液压支架群组支护原理与承载特性

doi:10.13722/j.cnki.jrme.2016.0706

摘要
图/表
参考文献(32)
相关文章 (15)

全文: PDF (2282 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

根据液压支架支护特性，建立液压支架群组弹性基础梁力学模型，得出顶板挠度与支护阻力解析关系式，在此基础上研究不同巷帮条件、支架刚度、顶板岩性、岩厚、采高等参数对顶板下沉量和液压支架支护阻力的影响，分析支架上方顶板来压特性与工作面长度的关系，解释普通长度工作面顶板来压特性以及超长工作面顶板来压规律。实例表明，基于弹性基础梁的液压群组计算模型具有实用价值，可以揭示液压支架群组支护阻力以及工作面支架上方顶板挠度变化情况与岩层破断规律。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	徐亚军1
	2
	王国法1
	2

关键词 ：采矿工程, 液压支架, 长壁工作面, 弹性基础梁, 工作面长度

Abstract：

According to the supporting characteristics of powered support，this paper constructed the elastic foundation-beam model where the powered support groups are treated as elastic foundation，derived the formula of supporting resistance and roof deflection. Based on which，this paper studied the key parameters，such as the different stiffness of powered support，roof rock，roof thickness，mining height，beam end conditions and so on，how to influence the roof subsidence displacement and supporting resistance，analyzed the relationship between the roof deflection and the length of the mining face，and explained the pressure characteristics of the normal length mining face and the pressure law of the super length mining face. Results show that the elastic foundation calculation model has practical value，it can reveal the supporting resistance of powered support groups，calculate the change of roof deflection and explain the law of roof rock broken.

Key words： mining engineering powered support longwall mining face elastic foundation beam face length

引用本文:

徐亚军1，2，王国法1，2. 液压支架群组支护原理与承载特性[J]. 岩石力学与工程学报, 2017, 36(S1): 3367-3373.
XU Yajun1，2，WANG Guofa1，2. Supporting principle and bearing characteristics of hydraulic powered roof support groups. , 2017, 36(S1): 3367-3373.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2016.0706 或 https://rockmech.whrsm.ac.cn/CN/Y2017/V36/IS1/3367

