真三轴应力条件下层状复合岩石破坏准则

doi:10.13722/j.cnki.jrme.2016.0682

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (569 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为探究层状复合岩石的强度特性，利用均质化理论方法，将层状复合岩石虚拟为一种等效的均质岩石，建立了真三轴应力条件下基于MLC准则的层状复合岩石破坏准则，该准则由层状复合岩石各组分的强度参数以及几何参数来确定；同时，利用自行研制的多功能真三轴流固耦合试验系统，进行细砂岩、粉砂岩、板岩和层状复合岩石在三向不等应力条件(体应力不变，改变应力罗德角、等中主应力系数等?3)下的真三轴试验，研究层状复合岩石的强度特性以及中间主应力和中主应力系数对复合岩石强度的影响。真三轴试验结果表明，所建立的准则能较好的描述层状复合岩石的强度特征，可为解决层状岩石工程结构的强度及稳定性问题提供了理论参考和依据。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	尹光志1
	2
	3
	李星1
	2
	鲁俊1
	2
	宋真龙1
	2

关键词 ：岩石力学, 真三轴应力, 层状复合岩石, 中主应力系数, 破坏准则

Abstract：In order to explore the strength characteristics of stratified composite rock，a homogenization procedure was undertaken to convert the layered composite rock into an equivalent homogeneous one and an failure criterion based on the MLC failure criterion under true triaxial condition was established in terms of the strength and geometric parameters. A large number of tests on sandstone，siltstone，slate and composite rock under different true triaxial conditions(changing lode?s angle and ?3- and coefficient of intermediate principal stress-constant tests) were carried out with the multi-functional experiment system built in-house for fluid-solid coupling under true triaxial condition to investigate the effect of coefficient of intermediate principal stress on strengths. The results showed that the proposed criterion for layered composite rock described with fair accuracy the ultimate behaviour of layered rocks subjected to the true triaxial conditions.

Key words： rock mechanics true triaxial stress conditions layered composite rock coefficient of intermediate principal stress failure criterion

引用本文:

尹光志1，2，3，李星1，2，鲁俊1，2，宋真龙1，2. 真三轴应力条件下层状复合岩石破坏准则[J]. 岩石力学与工程学报, 2017, 36(2): 261-269.
YIN Guangzhi1，2，3，LI Xing1，2，LU Jun1，2，SONG Zhenlong1，2. A failure criterion for layered composite rock under true triaxial stress conditions. , 2017, 36(2): 261-269.

链接本文:

http://www.rockmech.org/CN/10.13722/j.cnki.jrme.2016.0682 或 http://www.rockmech.org/CN/Y2017/V36/I2/261

