[23] |
陈 曦,曾亚武,孙翰卿,等. 岩石节理峰值抗剪强度新模型[J]. 岩土力学,2018,39(增2):123-130.(CHEN Xi,ZENG Yawu,SUN Hanqing,et al. A new peak shear strength model of rock joints[J]. Rock and Soil Mechanics,2018,39(Supp.2):123-130.(in Chinese))
|
[1] |
沈明荣,张清照. 规则齿型结构面剪切特性的模型试验研究[J]. 岩石力学与工程学报,2010,29(4):713-719.(SHEN Mingrong,ZHANG Qingzhao. Experimental study of shear deformation characteristics of rock mass discontinuities[J]. Chinese Journal of Rock Mechanics and Engineering,2010,29(4):713-719.(in Chinese))
|
[3] |
周 辉,程广坦,朱 勇,等. 大理岩规则齿形结构面剪切特性试验研究[J]. 岩土力学,2019,40(3):852-860.(ZHOU Hui,CHENG Guangtan,ZHU Yong,et al. Experimental study of shear deformation characteristics of marble dentate joints[J]. Rock and Soil Mechanics,2019,40(3):852-860.(in Chinese))
|
[6] |
Bahaaddini M. Effect of boundary condition on the shear behavior of rock joints in the direct shear test[J]. Rock Mechanics and Rock Engineering,2017,50(5):1 141-1 155.
|
[8] |
Liu H Y,Han H,An H M,et al. Hybrid finite-discrete element modelling of asperity degradation and gouge grinding during direct shearing of rough rock joints[J]. International Journal of Coal Science and Technology,2016,3(3):295-310.
|
[9] |
Hong E S,Kwon T H,Song K I. Observation of the degradation characteristics and scale of unevenness on three-dimensional artificial rock joint surfaces subjected to shear[J]. Rock Mechanics and Rock Engineering,2016,49(1):3-17.
|
[11] |
BARTON N,CHOUBEY V. The shear strength of rock joints in theory and practice[J]. Rock Mechanics and Rock Engineering,1977,10(1):1-54.
|
[13] |
ZHAO J. Joint surface matching and shear strength part B:JRC-JMC shear strength criterion[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts,1997,34(2):179-185.
|
[16] |
MAKSIMOVIC M. The shear strength components of a rough rock joint[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts,1996,33(8):769-783.
|
[18] |
GRASSELLI G. Shear strength of rock joints based on quantified surface description[Ph. D. Thesis][D]. Lausanne,Switzerland:Swiss Federal Institute of Technology,2001.
|
[19] |
GRASSELLI G,WIRTH J,EGGER P. Quantitative three-dimensional description of a rough surface and parameter evolution with shearing[J]. International Journal of Rock Mechanics and Mining Sciences,2002,39(6):789-800.
|
[21] |
XIA C C,TANG Z C,XIAO W M,et al. New peak shear strength criterion of rock joints based on quantified surface description[J]. Rock Mechanics and Rock Engineering,2014,47(2):387-400.
|
[26] |
唐志成,刘泉声,黄继辉,等. 改进的 Maksimovic 峰值剪切强度准则的试验验证[J]. 岩土力学,2014,35(增1):233-237.(TANG Zhicheng,LIU Quansheng,HUANG Jihui,et al. Experimental validation of modified Maksimovic peak shear strength criterion for rock fractures[J]. Rock and Soil Mechanics,2014,35(Supp.1):233-237.(in Chinese))
|
[28] |
Lam T,Johnston I. Shear behavior of regular triangular concrete/ rock joints—evaluation[J]. Journal of Geotechnical Engineering,1989,115(5):728-740.
|
[29] |
Haberfield C M,Johnston I W. A mechanistically-based model for rough rock joints[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts,1994,31(4):279-292.
|
[31] |
郭保华,程 坦,陈 岩,等. 大理岩裂隙渗流特性及充填砂土影响[J]. 水利学报,2019,50(4):463-474.(GUO Baohua,CHENG Tan,CHEN Yan,et al. Seepage characteristic of marble fracture and effect of filling sands[J]. Journal of Hydraulic Engineering,2019,50(4):463-474.(in Chinese))
|
[33] |
Yang Z Y,Lo S C,Di C C. Reassessing the joint roughness coefficient(JRC) estimation using Z2[J]. Rock Mechanical and Rock Engineering,2001,34(3):243-251.
|
[4] |
金磊磊,魏玉峰,黄 鑫,等. 基于节理面三维形貌的岩石节理抗剪强度计算模型[J]. 岩土力学,2020,41(10):3 355-3 364.(JIN Leilei,WEI Yufeng,HUANG Xin,et al. Shear strength calculation criterion of rock joints based on three-dimensional morphology[J]. Rock and Soil Mechanics,2020,41(10):3 355-3 364.(in Chinese))
|
[14] |
SCHNEIDER H J. The friction and deformation behavior of rock joints[J]. Rock Mechanics,1976,8(3):169-185.
|
[24] |
杨 洁,荣 冠,程 龙,等. 节理峰值抗剪强度试验研究[J]. 岩石力学与工程学报,2015,34(5):884-894.(YANG Jie,RONG Guan,CHENG Long,et al. Experimental study of peak shear strength of rock joints[J]. Chinese Journal of Rock Mechanics and Engineering,2015,34(5):884-894.(in Chinese))
|
[34] |
Li Y,Zhang Y. Quantitative estimation of joint roughness coefficient using statistical parameters[J]. International Journal of Rock Mechanics and Mining Sciences,2015,77:27-35.
