真三轴应力状态下岛礁珊瑚砂力学特性研究

doi:10.3724/1000-6915.jrme.2025.0236

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1440 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Grasping the strength characteristics of soils under three-dimensional stress states is crucial for assessing the stability of foundations under complex stress conditions. In this paper, true triaxial shear tests under different intermediate principal stress coefficients were carried out on coral sand to investigate the influence laws of intermediate principal stress on the stress-strain relationship, peak-state large principal strain, peak-state friction angle, and stress-dilation relationship of coral sand. The applicability of different strength criteria in describing the variation in the true triaxial shear strength of coral sand is also examined. The results show that under the true triaxial shearing conditions, the stress-strain curves of coral sands are categorized into strain-softening type. The peak-state shear strength of the coral sand increases significantly with the increase of the intermediate principal stress coefficient. At the same time, the deformation in the direction of the intermediate principal stress transitions from expansion to compression behavior with the increase of the intermediate principal stress coefficient. In addition, the peak-state dilation rate of coral sand significantly increases with intermediate principal stress coefficient. By comparison, it is noted that the Lade-Duncan and Matsuoka-Nakai strength criterion describes the three-dimensional strength properties of coral sand with better applicability.

Key words： soil mechanics coral sand true triaxial test intermediate principal stress coefficient deformation strength criterion

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Wujie1
	WEN Liwei1
	HUANG Jinsheng2
	WU Yang1
	LIU Dongying1
	CUI Jie1
	LYU Haibo3
	ZENG Zhaotian4

Cite this article:

LIU Wujie1,WEN Liwei1,HUANG Jinsheng2, et al. Mechanical characteristics of coral sand under true triaxial stress state[J]. , 2025, 44(10): 2814-2824.

URL:

https://rockmech.whrsm.ac.cn/EN/10.3724/1000-6915.jrme.2025.0236 OR https://rockmech.whrsm.ac.cn/EN/Y2025/V44/I10/2814

