应用物理模型和三维非连续变形分析方法分析楔形体破坏

摘要
图/表
参考文献(18)
相关文章 (15)

全文: PDF (1625 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要目前，大多数学者都采用极限平衡方法分析岩体中楔形体的稳定性，但这些极限平衡方法都有一些局限性。本文建立了物理模型系统研究楔形体破坏，另外，应用三维非连续变形分析（DDA）方法分析这些物理模型。结果显示三维DDA不仅给出与物理模型试验相同的楔形体破坏模式，包括复杂的破坏方式，扭转滑动破坏，而且楔形体随时间的运动轨迹亦相同。因此，本文发展的三维DDA由于考虑动力平衡和所有破坏模式包括复杂的旋转破坏模式，可作为常规的分析楔形体稳定性的方法。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：非连续变形分析, 物理模型, 楔形体

Abstract：The failure of a block or wedge of rock in a discontinuous rock mass has been analyzed by many researchers, mainly based on the limit equilibrium approach. A review of existing limit equilibrium analysis methods shows some limitations. To address these limitations, physical models have been built to study wedge failure systematically. In addition, the physical models have been analyzed by three-dimensional discontinuous deformation analysis (3-D DDA). The results show that physical modeling and 3-D DDA give the same behavior in all cases, including a case involving torsional sliding. Moreover, 3-D DDA results agree well with physical modeling results in terms of the time history of block movement. This shows that the 3-D DDA developed can potentially be used as a general stability analysis of a wedge because it considers dynamic equilibrium and general failure modes including rotational ones.

收稿日期: 2003-04-07

引用本文:

杨文柱;姜清辉;孙宁. 应用物理模型和三维非连续变形分析方法分析楔形体破坏[J]. 岩石力学与工程学报, 2003, 22(S1): 2268-2273.
Yeung, M. R.1,Jiang Qinghui2,Sun Ning1 . Physical modeling and three-dimensional discontinuous deformation analysis of wedge failure. , 2003, 22(S1): 2268-2273.

链接本文:

https://rockmech.whrsm.ac.cn/CN/ 或 https://rockmech.whrsm.ac.cn/CN/Y2003/V22/IS1/2268

1. Francavilla A, Zienkiewicz OC. A note on numerical computational of elastic contact problems. Int J Numer Meth Engng 1975;9(4):913-924.

2. Londe P, Vigier G, Vormeringer R. Stability of rock slopes, a three-dimensional study. J Soil Mech and Found Div (ASCE). 1969;95(1):235-262.

3. Hendron AJ, Cording EJ, Aiyer AK. Analytical and graphical methods for the analysis of slopes in rock masses. Tech Rep GL-80-2, U.S. Army Engineers Nuclear Cratering Group, Livermore, California, 1980.

4. Hoek ET, Bray JW. Rock slope engineering, 3rd Ed. Inst of Min and Metallurgy, London, England, 1981.

5. Warburton PM. Vector stability analysis of an arbitrary polyhedral rock block with any number of free faces. Int J Rock Mech Min Sci and Geomech Abstr 1981;18(5):415-427.

6. Priest SD. Hemispherical projection methods in rock mechanics. George Allan and Unwin, London, 1985.

7. Goodman RE, Shi GH. Block Theory and Its Application to Rock Engineering. Prentice-Hall, London, 1985.

8. Chan HC, Einstein HH. Approach to complete limit equilibrium analysis for rock wedges – the method of “artificial supports”. Rock Mech 1981;14(2):59-86.

9. Mauldon M, Goodman RE. Vector analysis of keyblock rotation. J Geotech Engng (ASCE). 1996;122(12):976-987.

10. Tonon F. Generalization of Mauldon’s and Goodman’s analysis of keyblock rotations. J Geotech Engng (ASCE). 1998;124(10):913-922.

11. Windsor CR, Thompson AG. Reinforcement design for jointed rock masses. Proc 33rd U.S. Symp Rock Mech, Rotterdam, Netherland: A. A. Balkema, 1992. p.520-521.

12. Hatzor Y. Validation of block theory using field case histories. 1992, Ph.D. thesis, Department of Civil Engineering, University of California, Berkeley.

13. Shi GH. Discontinuous Deformation Analysis: a new numerical model for the statics and dynamics of block systems. 1988, Ph.D. thesis, Department of Civil Engineering, University of California, Berkeley.

14. Cheng YM, Zhang YH. Rigid body rotation and block internal discretization in DDA analysis. Int J Numerical and Analytical Methods in Geomech 2000;24(6):567-578.

15. Kim YI, Amadei B, Pan E. Modeling the effect of water, excavation sequence and rock reinforcement with discontinuous deformation analysis. Int J Rock Mech Min Sci 1999;36(7):949-970.

16. Shi GH. Three dimensional discontinuous deformation analysis. Proc 38th U.S. Rock Mech Symp. Washington, D.C., A.A. Balkema: 2001.

17. Jang HI. and Lee CI. Development of a three-dimensional discontinuous deformation analysis technique and its application to toppling failure. Proceeding of 5^th International Conference on Analysis of Discontinuous Deformation, A.A. Balkema.,2002.

18. 姜清辉, 丰定祥. 三维非连续变形分析方法中角—面接触模型的研究. 岩石力学与工程学报，2000,19（增）：930-935