贵州发耳煤矿二次回采切顶卸压机制及矿压演化规律

doi:10.13722/j.cnki.jrme.2022.1206

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (3906 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为了有效地研究二次回采期间采场及巷道围岩稳定性，确保二次回采的整个过程中不会出现安全隐患，保证现场支护方案完善、合理，基于发耳煤矿50305工作面的地质状况，将50305工作面回采期间巷道围岩变形情况与采场应力进行系统地分析，从而使用合理的支护对策。通过理论分析，研究二次回采巷道顶板力学破断准则，提前确定破坏区范围。通过数值模拟，对工作面回采期间采场应力进行详细地分析，同时对巷道应力以及位移进行详细地分析，为二次回采期间使用合理的超前支护措施提供参考依据，确保安全开采。通过现场分析，分析二次回采期间巷道表面位移变形及液压支架荷载，观察现场应用效果以及是否存在不足之处，为其他矿井提供参考依据。二次回采巷道使用恒阻锚索、U型钢、临时支护共同协作的情况下进行支护，无煤柱自成巷二次回采效果良好。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	杨晓杰1
	2
	程满江1
	2
	王炯1
	2
	张文杰1
	2

关键词 ：采矿工程, 切顶卸压, 二次回采, 矿压规律, 围岩控制

Abstract：In order to effectively study the stability of mining face and roadway surrounding rock during the secondary mining period，to ensure that there will be no safety hazards in the whole process of secondary mining，and to ensure the perfect and reasonable on-site support scheme，based on the geological condition of the 50305 working face of Fa?er coal mine，the deformation of roadway surrounding rock and mining face stress during secondary mining face of 50305 working face are analyzed systematically，so as to use reasonable support measures. Through theoretical analysis，the mechanical fracture criterion of secondary mining roadway roof is studied，and the scope of the failure zone is determined in advance. Through the numerical simulation，the mining face stress during the working face mining is analyzed in detail，and the roadway stress and displacement are analyzed in detail，which provides a reference for the use of reasonable advance support measures during the secondary mining to ensure safe mining. Through the field analysis，the surface displacement and deformation of roadway and hydraulic support load during secondary mining are analyzed，and the field application effect and whether there are shortcomings are observed to provide reference for other mines. The secondary mining roadway is supported with constant resistance anchor cable，U-section steel and temporary support，and the secondary mining effect of self-formed roadway without coal pillar is good.

Key words： mining engineering roof cutting and pressure relief secondary mining mine pressure law surrounding rock control

引用本文:

杨晓杰1，2，程满江1，2，王炯1，2，张文杰1，2. 贵州发耳煤矿二次回采切顶卸压机制及矿压演化规律[J]. 岩石力学与工程学报, 2023, 42(10): 2358-2371.
YANG Xiaojie1，2，CHENG Manjiang1，2，WANG Jiong1，2，ZHANG Wenjie1，2. Pressure relief mechanism of roof cutting of Fa?er coal mine in Guizhou and the evolution law of ground pressure during secondary mining. , 2023, 42(10): 2358-2371.

链接本文:

http://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2022.1206 或 http://rockmech.whrsm.ac.cn/CN/Y2023/V42/I10/2358