[1]	王国法. 工作面支护与液压支架技术理论体系[J]. 煤炭学报，2014，39(8)：1 593-1 601.(WANG Guofa. Theory system of working face support system and hydraulic roof support technology[J]. Journal of China Coal Society，2014，39(8)：1 593-1 601.(in Chinese))
[2]	葛世荣. 智能化采煤装备的关键技术[J]. 煤炭科学技术，2014，42(9)：7-11.(GE Shirong. Key technology of intelligent coal mining equipment[J]. Coal Science and Technology，2014，42(9)：7-11.(in Chinese))
[3]	缪协兴，钱鸣高. 超长综放工作面覆岩关键层破断特征及对采场矿压的影响[J]. 岩石力学与工程学报，2003，22(1)：45-47.(MIAO Xiexing，QIAN Minggao. Broken feature of key strata and its influence on rock pressure in super-length fully-mechanized coal face[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(1)：45-47.(in Chinese))
[4]	SYD S P. 长壁开采[M]. 郭文兵译. 北京：科学出版社，2011：136-139.( SYD S P. Longwall mining[M]. Translated by GUO Wenbing. Beijing：Science Press，2011：136-139.(in Chinese))
[5]	YASITLI N E，UNVER B. 3D numerical modeling of longwall mining with top-coal caving[J]. International Journal of Rock Mechanics and Mining Sciences，2005，42(2)：219-235.
[6]	TRUEMAN R，LYMAN G，COCKER A. Longwall roof control through a fundamental understanding of shield-strata interaction[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(2)：371-380.
[7]	TRUEMAN R，THOMAS R，HOYER D. Understanding the causes of roof control problems on a longwall face from shield monitoring data-a case study[C]// The 11th Underground Coal Operators Conference. Wollongong：University of Wollongong and the Australasian Institute of Mining and Metallurgy，2011：40-47.
[8]	DAVID I H. Early warning of longwall weighting events and roof cavities using[C]// The 30th International Conference on Ground Control in Mining. [S.l.]：[s.n.]，2011：207-213.
[9]	MANOJ K，DEEPAK A，RAO B. Evaluation of mine scale longwall top coal caving parameters using continuum analysis[J]. Mining Science and Technology，2011，21(6)：787-796.
[10]	杨永康，李建胜，康天合，等. 浅埋厚基岩松软顶板综放采场矿压特征工作面长度效应[J]. 岩土工程学报，2012，34(4)：709-715.(YANG Yongkang，LI Jiansheng，KANG Tianhe，et al. Effect of working face length on underground pressure characteristics by fully-mechanized top-coal caving mining under shallow-buried thick bedrock loose roof[J]. Chinese Journal of Geotechnical Engineering，2012，34(4)：709-715.(in Chinese))
[11]	任艳芳. 浅埋深近距离煤层矿压及覆岩运动规律研究[J]. 煤炭科学技术，2015，43(7)：11-14.(REN Yanfang. Study on mine pressure and overlying strata movement law of contiguous seams with shallow depth[J]. Coal Science and Technology，2015，43(7)：11-14.(in Chinese))
[12]	徐亚军，王国法，任怀伟. 液压支架与围岩刚度耦合理论与应用[J]. 煤炭学报，2015，40(11)：2 528-2 533.(XU Yajun，WANG Guofa，REN Huaiwei. Theory of coupling relationship between surrounding rocks and powered support[J]. Journal of China Coal Society，2015，40(11)：2 528-2 533.(in Chinese))
[13]	范金成，蒋斌松，张强. 煤巷侧帮压力及锚杆参数计算[J]. 采矿与安全工程学报，2015，32(4)：559-563.(FAN Jincheng，JIANG Binsong，ZHANG Qiang. Analytical calculation of the pressure in coal roadway sidewall and the bolt parameters[J]. Journal of Mining and Safety Engineering，2015，32(4)：559-563.(in Chinese))
[14]	姜福兴，刘金海，王平. 基于Druker-Parger准则的煤层冲击失稳模型[J]. 煤炭学报，2011，36(5)：727-731.(JIANG Fuxing，LIU Jinhai，WAGN Ping. Model of coal burst and instability based on Druker-Prager yield criterion[J]. Journal of China Coal Society，2011，36(5)：727-731.(in Chinese)
[15]	马庆云，赵晓东，宋振骐. 采场老顶岩梁的超前破断与矿山压力[J]. 煤炭学报，2001，26(5)：473-477.(MA Qingyuan，ZHAO Xiaodong，SONG Zhenqi. Break of main roof ahead of workface and ground pressure[J]. Journal of China Coal Society，2001，26(5)：473-477.(in Chinese))
[16]	吴梵，朱锡，梅志远. 船舶结构力学[M]. 北京：国防工业出版社，2010：41-47.(WU Fan，ZHU Xi，MEI Zhiyuan. Ship structural mechanics[M]. Beijing：National Defence Industry Press，2010：41-47.(in Chinese))
