基于微元法的低渗透储层定向射孔转向压裂裂缝动态扩展模型

doi:10.13722/j.cnki.jrme.2019.0753

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (488 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为明确低渗透非常规油气储层定向射孔转向压裂改造过程中裂缝扩展轨迹及其偏转距离的变化规律，综合考虑水平地应力差、射孔参数、注液参数、地层力学参数等因素对水力裂缝偏转扩展的影响，建立基于微元法的定向射孔转向压裂裂缝动态扩展模型(MEM模型)。该模型通过Visual Basic语言编制的迭代运算程序完成缝尖微小步长增量与偏转角之间的循环迭代计算，实现对转向裂缝动态扩展过程的模拟。通过比较MEM模型计算的裂缝扩展轨迹与现场压裂微地震监测结果、XFEM模型计算结果及室内压裂试验结果之间的差异，验证MEM模型的准确性。以临兴区块石盒子组致密砂岩储层为例，研究各因素对裂缝扩展轨迹及其偏转距离的影响规律与机制。研究结果表明：不同因素下裂缝扩展轨迹的变化趋势基本一致，裂缝从射孔端起裂后逐渐向水平最大地应力方向偏转，偏转幅度先增大后减小；裂缝偏转距离随水平地应力差的增加呈负对数规律减小，随射孔方位角、注液速率及压裂液黏度的增加呈线性规律增大；射孔长度对裂缝偏转距离几乎没有影响。该模型和结论对进一步认识定向射孔转向压裂过程具有重要意义。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	贺飞飞
	张润旭
	康天合
	康健婷
	郭俊庆

关键词 ：岩石力学, 微元法, 低渗透储层, 定向射孔, 转向压裂, 裂缝动态扩展模型

Abstract：In order to clarify the propagation track and the variation rule of deflection distance of fractures during oriented perforation steering fracturing in low permeability unconventional oil and gas reservoirs，a dynamic propagation model for oriented perforation steering fracturing cracks based on microelement method was established by comprehensively considering the influences of horizontal in situ stress difference，perforation parameters，injection parameters and formation mechanical parameters. The model completes the cyclic iteration calculation between the minor step increment and the propagation deflection angle of the crack tip using a calculation program compiled by Visual Basic，and realizes the simulation of the dynamic propagation of steering fractures. The accuracy of the MEM model was verified by comparing the differences among fracture trajectories calculated by MEM model and extended finite element(XFEM) model，micro-seismic monitoring values in the fracturing field and indoor fracturing test results. Taking the tight sandstone reservoir of Shihezi Formation in Linxing block as an example，the influence mechanisms of various factors on the deflection distance of the hydraulic fracture trajectory were studied. The results show that，compared with the XFEM model，the hydraulic fracture trajectory simulated by the proposed model better matches with the micro-seismic monitoring results. The deflection distance decreases negatively logarithmically with increasing horizontal in situ stress difference while increases linearly with increasing the perforated angle，injection rate and viscosity. The perforation length has little effect on the deflection distance. The research work is significant to further understand oriented perforation steering fracturing.

Key words： rock mechanics microelement method low permeability reservoir oriented perforation steering fracturing dynamic fracture propagation model

引用本文:

贺飞飞，张润旭，康天合，康健婷，郭俊庆. 基于微元法的低渗透储层定向射孔转向压裂裂缝动态扩展模型[J]. 岩石力学与工程学报, 2020, 39(4): 782-792.
HE Feifei，ZHANG Runxu，KANG Tianhe，KANG Jianting，GUO Junqing. Dynamic propagation model for oriented perforation steering fracturing cracks in low permeability reservoirs based on microelement method. , 2020, 39(4): 782-792.

链接本文:

http://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2019.0753 或 http://rockmech.whrsm.ac.cn/CN/Y2020/V39/I4/782