[1]	孙吉主，汪稔. 钙质砂的颗粒破碎和剪胀特性的围压效应[J]. 岩石力学与工程学报，2004，23(4)：641-644.(SUN Jizhu，WANG Ren. Influence of confining pressure on particle breakage and shear expansion of calcareous sand[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(4)：641-644.(in Chinese))
[2]	张家铭，张凌，蒋国盛，等. 剪切作用下钙质砂颗粒破碎试验研究[J]. 岩土力学，2008，29(10)：2 789-2 793.(ZHANG Jiaming，ZHANG Ling，JIANG Guosheng，et al. Research on particle crushing of calcareous sands under triaxial shear[J]. Rock and Soil Mechanics，2008，29(10)：2 789-2 793.(in Chinese))
[3]	张坤勇，殷宗泽，徐志伟，等. 国内真三轴试验仪的发展及应用[J]. 岩土工程技术，2003，(5)：289-293.(ZHANG Kunyong，YIN Zongze，XU Zhiwei，et al. Development and application of true triaxial tester in China[J]. Geotechnical Engineering Technology，2003，(5)：289-293.(in Chinese))
[4]	ABELEV A V，LADE P V. Effects of cross anisotropy on three-dimensional behavior of sand. I：stress-strain behavior and shear banding[J]. Journal of Engineering Mechanics，2003，129(2)：160-166.
[5]	ALSHIBLI K A，WILLIAMS H S. A true triaxial apparatus for soil testing with mixed boundary conditions[J]. Geotechnical Testing Journal，2005，28(6)：534-543.
[6]	LADE P V，DUNCAN J M. Cubical triaxial tests on cohesionless soil[J]. Journal of the Soil Mechanics and Foundations Division，1973，99(10)：793-812.
[7]	CHU J，LO S C R，LEE I K. Strain softening and shear band formation of sand in multi-axial testing[J]. Géotechnique，1996，46(1)：63-82.
[8]	LADE P V，MUSANTE H M. Three-dimensional behavior of remolded clay[J]. Journal of the Geotechnical Engineering Division，1978，104(2)：193-209.
[9]	MATSUOKA H，SUN D，KOGANE A，et al. Stress-strain behaviour of unsaturated soil in true triaxial tests[J]. Canadian Geotechnical Journal，2002，39(3)：608-619.
[10]	WANG Q，LADE P V. Shear banding in true triaxial tests and its effect on failure in sand[J]. Journal of Engineering Mechanics，2001，127(8)：754-761.
[11]	徐志伟，殷宗泽. 粉砂侧向变形特性的真三轴试验研究[J]. 岩石力学与工程学报，2000，19(5)：626-629.(XU Zhiwei，YIN Zongze. Study on deformation characteristic of silt by true triaxial test[J]. Chinese Journal of Rock Mechanics and Engineering，2000，19(5)：626-629.(in Chinese))
[12]	SUN D A，HUANG W，YAO Y. An experimental study of failure and softening in sand under three-dimensional stress condition[J]. Granular Matter，2008，10(3)：187-195.
[13]	施维成，朱俊高，刘汉龙. 中主应力对砾石料变形和强度的影响[J]. 岩土工程学报，2008，30(10)：1 449-1 453.(SHI Weicheng，ZHU Jungao，LIU Hanlong. Influence of intermediate principal stress on deformation and strength of gravel[J]. Chinese Journal of Geotechnical Engineering，2008，30(10)：1 449-1 453.(in Chinese))
[14]	扈萍，黄茂松，马少坤，等. 粉细砂的真三轴试验与强度特性[J]. 岩土力学，2011，32(2)：465-470.(HU Ping，HUANG Maosong，MA Shaokun，et al. True triaxial tests and strength characteristics of silty sand[J]. Rock and Soil Mechanics，2011，32(2)：465-470.(in Chinese))
[15]	邵生俊，陈菲，代亚锋，等. 结构性黄土的剪切带及强度特性的真三轴试验研究[J]. 岩土力学，2015，36(增1)：66-70.(SHAO Shengjun，CHEN Fei，DAI Yafeng，et al. Shear band mechanism and strength characteristics of structural loess tested by true triaxial apparatus[J]. Rock and Soil Mechanics，2015，36(Supp.1)：66-70.(in Chinese))
[16]	吴杨，容浩俊，王金莲，等. 颗粒形状和中主应力对砂土力学特性耦合影响的真三轴试验研究[J]. 岩石力学与工程学报，2023，42(2)：497-507.(WU Yang，RONG Haojun，WANG Jinlian，et al. A true triaxial experimental study on the coupled effect of particle shape and intermediate principal stress on the mechanical properties of sand[J]. Chinese Journal of Rock Mechanics and Engineering，2023，42(2)：497-507.(in Chinese))
[17]	马成昊，朱长歧，瞿茹，等. 中国南海珊瑚砂的多尺度颗粒形貌特征分析[J]. 岩土力学，2023，44(增1)：117-126.(MA Chenghao，ZHU Changqi，QU Ru，et al. Multi-scale particle morphology analysis of coral sand in the South China Sea[J]. Rock and Soil Mechanics，2023，44(Supp.1)：117-126.(in Chinese))
[18]	吴杨，吴毅航，马林建，等. 南海岛礁珊瑚砂砾混合料动力特性试验研究[J]. 岩土工程学报，2024，46(1)：63-71.(WU Yang，WU Yihang，MA Linjian，et al. Experimental study on dynamic characteristics of calcareous sand-gravel mixtures from islands in the South China Sea[J]. Chinese Journal of Geotechnical Engineering，2024，46(1)：63-71.(in Chinese))
[19]	李能，吴杨，周福霖，等. 岛礁吹填珊瑚砂不排水单调和循环剪切特性试验[J]. 中国公路学报，2023，36(8)：152-161.(LI Neng，WU Yang，ZHOU Fulin，et al. Experiment of undrained monotonic and cyclic shear characteristics of hydraulic filled coral sand from reef island[J]. China Journal of Highway and Transport，2023，36(8)：152-161.(in Chinese))
