基于3D打印的复杂裂隙岩体模型制备试验研究

doi:10.13722/j.cnki.jrme.2022.1103

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (3426 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为解决复杂裂隙岩体物理模型的制备难题，在系统梳理现有裂隙岩体3D打印制备方法的基础上，提出基于3D打印的复杂裂隙岩体模型制备方法，通过溶解试验筛选出可溶性3D打印材料，使用可溶性3D打印材料制备出包含裂隙网络的复杂裂隙岩体模型，通过单轴压缩实验室试验和数值模拟试验验证复杂裂隙岩体模型的力学性质。结果表明，使用可溶性3D打印材料先行打印裂隙网络实体模型，待浇筑砂浆并养护后，再使用溶剂将裂隙材料溶解，可制备出性能优良的复杂裂隙岩体模型。改性PVA材料溶解性能优异，在浇筑砂浆条件下仍可快速溶解，形成的溶解物可作为裂隙填充材料，并具有黏结性，使复杂裂隙岩体不发生解体，适合用于制作复杂裂隙岩体模型。基于3D打印的复杂裂隙岩体制备方法有两大突出优势：与3DP直接制备方法相比，使用常规砂浆作为模型主体材料，性质可调，模型仿真性能好；与FDM间接制备方法相比，使用可溶性3D打印材料打印裂隙网络实体模型，裂隙实体可溶解，消除了裂隙材料对模型力学性质的影响。基于3D打印的复杂裂隙岩体模型制备方法可以制备主体材料为常规砂浆、包含裂隙网络的复杂裂隙岩体模型，裂隙隙宽可小至0.4 mm，并且裂隙具有弱黏结性，可广泛用于开展复杂裂隙岩体的物理模拟试验，从而将裂隙岩体的物理模拟能力扩展至复杂裂隙岩体。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王晓卿1
	2
	3
	高富强1
	2
	3
	娄金福1
	2
	3

关键词 ：岩石力学, 3D打印, 复杂裂隙岩体模型, 可溶性打印材料, 单轴压缩试验

Abstract：In order to solve the problem of the physical model preparation of highly fractured rock mass，a preparation method for physical model of highly fractured rock mass based on 3D printing was proposed by systematically reviewing the existing 3D printing preparation methods for fractured rock mass. The soluble 3D printing materials were screened out through the dissolution test. The physical models of highly fractured rock mass contained a fracture network were prepared using the soluble 3D printing materials，and the mechanical properties of the highly fractured rock mass model were verified by uniaxial compression laboratory test and numerical simulation test. The results show that the proposed method can generate physical models of highly fractured rock mass with excellent performance by first printing the physical model of fracture network with soluble 3D printing materials，next pouring the mortar and curing，and then dissolving the fracture material with solvent. The modified PVA material has excellent solubility，which can dissolve quickly under the conditions of pouring mortar，and the dissolved material can be used as filler for fractures. The dissolved material can prevent the disintegration of the highly fractured rock mass model because of the cohesiveness. Therefore，the modified PVA material is suitable for preparing physical models of highly fractured rock mass. The preparation method of highly fractured rock mass based on 3D printing has two outstanding advantages. Compared with the direct preparation method by 3DP(three dimensional printing)，the physical models have good simulation performance because of the use of conventional mortar as the main material，which has adjustable properties. Compared with the indirect preparation method by FDM(fused deposition modelling)，the influence of fracture material on the mechanical properties of the physical model is eliminated by using soluble 3D printing materials to print the fracture network. The proposed method based on 3D printing can prepare physical models of highly fractured rock mass with conventional mortar as the main material and containing a fracture network, in which the width of the fracture can be as small as 0.4 mm and the fractures have weak cohesion. The physical models can be widely used for physical simulation experiments on highly fractured rock mass，thereby expanding the physical simulation capabilities of fractured rock mass to highly fractured rock mass.

Key words： rock mechanics 3D printing highly fractured rock mass model soluble 3D printing materials uniaxial compression test

引用本文:

王晓卿1，2，3，高富强1，2，3，娄金福1，2，3. 基于3D打印的复杂裂隙岩体模型制备试验研究[J]. 岩石力学与工程学报, 2023, 42(S2): 3913-3920.
WANG Xiaoqing1，2，3，GAO Fuqiang1，2，3，LOU Jinfu1，2，3. Experimental research on model preparation of highly fractured rock mass based on 3D printing#br#. , 2023, 42(S2): 3913-3920.

链接本文:

http://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2022.1103 或 http://rockmech.whrsm.ac.cn/CN/Y2023/V42/IS2/3913

