考虑分形特征的节理面渗流计算模型

doi:10.13722/j.cnki.jrme.2014.s2.002

摘要
图/表
参考文献(27)
相关文章 (15)

全文: PDF (2365 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要粗糙表面对节理渗流影响显著，但难以定量描述，几何分形作为描述岩石节理表面形貌特征的一种方法，近年来得到了广泛应用。为了准确表述节理表面粗糙形态对节理渗流的影响，基于节理接触面积和开度，结合节理面分形特征影响，建立节理面水力开度计算分形修正公式。以自然节理试件为原型预制类岩石材料节理试件，通过激光测试获取节理表面三维形貌数据，应用立方体覆盖法计算节理试件的分形维数，并进行剪切–渗流耦合试验，计算剪切试验过程中水力开度变化规律。同时计算节理试件平均开度以及接触面积比在剪切过程中的变化规律，并应用Zimmerman计算公式、Yeo修正计算公式和分形修正公式分别计算节理面的水力开度，将计算结果与实测值进行比较。分析表明：分形修正公式与试验测试值吻合较好，实现了节理面接触面积、节理开度和节理面分形维数的良好耦合，能更为全面地描述节理面的渗流特性，具有较好的适用性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王刚1
	2
	黄娜1
	蒋宇静1
	3
	李博3
	吴学震1
	张学朋1

关键词 ：岩石力学, 粗糙节理, 分形维数, 水力开度, 接触面积

Abstract：Understanding hydro-mechanical behavior of single rock joints is a basic building block to assess several important properties of jointed rock mass associated with fluid flow，a representative one among which is mass transport in rock mass. The surface roughness plays an important role in the fluid flow behavior through a single rock joint，which has received extensive studies in the past a few decades，by using various approaches，such as JRC，statistical parameters and fractal dimension. An improved equation involving the relation between mechanical aperture and hydraulic aperture，with the employment of the fractal dimension of joint surface was proposed to evaluate the effects of surface roughness on the behavior of fluid flow through rock joints. To verify this equation，a number of coupled shear-flow tests for several artificial rock joint specimens with the surface characteristics of natural rock joints were carried out，and the evolution of mechanical and hydraulic apertures during shear processes were evaluated. The fractal dimension of each specimen was calculated using cubic covering method based on the measured surface topographical data. Compared with other commonly used equations，such as Zimmermans equation and Yeos correction equation，the proposed equation gives better fitting to experimental measurements，which may serve as an effective approach for quantitative estimation of the hydro-mechanical behavior of rock joints.

Key words： rock mechanics rough rock joint fractal dimension hydraulic aperture contact area

引用本文:

王刚1，2，黄娜1，蒋宇静1，3，李博3，吴学震1，张学朋1. 考虑分形特征的节理面渗流计算模型[J]. 岩石力学与工程学报, 2014, 33(S2): 3397-3405.
WANG Gang1，2，HUANG Na1，JIANG Yujing1，3，LI Bo3，WU Xuezhen1，ZHANG Xuepeng1. SEEPAGE CALCULATION MODEL FOR ROUGH JOINT SURFACE CONSIDERING FRACTAL CHARACTERISTICS. , 2014, 33(S2): 3397-3405.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2014.s2.002 或 https://rockmech.whrsm.ac.cn/CN/Y2014/V33/IS2/3397

[1] SNOW D T. Anisotropic permeability of fractured media[J]. Water Resources Research，1969，5(6)：1 273–1 289.

[2] WALSH J B. Effect of pore pressure and confining pressure on fracture permeability[J]. International Journal of Rock Mechanics and Mining Sciences，1981，18(5)：429–435.

[3] ZIMMERMAN R W，CHEN D W，COOK N G W. The effect of contact area on the permeability of fractures[J]. Journal of Hydrology，1992，139(1/4)：79–96.

[4] YEO I W. Effect of contact obstacles on fluid flow in rock fractures[J]. Geosciences Journal，2001，5(2)：139–143.

[5] COOK A M，MYER L R. The effect of tortuosity on flow through a natural fracture[C]// Proceedings of the 31st U.S. Symposium，Rock Mechanics：Contributions and Challenges. [S.l.]：[s. n.]，1990：371–378.

[6] PATRI N，CHENG H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J]. Lubric Technology，1978，100(1)：12–17.

[7] TSANG Y W. The effect of tortuosity on fluid flow through a single fracture[J]. Water Resources Research，1984，20(9)：1 209–1 215.