|
[36] |
GHAZVINIAN A H. Importance of tensile strength on the shear behavior of discontinuities[J]. Rock Mechanics and Rock Engineering,2012,45(3):349-359.
|
[38] |
Homand F,Belem T,Souley M. Friction and degradation of rock joint surfaces under shear loads[J]. International Journal for Numerical and Analytical Methods in Geomechanics,2010,25(10):973-999.
|
[39] |
Tang H M,Ge Y F,Wang L Q,et al. Study on estimation method of rock mass discontinuity shear strength based on three-dimensional laser scanning and image technique[J]. Journal of Earth Science,2012,23(6):908-913.
|
[41] |
JING L. Numerical modeling of jointed rock masses by distinct element method for two and three dimensional problems[Ph. D. Thesis][D]. Sweden,Lulea:Lulea University of Technology,1990.
|
[2] |
曹 平,范 祥,蒲成志,等. 节理剪切试验及其表面形貌特征变化分析[J]. 岩石力学与工程学报,2011,30(3):480-485.(CAO Ping,FAN Xiang,PU Chengzhi,et al. Shear test of joint and analysis of morphology characteristic evolution of joint surface[J]. Chinese Journal of Rock Mechanics and Engineering,2011,30(3):480-485.(in Chinese))
|
[12] |
HONG E S,LEE J S,LEE I M. Underestimation of roughness in rough rock joints[J]. International Journal of Rock Mechanics and Mining Sciences,2008,32(11):1 385-1 403.
|
[22] |
唐志成,夏才初,宋英龙,等. Grasselli节理峰值抗剪强度公式再探[J]. 岩石力学与工程学报,2012,31(2):356-364.(TANG Zhicheng,XIA Caichu,SONG Yinglong,et al. Discussion about Grasselli¢s peak shear strength criterion for rock joints[J]. Chinese Journal of Rock Mechanics and Engineering,2012,31(2):356-364.(in Chinese))
|
[32] |
LI C C,ZHANG N,RUIZ J. Measurement of the basic friction angle of planar rock discontinuities with three rock cores[J]. Bulletin of Engineering Geology and the Environment,2019,78(2):847-856.
|
[42] |
LEE Y K,PARK J W,SONG J J. Model for the shear behavior of rock joints under CNL and CNS conditions[J]. International Journal of Rock Mechanics and Mining Sciences,2014,70:252-263.
|
[5] |
ZHANG X B,JIANG Q H,CHEN N,et al. Laboratory investigation on shear behavior of rock joints and a new peak shear strength criterion[J]. Rock Mechanics and Rock Engineering,2016,49(9):1-18.
|
[7] |
KWON T H,HONG E S,CHO G C. Shear behavior of rectangular-shaped asperities in rock joints[J]. KSCE Journal of Civil Engineering,2010,14(3):323-332.
|
[10] |
PATTON F D. Multiple modes of shear failure in rock[C]// Proceedings of the 1st Congress of International Society of Rock Mechanics. Lisbon,Portugal:[s. n. ],1966:509-513.
|
[15] |
MAKSIMOVIC M. New description of the shear strength for rock joints[J]. Rock Mechanics and Rock Engineering,1992,25(4):275-284.
|
[17] |
KULATILAKE P,SHOU G,HUANG T H,et al. New peak shear strength criteria for anisotropic rock joints[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts,1995,32(7):673-697.
|
[20] |
GRASSELLIA G,EGGER P. Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters[J]. International Journal of Rock Mechanics and Mining Sciences,2003,40(1):25-40.
|
[25] |
陈 曦,曾亚武,孙翰卿,等. 基于 Grasselli 形貌参数的岩石节理初始剪胀角新模型[J]. 岩石力学与工程学报,2019,38(1):133-152.CHEN Xi,ZENG Yawu,SUN Hanqing,et al.A new model of the initial dilatancy angle of rock joints based on Grasselli's morphological parameters[J]. Chinese Journal of Rock Mechanics and Engineering,2019,38(1):133-152.(in Chinese))
|
[27] |
唐志成,刘泉声,夏才初,等. 确定岩石节理 Maksimovic 峰值抗剪强度准则中粗糙度角“Δ?”的新方法[J]. 岩土力学,2014,35(2):551-555.(TANG Zhicheng,LIU Quansheng,XIA Caichu,et al. A new method for calculating roughness angle Δ? in Maksimovic peak shear strength criterion of rock joints[J]. Rock and Soil Mechanics,2014,35(2):551-555.(in Chinese))
|
[30] |
Hossaini K A,Babanouri N,Nasab S K. The influence of asperity deformability on the mechanical behavior of rock joints[J]. International Journal of Rock Mechanics and Mining Sciences,2014,70(1):154-161.
|
[35] |
董航宇. 不规则岩石节理剪切力学特性试验研究[硕士学位论文][D]. 焦作:河南理工大学,2017.(DONG Hangyu. Experimental study on mechanical shear properties of irregular rock fractures[M. S. Thesis][D]. Jiaozuo:Henan Polytechnic University,2017.(in Chinese))
|
[37] |
TIAN Y,LIU Q,LIU D,et al. Updates to Grasselli's peak shear strength model[J]. Rock Mechanics and Rock Engineering,2018,51(7):2 115-2 133.
|
[40] |
Ghazvinian A H,Taghichian A,Hashemi M,et al. The shear behavior of bedding planes of weakness between two different rock types with high strength difference[J]. Rock Mechanics and Rock Engineering,2010,43(1):69-87.
|