTTEN M，STOCKINGER G，et al. A three-field phase-field model for mixed-mode fracture in rock based on experimental determination of the mode II fracture toughness[J]. Engineering with Computers，2022，38(6)：5 563-5 581.
[28]	李世愚，和泰名，尹祥础. 岩石断裂力学[M]. 北京：科学出版社，2016：322-329.(LI Shiyu，HE Taiming，YIN Xiangchu. Rock fracture mechanics[M]. Beijing：Science Press，2016：322-329.(in Chinese))
[29]	HENG S，LI X，LIU X，et al. Experimental study on the mechanical properties of bedding planes in shale[J]. Journal of Natural Gas Science and Engineering，2020，76：103161.
[30]	FAN Z D，REN L，XIE H P，et al. 3D anisotropy in shear failure of a typical shale[J]. Petroleum Science，2023，20(1)：212-229.
[31]	衡帅，杨春和，张保平，等. 页岩各向异性特征的试验研究[J]. 岩土力学，2015，36(3)：609-616.(HENG Shuai，YANG Chunhe，ZHANG Baoping，et al. Experimental research on anisotropic properties of shale[J]. Rock and Soil Mechanics，2015，36(3)：609-616.(in Chinese))
[32]	何柏，谢凌志，李凤霞，等. 龙马溪页岩各向异性变形破坏特征及其机理研究[J]. 中国科学：物理学力学天文学，2017，47(11)：1-12.(HE Bo，XIE Lingzhi，LI Fengxia，et al. Anisotropic mechanism and characteristics of deformation and failure of Longmaxi shale[J]. Scientia Sinica Physica，Mechanica and Astronomica，2017，47(11)：1-12.(in Chinese))
[33]	LIN Q，WANG S，PAN P Z，et al. Fracture initiation under pure shear revisited：Remarks on the mode II fracture in quasi-brittle materials[J]. Theoretical and Applied Fracture Mechanics，2020，109：102700.
[34]	HENG S，CAO D，LI X，et al. Experimental study on the anisotropic fracture characteristics of shale under different loading modes[J]. Engineering Fracture Mechanics，2025，324：111270.
[35]	张晨曦，李地元，杨博. 岩石材料II型断裂理论与试验测试技术进展[J]. 工程力学，2023，40(8)：19-36.(ZHANG Chenxi，LI Diyuan，YANG Bo. Advances in theory and experimental testing techniques of mode II fracture for rock materials[J]. Engineering Mechanics，2023，40(8)：19-36.(in Chinese))
[36]	FAN Z D，XIE H P，ZHANG R，et al. Characterization of anisotropic mode II fracture behaviors of a typical layered rock combining AE and DIC techniques[J]. Engineering Fracture Mechanics，2022，271：108599.
[37]	ZHENG K，WANG C，ZHAO Y，et al. A dominant frequency-based hierarchical clustering method for evaluating the mode-II fracture mechanisms of shale using the acoustic emission technique[J]. Theoretical and Applied Fracture Mechanics，2024，134：104644.
[38]	衡帅，李贤忠，刘晓，等. 直剪条件下页岩裂缝扩展演化机制研究[J]. 岩石力学与工程学报，2019，38(12)：2 438-2 450.(HENG Shuai，LI Xianzhong，LIU Xiao，et al. Study on the propagation mechanisms of shale fractures under direct shear conditions[J]. Chinese Journal of Rock Mechanics and Engineering，2019，38(12)：2 438-2 450.(in Chinese))