[8] 肖维民，夏才初，王伟，等. 考虑曲折效应的粗糙节理渗流计算公式研究[J]. 岩石力学与工程学报，2011，30(12)：2 416–2 425. (XIAO Weimin，XIA Caichu，WANG Wei，et al. Study on calculation of fluid flow through a single rough joint by considering flow tortuosity effect[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(12)：2 416–2 425.(in Chinese))

[9] MANDELBROT B B. The fractal geometry of nature[M]. New York：Freeman，1982：84–113.

[10] BROWN S R. Fluid flow through rock joints：the effect of surface roughness[J]. Journal of Geophysical Research，1987，92(B2)：1 337–1 347.

[11] LEE Y H，CARR J R，BARR D J，et al. The fractal dimension as a measure of the roughness of rock discontinuity profiles[J]. International Journal of Rock Mechanics and Mining Sciences，1990，27(6)：453–464.

[12] MAERZ N H，FRANKLIN J A，BENNETT C P. Joint roughness measurement using shadow profilometry[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1990，27(5)：329–343.

[13] 谢和平，PARISEAU W G. 岩石节理粗糙系数(JRC)的分形估计[J]. 中国科学：B辑，1994，24(5)：524–530.(XIE Heping，PARISEAU W G. Fractal estimation of rock joint roughness coefficient[J]. Science in China：Series B，1994，24(5)：524–530.(in Chinese))

[14] MURATA S，SAITO T. Estimation of tortuosity of fluid flow through a single fracture[J]. The Journal of Canadian Petroleum Technology，2003，12(42)：39–45.

[15] PIGGOTT A R，ELSWORTH D. Analytical model for flow through obstructed domains[J]. Journal of Geophysical Research，1992，97(6)：2 085–2 093.

[16] SCHLICHTING H. Boundary-layer theory[M]. New York：McGraw Hill，1987：598–609.

[17] OBDAM A N M，VELING E J M. Elliptical inhomogeneities in groundwater flow—an analytical description[J]. Journal of Hydrology，1987，95(1/2)：87–96.

[18] KIRKPATRICK S. Percolation and conduction[J]. Reviews of Modern Physics，1973，45(4)：574–588.

[19] ZIMMERMAN R W，BODVARSSON G S. Hydraulic conductivity of rock fractures[J]. Transport in Porous Media，1996，23(1)：1–30.

[20] 谢和平. 分形—岩石力学导论[M]. 北京：科学出版社，1996：29–45.(XIE Heping. Introduction of fractal-rock mechanics[M]. Beijing：Science Press，1996：29–45.(in Chinese))

[21] LI B，JIANG Y J，KoyamadT，et al. Experimental study of the hydro-mechanical behavior of rock joints using a parallel-plate model containing contact areas and artificial fractures[J]. International Journal of Rock Mechanics and Mining Sciences，2008，45(3)：362–375.

[22] 李博，蒋宇静. 岩石单节理面剪切与渗流特性的试验研究与数值分析[J]. 岩石力学与工程学报，2008，27(12)：2 431–2 439.(LI Bo，JIANG Yujing. Experimental study and numerical analysis of shear and flow behaviors of rock with single joint[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(12)：2 431–2 439.(in Chinese))

[23] ESAKI T，DU S，MITANI Y，et al. Development of a shear-flow test apparatus and determination of coupled properties for a single rock joint[J]. International Journal of Rock Mechanics and Mining Sciences，1999，36(5)：641–650.

[24] CLARK K C. Computation of the fractal dimension of topographic surfaces using the triangular prism surface area method[J]. Computers and Geoscience，1986，12(5)：713–722.

[25] XIE H，WANG J A，KWASNIEWSKI M A. Multifractal characterization of rock fracture surfaces[J]. International Journal of Rock Mechanics and Mining Sciences，1999，35(1)：19–27.

[26] 周宏伟，谢和平，KWASNIEWSKI M A. 粗糙表面分维计算的立方体覆盖法[J]. 摩擦学学报，2000，20(6)：454–459.(ZHOU Hongwei，XIE Heping，KWASNIEWSKI M A. Fractal dimension of rough surface estimated by the cubic covering method[J]. Tribology，2000，20(6)：454–459.(in Chinese))

[27] BARTON N，BANDIS S，BAKHTAR K. Strength，deformation and conductivity coupling of rock joins[J]. International Journal of Rock Mechanics and Mining Sciences Geomechanics Abstracts，1985，22(3)：121–140.