[1]	WANGEN M. A 2D volume conservative numerical model of hydraulic fracturing[J]. Computers and Structures，2017，182：448-458.
[14]	HU Y，CHEN G，CHENG W，et al. Simulation of hydraulic fracturing in rock mass using a smeared crack model[J]. Computers and Structures，2014，137：72-77.
[3]	DENG J，YANG Q，LIU Y，et al. 3D finite element modeling of directional hydraulic fracturing based on deformation reinforcement theory[J]. Computers and Geotechnics，2018，94：118-133.
[2]	ZHANG R，KANG T，KANG J，et al. Influence of horizontal control holes on fracture height containment in low permeability layered coal measure gas reservoirs[J]. Journal of Petroleum Science and Engineering，2019，179：104-111.
[5]	HOSSAIN M M，RAHMAN M K，RAHMAN S S. A comprehensive monograph for hydraulic fracture initiation from deviated wellbores under arbitrary stress regimes[C]// paper 54360-MS presented at the SPE Asia Pacific Oil and Gas Conference and Exhibition. New York，USA：SPE，1999：20-22.
[7]	张广清，陈勉，赵艳波. 新井定向射孔转向压裂裂缝起裂与延伸机制研究[J]. 石油学报，2008，29(1)：116-119.(ZHANG Guangqing，CHEN Mian，ZHAO Yanbo. Study on initiation and propagation mechanism of fractures in oriented perforation of new wells[J]. Acta Petrolei Sinica，2008，9(1)：116-119.(in Chinese))
[10]	陈勉. 页岩气储层水力裂缝转向扩展机制[J]. 中国石油大学学报：自然科学版，2013，37(5)：88-94.(CHEN Mian. Re-orientation and propagation of hydraulic fractures in shale gas reservoir[J]. Journal of China University of Petroleum：Natural Science，2013，37(5)：88-94.(in Chinese))
[12]	ZHANG G Q，CHEN M. Dynamic fracture propagation in hydraulic re-fracturing[J]. Journal of Petroleum Science and Engineering，2010，70(3/4)：266-272.
[17]	WANG B，ZHOU F，WANG D，et al. Numerical simulation on near-wellbore temporary plugging and diverting during re-fracturing using XFEM-Based CZM[J]. Journal of Natural Gas Science and Engineering，2018，55：368-381.
[19]	姜浒，陈勉，张广清，等. 定向射孔对水力裂缝起裂与延伸的影响[J]. 岩石力学与工程学报，2009，28(7)：1 321-1 326.(JIANG Hu，CHEN Mian，ZHANG Guangqing，et al. Impact of oriented perforation on hydraulic fracture initiation and propagation[J]. Journal of Rock Mechanics and Engineering，2009，28(7)：1 321-1 326.(in Chinese))
[22]	张云银，刘海宁，李红梅，等. 应用微地震监测数据估算储层压裂改造体积[J]. 石油地球物理勘探，2017，52(2)：309-314.(ZHANG Yunyin，LIU Haining，LI Hongmei，et al. Reservoir fracturing volume estimation with micro-seismic monitoring data[J]. Oil Geophysical Prospecting，2017，52(2)：309-314.(in Chinese))
[4]	CHEN Z，ECONOMIDES M J. Effect of near-wellbore fracture geometry on fracture execution and post-treatment well production of deviated and horizontal wells[J]. SPE Production and Facilities，1999，14(3)：177-186.
[6]	OLSON J E. Fracturing from highly deviated and horizontal wells： numerical analysis of non-planar fracture propagation[R]. [S. l.]：Society of Petroleum Engineers，2015.
[8]	ZHANG G Q，CHEN M，WANG X S，et al. Influence of perforation on formation fracturing pressure[J]. Petroleum Science，2004，1(3)：56-61.
[9]	ELBEL J L，MACK M G. Re-fracturing：observations and theories[C]// SPE Production Operations Symposium. [S. 1.]：[s. n.]，1993：21-23.
[11]	ZHANG G Q，CHEN M. The relationship between the production rate and initiation location of new fractures in a refractured well[J]. Petroleum Science and Technology，2010，28(7)：655-666.
[13]	LIU L，LI L，ELSWORTH D，et al. The impact of oriented perforations on fracture propagation and complexity in hydraulic fracturing[J]. Processes，2018，6(11)：213-232.
[15]	SESETTY V，GHASSEMI A. A numerical study of sequential and simultaneous hydraulic fracturing in single and multi-lateral horizontal wells[J]. Journal of Petroleum Science and Engineering，2015，132：65-76.
[16]	WANG X L，SHI F，LIU C，et al. Extended finite element simulation of fracture network propagation in formation containing frictional and cemented natural fractures[J]. Journal of Natural Gas Science and Engineering，2018，50：309-324.
[18]	SEPENRI J，SOLIMAN M Y，MORSE S M. Application of extended finite element method to simulate hydraulic fracture propagation from oriented perforations[R]. [S. 1.]：hydraulic fracturing technology conference. Society of Petroleum Engineers，2015.
[20]	龚迪光，曲占庆，李建雄，等. 基于ABAQUS平台的水力裂缝扩展有限元模拟研究[J]. 岩土力学，2016，37(5)：1 512-1 520. (GONG Diguang，QU Zhanqing，LI Jianxiong，et al. Extended finite element simulation of hydraulic fracture based on ABAQUS platform[J]. Rock and Soil Mechanics，2016，37(5)：1 512-1 520.(in Chinese))
[21]	盛茂，李根生. 水力压裂过程的扩展有限元数值模拟方法[J]. 工程力学，2014，31(10)：123-128.(SHENG Mao，LI Gensheng. Extended finite element modeling of hydraulic fracture propagation[J]. Engineering Mechanics，2014，31(10)：123-128.(in Chinese))
[23]	刘继民，刘建中，刘志鹏，等. 用微地震法监测压裂裂缝转向过程[J]. 石油勘探与开发，2005，32(2)：75-77.(LIU Jimin，LIU Jianzhong，LIU Zhipeng，et al. Micro-seismic monitoring on direction change of hydro fractured cracks[J]. Petroleum Exploration and Development，2005，32(2)：75-77.(in Chinese))
[24]	GRIFFIN L G，WRIGHT C A，DAVIS E J，et al. Surface and down hole tilt meter fracture mapping：An effective tool for monitoring drill cuttings disposal[C]// the 2000 SPE Annual Technical Conference. [S. l.]：[s. n.]，2000：1-4.