1∶1站立式大断面异形盾构管片力学试验系统的研发与应用

doi:10.13722/j.cnki.jrme.2017.0379

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1229 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要异形盾构管片由于特殊的断面型式，在应用到实际工程前须对其承载能力、力学特征和破坏模式进行研究。提出一种1∶1站立式原型异形盾构管片力学加载方法，构建可重构式的钢结构加载和数据采集平台以及基于PLC闭环控制理论的千斤顶液压控制系统。基于该试验系统，研究自重状态和覆土状态下异形管片结构内力和形变特征，揭示浅埋条件下管片结构自重对异形管片内力和形变的影响规律，获得所研究的异形盾构管片极限埋深为18.5 m，并通过对管片结构内外弧面裂缝分布规律的分析，发现了异形管片明显的弯矩传递现象。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张子新1
	朱叶艇1
	2
	朱雁飞2
	黄昕1
	庄欠伟2

关键词 ：隧道工程, 异形盾构, 原型试验, 三维激光扫描仪, 裂缝, 弯矩传递

Abstract：The bearing capacity，mechanical characteristics and damage mode of the special-shaped shield lining should be explored before application because of its special cross section. A 1∶1‘standing’prototype loading method for special-shaped segmental lining was suggested，and a‘standing’reconfigurable loading and data acquisition platform was developed with a hydraulic control system based on the closed-loop control theory of PLC. The internal force and deformation characteristics of the special-shaped shield lining structure under dead weight and overburden condition were analyzed respectively. The substantial influence of the structural self-weight on the internal force and deformation of the segmental lining under shallow overburden conditions was discovered. The limit burying depth of the lining structure was determined to be 18.5 m，and the analysis of the distribution of the cracks on the inner and outer surfaces of the segmental lining revealed the phenomenon of bending moment transfer.

Key words： tunneling engineering special-shaped shield prototype test 3D laser scanner crack bending moment transfer

引用本文:

张子新1，朱叶艇1，2，朱雁飞2，黄昕1，庄欠伟2. 1∶1站立式大断面异形盾构管片力学试验系统的研发与应用[J]. 岩石力学与工程学报, 2017, 36(12): 2895-2905.
ZHANG Zixin1，ZHU Yeting1，2，ZHU Yanfei2，HUANG Xin1，ZHUANG Qianwei2. Development and application of a 1∶1 mechanical test system for special-shaped shield lining with a large cross-section#br#. , 2017, 36(12): 2895-2905.

链接本文:

http://www.rockmech.org/CN/10.13722/j.cnki.jrme.2017.0379 或 http://www.rockmech.org/CN/Y2017/V36/I12/2895

[3]	MOLINS C，ARNAU O. Experimental and analytical study of the structural response of segmental tunnel linings based on an in situ loading test： Part 1： Test configuration and execution[J]. Tunnelling and Underground Space Technology，2011，26(6)：764-777.
[5]	NAKAMURA H，KUBOTA T，FURUKAWA M，et al. Unified construction of running track tunnel and crossover tunnel for subway by rectangular shape double track cross-section shield machine[J]. Tunnelling and Underground Space Technology，2003，18(2)：253-262. " target="_blank">
[12]	BOWLES J E. Foundation analysis and design[M]. New York：McGraw-Hill，1988：855-868. " target="_blank">
[2]	NISHIKAWA K. Development of a prestressed and precast concrete segmental lining[J]. Tunnelling and Underground Space Technology，2003，18(2)：243-251. " target="_blank">
[1]	唐志成，何川，林刚. 地铁盾构隧道管片结构力学行为模型试验研究[J]. 岩土工学报，2005，27(1)：85-89.(TANG Zhicheng，HE Chuan，LIN Gang. Study on mechanical behavior of segment of shield tunnel of metro with model test[J]. Chinese Journal of Geotechnical Engineering，2005，27(1)：85-89.(in Chinese))
[6]	LUTTIKHOLT A. Ultimate limit state analysis of a segmented tunnel lining[M. S. Thesis][D]. Delft：Delft University of Technology，2007. " target="_blank">
[7]	何川，封坤，苏宗贤. 大断面水下盾构隧道原型结构加载试验系统的研发与应用[J]. 岩石力学与工程学报，2011，30(2)：254-266.(HE Chuan，FENG Kun，SU Zongxian. Development and application of loading test system of prototype structure for underwater shield tunnel with large cross-section[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(2)：254-266.(in Chinese))
[13]	中华人民共和国国家标准编写组. GB50157—2013 地铁设计规范[S]. 北京：中国建筑工业出版社，2013.(The National Standards Compilation Group of People?s Republic of China. GB50157—2013 Code for design of metro[S]. Beijing：China Architecture and Building Press，2013.(in Chinese)) " target="_blank">
[4]	KASHIMA Y，KONDO N，INOUE M. Development and application of the DPLEX shield method： results of experiments using shield and segment models and application of the method in tunnel construction[J]. Tunnelling and Underground Space Technology，1996，11(1)：45-50. " target="_blank">
[8]	王彪，刘祖华，鲁亮. 上海崇明越江隧道衬砌整环试验加载方法研究[J]. 施工技术，2006，35(增)：52-54.(WANG Biao，LIU Zuhua，LU Liang. A loading method of the test for lining whole wreath of Shanghai Chongming tunnel[J]. Construction Technology， 2006，35(Supp.)：52-54.(in Chinese))
[9]	毕湘利，柳献，王秀志，等. 通缝拼装盾构隧道结构极限承载力的足尺试验研究[J]. 土木工程学报，2014，47(10)：117-127.(BI Xiangli，LIU Xian，WANG Xiuzhi，et al. Experimental investigation on the ultimate bearing capacity of continuous-jointed segmental tunnel linings[J]. China Civil Engineering Journal，2014，47(10)：117-127.(in Chinese))
[10]	LIU X，DONG Z B，BAI Y，et al. Investigation of the structural effect induced by stagger joints in segmental tunnel linings： First results from full-scale ring tests[J]. Tunnelling and Underground Space Technology，2017，66(1)：1-18. " target="_blank">
[11]	LIU X，BAI Y，YUAN Y，et al. Experimental investigation of the ultimate bearing capacity of continuously jointed segmental tunnel linings[J]. Structure and Infrastructure Engineering，2016，12(10)：1-16. " target="_blank">