[2]	宋振骐，崔增娣，夏洪春，等. 无煤柱矸石充填绿色安全高效开采模式及其工程理论基础研究[J]. 煤炭学报，2010，35(5)：705-710.(SONG Zhenqi，CUI Zengdi，XIA Hongchun，et al. Study on the green，safe and efficient mining mode of Gangue filling without coal pillar and its engineering theoretical basis[J]. Journal of China Coal Society，2010，35(5)：705-710.(in Chinese))
[4]	MA X G，HE M C，WANG Y J，et al. Study and application of roof cutting pressure releasing technology in retracement channel roof of Halagou 12201 working face[J]. Mathematical Problems in Engineering，2018，2018：1-15.
[5]	孙晓明，刘鑫，梁广峰，等. 薄煤层切顶卸压沿空留巷关键参数研究[J]. 岩石力学与工程学报，2014，33(7)：1 449-1 456.(SUN Xiaoming，LIU Xin，LIANG Guangfeng，et al. Study on key parameters of goaf retaining roadway for roof cutting and unloading in thin coal seam[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(7)：1 449-1 456.(in Chinese))
[10]	ZHANG X Y，HU J Z，XUE H J. Innovative approach based on roof cutting by energy-gathering blasting for protecting roadways in coal mines[J]. Tunnelling and Underground Space Technology incorporating Trenchless Technology Research，2020，99：387-398.
[14]	HE M C，GAO Y B，YANG J，et al. An innovative approach for gob-side entry retaining in thick coal seam longwall mining[J]. Energies，2017，10(11)：1 785-1 796.
[8]	钱鸣高，许家林，缪协兴. 煤矿绿色开采技术[J]. 中国矿业大学学报，2003，32(4)：5-10.(QIAN Minggao，XU Jialin，MIAO Xiexing. Green mining technology of coal mine[J]. Journal of China University of Mining and Technology，2003，32(4)：5-10.(in Chinese))
[3]	WANG Y J，WANG H S，HE M C. Mine pressure behavior characteristics and control methods of a reused entry that was formed by roof cutting：a case study[J]. Shock and Vibration，2020，2020：1-15.
[6]	LIU C L，ZHANG G H，ZHU Z J. Instability analysis and reinforcement support technology of coal-rock interbed roadway in Gaojiazhuang coal mine[J]. Advances in Civil Engineering，2021，2021：1-17.
[13]	何满潮，高玉兵，杨军，等. 无煤柱自成巷聚能切缝技术及其对围岩应力演化的影响研究[J]. 岩石力学与工程学报，2017，36(6)： 1 314-1 325.(HE Manchao，GAO Yubing，YANG Jun，et al. Study on self-formed roadway without coal pillar and its influence on stress evolution of surrounding rock[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(6)：1 314-1 325.(in Chinese))
[16]	何满潮，马资敏，郭志飚，等. 深部中厚煤层切顶留巷关键技术参数研究[J]. 中国矿业大学学报，2018，47(3)：468-477.(HE Manchao，MA Zimin，GUO Zhibiao，et al. Study on key technical parameters of roadway retention in deep medium thick coal seam[J]. Journal of China University of Mining and Technology，2018，47(3)：468-477.(in Chinese))
[18]	何满潮，郭鹏飞，王炯. 破碎顶板切顶成巷釆空区顶板垮落特征试验研究[J]. 煤炭科技，2017，(3)：1-7.(HE Manchao，GUO Pengfei，WANG Jiong. Experimental study on roof caving characteristics in caving area of broken roof cut into Roadway[J]. Coal Science and Technology，2017，(3)：1-7.(in Chinese))
[20]	YANG X J，SUN Y，WANG E Y，et al. Study and application of gob-side entry retaining formed by roof cutting and pressure relief in medium-thickness coal seam with hard roof[J]. Geotechnical and Geological Engineering，2020，38：3 709-3 723.
[1]	HE M C，WANG Q，WU Q Y. Innovation and future of mining rock mechanics[J]. Journal of Rock Mechanics and Geotechnical Engineering，2021，13(1)：1-21.
[11]	陈勇，柏建彪，王襄禹，等. 沿空留巷巷内支护技术研究与应用[J]. 煤炭学报，2012，37(6)：903-910.(CHEN Yong，BAI Jianbiao，WANG Xiangyu，et al. Research and application of support technology in goaf retaining roadway[J]. Journal of China Coal Society，2012，37(6)：903-910.(in Chinese))
[21]	刘晨康，杨晓杰，王二雨，等. 无煤柱自成巷聚能切缝技术研究[J]. 煤炭技术，2018，37(2)：99-101.(LIU Chenkang，YANG Xiaojie，WANG Eryu，et al. Research on the technology of self-formed roadway without coal pillar with cumulative energy cutting[J]. Coal Technology，2018，37(2)：99-101.(in Chinese))
[23]	孙晓明，刘鑫，梁广峰，等. 薄煤层切顶卸压沿空留巷关键参数研究[J]. 岩石力学与工程学报，2014，33(7)：1 449-1 456.(SUN Xiaoming，LIU Xin，LIANG Guangfeng，et al. Research on key parameters of goaf retaining roadway for roof cutting and unloading in thin coal seam[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(7)：1 449-1 456.(in Chinese))
[26]	GAO Y B，LIU D Q，ZHANG X Y，et al. Analysis and optimization of entry stability in underground longwall mining[J]. Sustainability，2017，9(11)：2 079-2 085.
[28]	袁帅. 哈拉沟矿切顶成巷二次回采巷道围岩稳定性分析[硕士学位论文][D]. 北京：中国矿业大学(北京)，2017.(YUAN Shuai. Stability analysis of surrounding rock of secondary stoping roadway in Halagou mine[M. S. Thesis][D]. Beijing：China University of Mining and Technology(Beijing)，2017.(in Chinese))
