|
|
|
| ENGINEERING ROCK MASS CLASSIFICATION METHOD BASED ON ROCK MASS QUALITY INDEX BQ FOR ROCK SLOPE |
| WU Aiqing，WANG Bin |
| (Key Laboratory of Geotechnical Mechanics and Engineering of Ministry of Water Resources，Yangtze River Scientific Research Institute，Wuhan，Hubei 430010，China) |
|
|
|
|
Abstract The engineering classification in rock slopes is not included in the current standard of engineering classification of rock masses(GB50218—94). This paper presents the engineering classification method for rock slopes(BQ-R Slope) based on the quality index of rock mass BQ. In this method，several modified factors are employed as to correct rock mass basic quality，and the engineering rock mass classifications for rock slopes are determined by the modified rock mass quality，and the evaluation for stand-up time of rock slope in correspondence with each class of rock mass is further proposed. The employed factors consist of the type and the persistence of major structural planes，the relationship between orientations of structural planes in rock mass and rock slope surface and the groundwater conditions in rock slope. The presented method is verified through applications to four rock slope projects and ten slope sections in total. It is found that the engineering classification and the corresponding evaluation results of each slope section with the method proposed are generally in good agreement with the practical situation. This indicates that the presented method for engineering rock mass classification of rock slopes based on BQ index is appropriate.
|
|
Received: 03 December 2013
|
|
|
|
| [1] BIENIAWSKI Z T. Engineering rock mass classifications，a complete manual for engineers and geologists in mining，civil and petroleum engineering[M]. New York：A Wiley-Interscience Publication，1989：30–31.
[2] DEERE D C，HENDRON A J，PATTON F D，et al. Design of surface and near surface construction in rock[C]// Proceedings of the 8th U.S，Symp. Rock Mech.. New York：[s.n.]，1967：237–302.
[3] BARTON N R，LIEN R，LUNDE J. Engineering classification of rock masses for the design of tunnel support[J]. Rock Mechanics，1974，6(4)：189–239.
[4] BIENIAWSKI Z T. Engineering classification of jointed rock masses[J]. Trans. S. Afr. Inst. Civ. Eng.，1973，15(12)：335–344.
[5] 中华人民共和国国家标准编写组. GB 50487—2008 水利水电工程地质勘察规范[S]. 北京：中国计划出版社，2009：123–128.(The National Standards Compilation Group of People?s Republic of China. GB50487—2008 Code for engineering geological investigation of water resources and hydropower[S]. Beijing：China Planning Press，2009：123–128.(in Chinese))
[6] 王石春，侯发亮，李苍松. 隧道工程岩体分级[M]. 成都：西南交通大学出版社，2007：100–115.(WANG Shichun，HOU Faliang，LI Cangsong. Rock mass classification in tunneling engineering[M]. Chengdu：Southwest Jiaotong University Press，2007：100–115.(in Chinese))
[7] ROMANA M R. New adjustment ratings for application of Biemiawski classification to slopes[C]// Proc. Int. Symp. Rock Mech. Excav. Min. Civ. Works. Mexico：[s.n.]，1985：59–68.
[8] ROMANA M R. A geomechanical classification for slopes：slope mass rating[J]. Comprehensive Rock Engineering，1993，(3)：575–599.
[9] 孙东亚，陈祖煜，杜伯辉，等. 边坡稳定评价方法RMR-SMR体系及其修正[J]. 岩石力学与工程学报，1997，16(4)：297–304.(SUN Dongya，CHEN Zuyu，DU Bohui，et al. Modifications to the RMR-SRM system for slope stability evaluation[J]. Chinese Journal of Rock Mechanics and Engineering，1997，16(4)：297–304.(in Chinese))
[10] 中华人民共和国行业标准编写组. DL/T5337—2006 水电水利工程边坡工程技术地质勘查技术规程[S]. 北京：中国电力出版社，2006.(The Professional Standards Compilation Group of People?s Republic of China. DL/T5337—2006 Technical code for engineering geological investigation of slope for hydropower and water resources project[S]. Beijing：China Electric Power Press，2006.(in Chinese))
[11] 黄昌乾，范建军. 边坡岩体质量分类的SMR法及其应用实例[J].岩土工程技术，1998，(1)：7–15.(HUANG Changqian，FAN Jianjun. The SRM method and case history of slope rock mass quality classification[J]. Geotechnical Engineering Technique，1998，(1)：7–15.(in Chinese))
[12] 万国荣，石豫川，王 哲，等. SMR法在公路边坡稳定性分析中的应用[J]. 公路交通技术，2004，(2)：7–10.(WAN Guorong，SHI Yuchuan，WANG Zhe，et al. Application of SMR method to highway slope stability classification[J]. Technology of Highway and Transport，2004，(2)：7–10.(in Chinese))
[13] 石豫川，王 哲，万国荣，等. 山区高等级公路边坡岩体分级研究[J]. 岩石力学与工程学报，2005，24(6)：939–944.(SHI Yuchuan，WANG Zhe，WAN Guorong，et al. Study of mountain highway slope mass rating[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(6)：939–944.(in Chinese))
[14] 中华人民共和国国家标准编写组. GB50330—2002 建筑边坡工程技术规范[S]. 北京：中国建筑工业出版社，2002.(The National Standards Compilation Group of People?s Republic of China. GB50330—2002 Technical code for building slope engineering[S]. Beijing：China Architecture and Building Press，2002.(in Chinese))
[15] 董学晟. 《工程岩体分级标准》的研究[J]. 长江科学院院报，1992，9(4)：1–9.(DONG Xuesheng. Study of the Standard for Engineering Classification of Rock Masses[J]. Journal of Yangtze River Scientific Research Institute，1992，9(4)：1–9.(in Chinese))
[16] 中华人民共和国国家标准编写组. GB50218–94工程岩体分级标准[S]. 北京：中国计划出版社，1995.(The National Standards Compilation Group of People?s Republic of China. GB50218—94 Standard for engineering classification of rock masses[S]. Beijing：China Planning Press，1995.(in Chinese))
[17] 邬爱清，柳赋铮. 国标《工程岩体分级标准》的应用与进展[J]. 岩石力学与工程学报，2012，31(8)：1 513–1 523.(WU Aiqing，LIU Fuzheng. Advancement and application of the standard of engineering classification of rock masses[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(8)：1 513–1 523.(in Chinese))
[18] 中华人民共和国国家标准编写组. GB50218 工程岩体分级标准(报批稿)[S]. 武汉：长江科学院，2013.(The National Standards Compilation Group of People?s Republic of China. GB50218 Standard for engineering classification of rock masses(modified version for authorized approval)[S]. Wuhan：Yangtze River Scientific Research Institute，2013.(in Chinese)) |
|
|
|
2014, Vol. 33 