[20]	胡丰慧，方祥位，申春妮，等. 真三轴条件下珊瑚砂颗粒破碎、强度和剪胀性研究[J]. 岩土力学，2025，46(7)：2 147-2 159.(HU Fenghui，FANG Xiangwei，SHEN Chunni，et al. Experiment on particle breakage, strength, and dilatancy of coral sand under true triaxial conditions[J]. Rock and Soil Mechanics，2025，46(7)：2 147-2 159.(in Chinese))
[21]	中华人民共和国国家标准编写组. GB/T 50123—2019土工试验方法标准[S]. 北京：中国计划出版社，2019.(The National Standards Compilation Group of People?s Republic of China. GB/T 50123—2019 Standard for geotechnical testing methods[S]. Beijing：China Planning Press，2019.(in Chinese))
[22]	WANG X，CUI J，WU Y，et al. Mechanical properties of calcareous silts in a hydraulic fill island-reef[J]. Marine Georesources and Geotechnology，2021，39(1)：1-14.
[23]	吴杨，崔杰，李能，等. 岛礁吹填珊瑚砂力学行为与颗粒破碎特性试验研究[J]. 岩土力学，2020，41(10)：3 181-3 191.(WU Yang，CUI Jie，LI Neng，et al. Experimental study on the mechanical behavior and particle breakage characteristics of hydraulic filled coral sand on a coral reef island in the South China Sea[J]. Rock and Soil Mechanics，2020，41(10)：3 181-3 191.(in Chinese))
[24]	LIU Y，ZHANG D，WU S C，et al. DEM investigation on the evolution of fabric under true triaxial conditions in granular materials[J]. International Journal of Geomechanics，2020，20(8)：4020110.
[25]	DOROSTKAR O，MIRGHASEMI A A. On the micromechanics of true triaxial test，insights from 3D DEM study[J]. Iranian Journal of Science and Technology，Transactions of Civil Engineering，2018，42(3)：259-273.
[26]	LADE P V，WANG Q. Analysis of shear banding in true triaxial tests on sand[J]. Journal of Engineering Mechanics，2001，127(8)：762-768.
[27]	王泽驰，邵帅，魏军政，等. 考虑中主应力变化的原状黄土变形特性研究[J]. 岩土力学，2023，44(3)：854-860.(WANG Zechi，SHAO Shuai，WEI Junzheng，et al. Deformation characteristics of undisturbed loess considering the change of intermediate principal stress[J]. Rock and Soil Mechanics，2023，44(3)：854-860.(in Chinese))
[28]	RODRIGUEZ N M，LADE P V. True triaxial tests on cross-anisotropic deposits of fine nevada sand[J]. International Journal of Geomechanics，2013，13(6)：779-793.
[29]	ALSHIBLI K A，BATISTE S N，STURE S. Strain Localization in Sand：Plane Strain versus Triaxial Compression[J]. Journal of Geotechnical and Geoenvironmental Engineering，2003，129(6)：483-494.
[30]	ZHU M Y，GONG G B，XIA J，et al. DEM investigation of strength and critical state behaviours of granular materials under true triaxial loadings[J]. Particuology，2024，85：198-212.
[31]	江洎洧，潘家军，程展林，等. 基于大型真三轴试验的粗粒料强度特性研究[J]. 岩土工程学报，2018，40(增2)：32-36.(JIANG Jiwei，PAN Jiajun，CHENG Zhanlin，et al. Large-scale true triaxial tests on strength characteristics of coarse-grained soils[J]. Chinese Journal of Geotechnical Engineering，2018，40(Supp.2)：32-36.(in Chinese))
[32]	BEEN K，JEFFERIES M. Stress dilatancy in very loose sand[J]. Canadian Geotechnical Journal，2011，41：972-989.
[33]	YOSHIMOTO N，WU Y，HYODO M，et al. Effect of relative density on the shear behaviour of granulated coal ash[J]. Geomechanics and Engineering，2016，10：207-224.
[34]	WU Y，LI N，WANG X Z，et al. Experimental investigation on mechanical behavior and particle crushing of calcareous sand retrieved from South China Sea[J]. Engineering Geology，2021，280：105932.
[35]	郑颖人，孔亮. 岩土塑性力学[M]. 北京：中国建筑工业出版社，2010：250-276.(ZHENG Yingren，KONG Liang. Rock and soil plastic mechanics[M]. Beijing：China Building and Construction Press，2010：250-276.(in Chinese))
[36]	沈珠江. 理论土力学[M]. 北京：中国水利水电出版社，2000：69-70.(SHEN Zhujiang. Theoretical soil mechanics[M]. Beijing：China Water Resources and Hydropower Press，2000：69-70.(in Chinese))
[37]	杨雪强，朱志政，何世秀，等. 对Lade-Duncan，Matsuoka-Nakai和Ottosen等破坏准则的认识[J]. 岩土工程学报，2006，28(3)：337-342.(YANG Xueqiang，ZHU Zhizheng，HE Shixiu，et al. Researches on failure criteria of Lade-Duncan，Matsuoka-Nakai and Ottosen[J]. Chinese Journal of Geotechnical Engineering，2006，28(3)：337-342.(in Chinese))
[38]	WU S C，ZHANG S H，GUO C，et al. A generalized nonlinear failure criterion for frictional materials[J]. Acta Geotechnica：An International journal for Geoengineering，2017，12(6)：1 353-1 371.
[39]	杨雪强，区兆光，冯颖匡，等. Matsuoka-Nakai与Lade-Duncan两破坏准则之间的相互关系[J]. 应用力学学报，2008，25(3)：475-479.(YANG Xueqiang，QU Zhaoguang，FENG Yingkuang，et al. Relationships between Matsuoka-Nakai and Lade-Duncan failure criteria[J]. Chinese Journal of Applied Mechanics，2008，25(3)：475-479.(in Chinese))