[31]	高庆. 宏一矿切顶卸压自成巷采动影响下变形规律研究[硕士学位论文][D]. 北京：中国矿业大学(北京)，2019.(GAO Qing. Study on deformation law of Hongyi mine under the influence of mining movement in self-formed roadway with roof cutting and pressure relief[M. S. Thesis][D]. Beijing：China University of Mining and Technology(Beijing)，2019.(in Chinese))
[9]	YANG H Q，ZHANG N，HAN C L，et al. Stability control of deep coal roadway under the pressure relief effect of adjacent roadway with large deformation：a case study[J]. Sustainability，2021，13(8)：412-425.
[19]	杨晓杰，王二雨，张民，等. 大埋深破碎顶板煤层切顶卸压成巷技术研究[J]. 煤炭科学技术，2017，45(9)：86-91.(YANG Xiaojie，WANG Eryu，ZHANG Min，et al. Research on roadway forming technology of broken roof and Coal seam with large buried depth[J]. Coal Science and Technology，2017，45(9)：86-91.(in Chinese))
[29]	杜敏. 中兴矿切顶卸压无煤柱自成巷二次回采围岩稳定性分析[硕士学位论文][D]. 北京：中国矿业大学(北京)，2017.(DU Min. Stability analysis of surrounding rock in Secondary mining of self-formed roadway without coal pillar in Zhongxing mine[M. S. Thesis][D]. Beijing：China University of Mining and Technology(Beijing)，2017.(in Chinese))
[7]	ZHAO G M，LIU C Y，KAO S M，et al. Stress and load-bearing structure analysis of the surrounding rock in a soft broken roadway[J]. Arabian Journal of Geosciences，2020，13(21)：8-23.
[12]	HE M C，ZHU G L，GUO Z B. Longwall mining “cutting cantilever beam theory and 110 mining method in China—The third mining science innovation[J]. Journal of Rock Mechanics and Geotechnical Engineering，2015，7(5)：483-492.
[15]	马新根，何满潮，李钊，等. 复合顶板无煤柱自成巷切顶爆破设计关键参数研究[J]．中国矿业大学学报，2019，48(2)：236-246.(MA Xingen，HE Manchao，LI Zhao，et al. Research on key parameters of roof cutting blasting design for self-formed roadway with composite roof without coal pillar[J]. Journal of China University of Mining and Technology，2019，48(2)：236-246.(in Chinese))
[17]	何满潮，王亚军，杨军，等. 切顶成巷工作面矿压分区特征及其影响因素分析[J]. 中国矿业大学学报，2018，47(6)：1 157-1 165. (HE Manchao，WANG Yajun，YANG Jun，et al. Analysis of ore pressure zone characteristics and its influencing factors in roadway cutting face[J]. Journal of China University of Mining and Technology，2018，47(6)：1 157-1 165.(in Chinese))
[22]	孙晓明，张勇，蔚保宁，等. 无煤柱开采技术控制设计与应用分析[J]. 煤炭技术，2017，36(3)：1-3.(SUN Xiaoming，ZHANG Yong，WEI Baoning，et al. Control design and application analysis of pillar-free mining technology[J]. Coal Technology，2017，36(3)：1-3.(in Chinese))
[25]	高玉兵，郭志飕，杨军，等. 沿空切顶巷道围岩结构稳态分析及恒压让位协调控制[J]. 煤炭学报，2017，42(7)：1 672-1 681.(GAO Yubing，GUO Zhizhao，YANG Jun，et al. Steady state analysis of surrounding rock structure of goaf roofing Roadway and coordinated control of constant pressure yield[J]. Journal of China Coal Society，2017，42(7)：1 672-1 681.(in Chinese))
[27]	翟春佳. 近距离上保护层开采沿空留巷围岩稳定性研究[硕士学位论文][D]. 北京：中国矿业大学(北京)，2020.(ZHAI Chunjia. Study on Stability of surrounding rock of goaf retaining roadway in close-range upper protective layer mining[M. S. Thesis][D]. Beijing：China University of Mining and Technology(Beijing)，2020.(in Chinese))
[32]	杨军，王宏宇，王亚军，等. 切顶卸压无煤柱自成巷顶板断裂特征研究[J]. 采矿与安全工程学报，2019，36(6)：1 137-1 144.(YANG Jun，WANG Hongyu，WANG Yajun，et al. Study on roof fracture characteristics of self-formed roadway with cut roof and pressure relief without coal pillar[J]. Journal of Mining and Safety Engineering，2019，36(6)：1 137-1 144.(in Chinese))
[24]	高玉兵，杨军，何满潮，等. 厚煤层无煤柱切顶成巷碎石帮变形机制及控制技术研究[J]. 岩石力学与工程学报，2017，36(10)：2 492-2 502.(GAO Yubing，YANG Jun，HE Manchao，et al. Research on deformation mechanism and control technology of gravel wall in thick coal seam without coal pillar cutting roadway[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(10)：2 492-2 502.(in Chinese))
[30]	张勇. 哈拉沟矿复合顶板切顶成巷围岩应力演化规律与控制技术[博士学位论文][D]. 北京：中国矿业大学(北京)，2017.(ZHANG Yong. Stress evolution law and control technology of surrounding rock of composite roof cutting roadway in Haragou mine[Ph. D. Thesis][D]. Beijing：China University of Mining and Technology(Beijing)，2017.(in Chinese))
[33]	郭志飚，王将，曹天培，等. 薄煤层切顶卸压自动成巷关键参数研究[J]. 中国矿业大学学报，2016，45(5)：879-885.(GUO Zhibiao，WANG Jun，CAO Tianpei，et al. Research on key parameters of automatic roadway formation by roof cutting and pressure relief in thin coal seam[J]. Journal of China University of Mining and Technology，2016，45(5)：879-885.(in Chinese))