[3]	LANDRIANI G S，TALIERCIO A. A note on failure conditions for layered materials[J]. Meccanica，1987，22(2)：97-102. " target="_blank">
[8]	赵平劳，姚增. 层状结构岩体的复合材料本构模型[J]. 兰州大学学报：自然科学版，1990，26(2)：114-118.(ZHAO Pinglao，YAO Zeng. The composite material constitutive model of bedded rocks[J]. Journal of Lanzhou University，1990，26(2)：114-118.(in Chinese))
[4]	阳友奎，蒋为民. 复合岩石的破坏准则[J]. 重庆大学学报，1990，13(6)：19-25.(YANG Youkui，JIANG Weimin. A failure criterion of composite rock[J]. Journal of Chongqing University，1990，13(6)：19-25.(in Chinese))
[5]	ATTEWELL P B，SANFORD M R. Intrinsic shear strength of a brittle anisotropic rock-I[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1974，11(11)：423-430. " target="_blank">
[11]	左建平，谢和平，吴爱民，等. 深部煤岩单体及组合体的破坏机制与力学特性研究[J]. 岩石力学与工程学报，2011，30(1)：84-92.(ZUO Jianping，XIE Heping，WU Aimin，et al. Investigation on failure mechanisms and mechanical behaviors of deep coal-rock single body and combined body[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(1)：84-92.(in Chinese))
[16]	HAIMSON B，CHANG C. A new true triaxial cell for testing mechanical properties of rock and its use to determine rock strength and deformability of Westerly granite[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(1/2)：285-296. " target="_blank">
[22]	MOGI K. Fracture and flow of rocks under high triaxial compression[J]. Journal of Geophysical Research Atmospheres，1971，76：1 255-1 269. " target="_blank">
[27]	FONTOURA S. Lade and modified lade 3D rock strength criteria[J]. Rock Mechanics and Rock Engineering，2012，45(6)：253-258. " target="_blank">
[7]	佘成学，范玉祥，陈胜宏. 具有弯曲效应的三维层状岩体屈服准则[J]. 岩土力学，1998，19(3)：38-42.(SHE Chengxue，FAN Yuxiang，CHEN Shenghong. A Three-dimensional yield criterion for layered rock mass with bending effect considered[J]. Rock and Soil Mechanics，1998，19(3)：38-42.(in Chinese))
[9]	LIU J，WANG E Y，SONG D Z，et al. Effect of rock strength on failure mode and mechanical behavior of composite samples[J]. Arabian Journal of Geosciences，2014，8(7)：1-13. " target="_blank">
[18]	MOGI K. Effect of the intermediate principal stress on rock failure[J]. Journal of Geophysical Research Atmospheres，1967，72：5 117-5 131. " target="_blank">
[14]	TAKAHASHI M，KOIDE H. Effect of the intermediate principal stress on strength and deformation behavior of sedimentary rocks at the depth shallower than 2 000 m[C]// International Symposium on Rock at Great Depth. [S.l.]：[s.n.]，1989：19-26.. " target="_blank">
[20]	HANDIN J，HEARD H C，MAGOUIRK J N. Effects of the intermediate principal stress on the failure of limestone，dolomite，and glass at different temperatures and strain rates[J]. Journal of Geophysical Research Atmospheres，1967，72(2)：320-322. " target="_blank">
[25]	LADE P V. Rock strength criteria：the theories and the evidence[C]// Comprehensive Rock Engineering. London：[s.n.]，1993：225-284. " target="_blank">
[1]	QIN S Q，JIU J J，TANG C A，et al. Instability leading to coal bumps and nonlinear evolutionary mechanisms for a coal-pillar-and-roof system[J]. International Journal of Solids and Structures，2006，43(25)：7 407-7 423. " target="_blank">
[12]	左建平，谢和平，孟冰冰，等. 煤岩组合体分级加卸载特性的试验研究[J]. 岩土力学，2011，32(5)：1 287-1 296.(ZUO Jianping，XIE Heping，MENG Bingbing，et al. Experimental research on loading-unloading behavior of coal-rock combination bodies at different stress levels[J]. Rock and Soil Mechanics，2011，32(5)：1 287-1 296.(in Chinese))
[23]	WIEBOLS G A，COOK N G W. An energy criterion for the strength of rock in polyaxial compression[J]. International Journal of Rock Mechanics and Mining Sciences，1968，5(6)：529-549. " target="_blank">
[2]	TALIERCIO A，LANDRIANI G S. A failure condition for layered rock[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1988，25(5)：299-305. " target="_blank">
[13]	HUANG B X，LIU J W. The effect of loading rate on the behavior of samples composed of coal and rock[J]. International Journal of Rock Mechanics and Mining Sciences，2013，61：23-30. " target="_blank">
[15]	KWASNIEWSKI M. Effect of confining pressure，intermediate principal stress and minimum principal stress on the mechanical behavior of a sandstone[C]// 11th Congress of the International Society for Rock Mechanics. [S.l]：[s.n.]，2007：237-242. " target="_blank">
[17]	HANDIN J，HEARD H C，MAGOUIRK J N. Effects of the intermediate principal stress on the failure of limestone，dolomite，and glass at different temperatures and strain rates[J]. Journal of Geophysical Research Atmospheres，1967，72(2)：320-322. " target="_blank">
[19]	YANG X L，ZOU J F，SUI Z R. Effects of intermediate principal stress on rock cavity stability[J]. Journal of Central South University of Technology，2007，14(Supp.1)：165-169. " target="_blank">
[21]	EWY R T. Wellbore-stability predictions by use of a modified lade criterion[J]. SPE Drilling and Completion，1999，14(2)：85-91. " target="_blank">
[24]	HAIMSON B C，CHANG C. A new true triaxial cell for testing mechanical properties of rock，and its use to determine rock strength and deformability of Westerly granite[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(1)：285-296. " target="_blank">
[26]	LADE P V. Failure criterion for frictional materials[C]// DESAI C S，GALLAGHER R H，eds. Mechanics of Engineering Materials. [S.l.]：John Wiley and Sons Ltd.，1984：385-402. " target="_blank">
[28]	尹光志，李铭辉，许江，等. 多功能真三轴流固耦合试验系统的研制与应用[J]. 岩石力学与工程学报，2015，34(12)：2 436-2 445. (YIN Guangzhi，LI Minghui，XU Jiang，et al. A new multi-functional true triaxial fluid-solid coupling experiment system and its applications[J]. Chinese Journal of Rock Mechanics and Engineering，2015，34(12)：2 436-2 445.(in Chinese))
[6]	ATTEWELL P B，SANFORD M R. Intrinsic shear strength of a brittle anisotropic rock-II[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts，1974，11(11)：431-438. " target="_blank">
[10]	LI Y P，LIU W，YANG C H，et al. Experimental investigation o mechanical behavior of bedded rock salt containing inclined interlayer[J]. International Journal of Rock Mechanics and Mining Sciences，2014，69(3)：39-49. " target="_blank">