Abstract:Different heating paths produce the different heating effects. The power and the heating time are the important parameters influencing the rock fragmentation. The microwave heating tests were conducted to the cubic and cylindrical basalt samples under three different heating paths and the P-wave velocity and UCS were measured before and after the microwave treatment. The sample burst into fragments when the thermal stress within the sample exceeds the ultimate strength of the rock. The sample was largely melt when the temperature in the sample exceeded the melting point. When a high microwave power was applied,the sample burst into fragments in shorter time and consumed low energy. The P-wave velocity and UCS had a significant reduction before the sample burst. The higher the power,the shorter the burst time and the faster the strength reduction. Therefore,the high power microwave can be used in rock fragmentation or assisted mechanical rock breakage with significantly decrease in energy consumption.
李元辉,卢高明,冯夏庭,张希巍. 微波加热路径对硬岩破碎效果影响试验研究[J]. 岩石力学与工程学报, 2017, 36(6): 1460-1468.
LI Yuanhui,LU Gaoming,FENG Xiating,ZHANG Xiwei. The influence of heating path on the effect of hard rock fragmentation using microwave assisted method. , 2017, 36(6): 1460-1468.
李夕兵,周子龙,王卫华. 岩石破碎工程发展现状与展望[R]. 北京:[s. n.],2010.(LI Xibing,ZHOU Zilong,WANG Weihua. The status and prospect of development in rock fargmentation engineering[R]. Beijing:[s. n.],2010.(in Chinese))
Your browse does not support frame!