[17]	JIANG Q，FENG X T，GONG Y H，et al. Reverse modelling of natural rock joints using 3D scanning and 3D printing[J]. Computers and Geotechnics，2016，73：210-220.
[2]	WANG X Q，KANG H P，GAO F Q. Numerical investigation on the shear behavior of jointed coal[J]. Computers and Geotechnics，2019，106：274-285.
[4]	YANG X X，JING H W，TANG C A，et al. Effect of parallel joint interaction on mechanical behavior of jointed rock mass models[J]. International Journal of Rock Mechanics and Mining Sciences，2017，92：40-53.
[6]	JIANG C，ZHAO G F. A preliminary study of 3D printing on rock mechanics[J]. Rock Mechanics and Rock Engineering，2015，48(3)：1 041-1 050.
[9]	田威，余宸，张丽. 3D打印技术在岩石力学中的应用[J]. 力学与实践，2021，43(2)：181-189.(TIAN Wei，YU Chen，ZHANG Li. Applications of 3D printing technology in rock mechanics[J]. Mechanics in Engineering，2021，43(2)：181-189.(in Chinese))
[10]	田威，余宸，王肖辉，等. 3D打印裂隙岩体动态力学性能及能量耗散规律初探[J]. 岩石力学与工程学报，2022，41(3)：446-456. (TIAN Wei，YU Chen，WANG Xiaohui，et al. A preliminary research on dynamic mechanical properties and energy dissipation rule of 3D printed fractured rock[J]. Chinese Journal of Rock Mechanics and Engineering，2022，41(3)：446-456.(in Chinese))
[12]	王本鑫，金爱兵，孙浩，等. 基于DIC的含不同角度3D打印粗糙交叉节理试样破裂机制研究[J]. 岩土力学，2021，42(2)：439-450.(WANG Benxin，JIN Aibing，SUN Hao，et al. Study on fracture mechanism of specimens with 3D printed rough cross joints at different angles based on DIC[J]. Rock and Soil Mechanics，2021，42(2)：439-450.(in Chinese))
[14]	黄娜，蒋宇静，程远方，等. 基于3D打印技术的复杂三维粗糙裂隙网络渗流特性试验及数值模拟研究[J]. 岩土力学，2021，42(6)：1 659-1 680.(HUANG Na，JIANG Yujing，CHENG Yuanfang，et al. Experimental and numerical study of hydraulic properties of three-dimensional rough fracture networks based on 3D printing technology[J]. Rock and Soil Mechanics，2021，42(6)：1 659-1 680. (in Chinese))
[16]	SUZUKI A，LI K W，HORNE R N. Potential utilizations of 3D printed fracture network model[C]// Proceedings of the 42nd Workshop on Geothermal Reservoir Engineering. Stanford：[s. n.]，2017：1-7.
[18]	熊祖强，江权，龚彦华，等. 基于三维扫描与打印的岩体自然结构面试样制作方法与剪切试验验证[J]. 岩土力学，2015，36(6)： 1 557-1 565.(XIONG Zuqiang，JIANG Quan，GONG Yanhua，et al. A method for preparing natural joints of rock mass based on 3D scanning and printing techniques and its experimental validation[J]. Rock and Soil Mechanics，2015，36(6)：1 557-1 565.(in Chinese))
[19]	鞠杨，谢和平，郑泽民，等. 基于3D打印技术的岩体复杂结构与应力场的可视化方法[J]. 科学通报，2014，59(36)：5 354-5 365. (JU Yang，XIE Heping，ZHENG Zemin，et al. Visualization of the complex structure and stress field inside rock by means of 3D printing technology[J]. Science Bulletin，2014，59(36)：5 354-5 365.(in Chinese))
[20]	JU Y，WANG L，XIE H，et al. Visualization and transparentization of the structure and stress field of aggregated geomaterials through 3d printing and photoelastic techniques[J]. Rock Mechanics and Rock Engineering，2017，50(6)：1 383-1 407.
[7]	JIANG Q，FENG X，SONG L，et al. Modeling rock specimens through 3D printing：tentative experiments and prospects[J]. Acta Mechanica Sinica，2016，32(1)：101-111.
[5]	JIANG C，ZHAO G F，ZHU J B，et al. Investigation of dynamic crack coalescence using a gypsum-like 3D printing material[J]. Mechanics and Rock Engineering，2016，49(10)：3 983-3 998.
[15]	ZHU J B，ZHOU T，LIAO Z Y，et al. Replication of internal defects and investigation of mechanical and fracture behaviour of rock using 3D printing and 3D numerical methods in combination with X-ray computerized tomography[J]. International Journal of Rock Mechanics and Mining Sciences，2018，106：198-212.
[1]	DIEGO M I，MATTHEW E P，CAROLINE D，et al. The synthetic rock mass approach for jointed rock mass modelling[J]. International Journal of Rock Mechanics and Mining Sciences，2011，48(2)：219-244.
[3]	王晓卿，康红普，高富强. 基于合成岩体方法的正交裂隙煤体围压效应研究[J]. 煤炭学报，2021，46(9)：2 865-2 873.(WANG Xiaoqing，KANG Hongpu，GAO Fuqiang. Investigation on confining-pressure effect of coal mass containing orthogonal fractures based on synthetic rock mass approach[J]. Journal of China Coal Society，2021，46(9)：2 865-2 873.(in Chinese))
[8]	江权，宋磊博. 3D打印技术在岩体物理模型力学试验研究中的应用研究与展望[J]. 岩石力学与工程学报，2018，37(1)：23-37. (JIANG Quan，SONG Leibo. Application and prospect of 3D printing technology to physical modeling in rock mechanics[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(1)：23-37.(in Chinese))
[11]	王培涛，刘雨，章亮，等. 基于3D打印技术的裂隙岩体单轴压缩特性试验初探[J]. 岩石力学与工程学报，2018，37(2)：364-373.(WANG Peitao，LIU Yu，ZHANG Liang，et al. Preliminary experimental study on uniaxial compressive properties of 3D printed fractured rock models[J]. Chinese Journal of Rock Mechanics and Engineering，2018，37(2)：364-373.(in Chinese))
[13]	张科，齐飞飞，陈宇龙. 基于3D打印和DIC技术的裂隙网络模型变形破裂特征及填充物影响效应[J]. 岩土力学，2020，41(8)： 2 555-2 563.(ZHANG Ke，QI Feifei，CHEN Yulong. Deformation and fracturing characteristics of fracture network model and influence of filling based on 3D printing and DIC technologies[J]. Rock and Soil Mechanics，2020，41(8)：2 555-2 563.(in Chinese))
[21]	LIU P，JU Y，RANJITH P G，et al. Visual representation and characterization of three-dimensional hydrofracturing cracks within heterogeneous rock through 3D printing and transparent models[J]. International Journal of Coal Science and Technology，2016，3(3)：284-294.