[17]	陈铁云，陈伯真. 船船结构力学[M]. 上海：上海交通大学出版社，1991：32-36.(CHEN Tieyun，CHEN Bozhen. Ship structural mechanics[M]. Shanghai：Shanghai Jiaotong University Press，1991：32-36.(in Chinese))
[18]	王赞芝，曹建军，胡如成，等. 广义支承端弹性地基梁的基本解及应用[J]. 辽宁工程技术大学学报：自然科学版，2010，29(6)：1 086-1 089.(WANG Zanzhi，CAO Jianjun，HU Rucheng，et al. Basic solution and its application to beam on elastic foundation with generalized bearings[J]. Journal of Liaoning Technology Universtiy：Natural Science，2010，29(6)：1 086-1 089.(in Chinese))
[19]	李华东，朱锡，梅志远，等. 两结点简支的弹性基础梁框架的变形分析[J]. 力学与实践，2011，33(1)：29-34.(LI Huadong，ZHU Xi，MEI Zhiyuan，et al. Deformation analysis on elastic foundation frame with two simply supported nodes[J]. Mechanics in Engineering[J]，2011，33(1)：29-34.(in Chinese))
[20]	俞铭华. 船舶结构弹性固定端的处理方法[J]. 镇江船舶学院学报，1992，6(2)：1-7.(YU Minghua. Processing method for elastic fixed end of ship structure[J]. Journal of Jiangsu Marine College，1992，6(2)：1-7.(in Chinese))
[21]	舒恒煜，谭林森. 船舶结构力学[M]. 武汉：华中科技大学出版社，2011：26-28.(SHU Hengyu，TAN Linsen. Ship structural mechanics[M]. Wuhan：Huazhong University of Science and Technology Press，2011：26-28.(in Chinese))
[22]	YUAN Y，TU S H，WANG F T，et al. Hydraulic support instability mechanism and its control in a fully-mechanized steep coal seam working face with large mining height[J]. Journal of the Southern African Institute of Mining and Metallurgy，2015，115(5)：441-447.
[23]	徐亚军. 液压支架顶梁外载作用位置理论研究与应用[J]. 煤炭科学技术，2015，43(7)：102-106.(XU Yajun. Research and application external load position of powered support¢s canopy[J]. Coal Science and Technology，2015，43 (7)：102-106.(in Chinese))
[24]	余寿文，冯西桥. 损伤力学[M]. 北京：清华大学出版社，1997：26-28.(YU Shouwen，FENG Xiqiao. Damage mechanics[M]. Beijing：Tsinghua University Press，1997：26-28.(in Chinese))
[25]	XU Y J，WANG G F. The reasonable analytical value of canopy aspect ratio of the two-leg shield powered support[C]// The 30th Annual International Pittsburgh Coal Conference. [S.l.]：[s.n.]，2013：4 134-4 146.
[26]	徐亚军. 两柱掩护式液压支架围岩耦合关系研究及相关参数优化[博士学位论文][D]. 煤炭科学研究总院，2013.(XU Yajun. Study on parameter optimization and coupling relation between surrounding rock and 2-leg powered support[Ph. D. Thesis][D]. Beijing：China Coal Research Institute，2013.(in Chinese))
[27]	李新元，马念杰，钟亚平，等. 坚硬顶板断裂过程中弹性能量积聚与释放的分布规律[J]. 岩石力学与工程学报：2007，26(Supp.1)：2 786-2 793.(LI Xinyuan，MA Nianjie，ZHONG Yaping，et al. Storage and release regular of elastic energy distribution in tight roof fracturing[J]. Chinese Journal of Rock Mechanics and Engineering：2007，26(Supp.1)：2 786-2 793.(in Chinese))
[28]	吕梦蛟. 神东矿区长壁采场矿压显现规律与支架选型[J]. 煤炭科学技术，2010，38(11)：48-52.(LU Mengjiao. Strata pressure behavior law and powered support selection of longwall coal mining face of Shendong mining area[J]. Coal Science and Technology，2010，38(11)：48-52.(in Chinese))
[29]	曹胜根，缪协兴. 超长综放工作面采场矿山压力控制[J]. 煤炭学报，2001，26(6)：621-625.(CAO Shenggen，MIAO Xiexing. Ground pressure controlling on super-length fully-mechanized mining face with top-coal caving[J]. Journal of China Coal Society，2001，26(6)：621-625.(in Chinese))
[30]	李旭东. 寺河矿大采高超长工作面矿压显现规律实测研究[J]. 能源与节能，2011，67(4)：85-87.(LI Xudong. Study on the coal pressure appearance rule of large cutting height and super length workface in Sihe coal mine[J]. Energy and Energy Conservation，2011，67(4)：85-87.(in Chinese))
[31]	王庆雄，鞠金峰. 450 m超长综采工作面矿压显现规律研究[J]. 煤炭科学技术，2014，42(3)：125-128.(WANG Qingxiong，JU Jinfeng. Study on mine strata pressure behavior of 450 m ultra long fully-mechanized coal mining face[J]. Coal Science and Technology，2014，42(3)：125-128.(in Chinese))
[32]	宋立兵，王庆雄. 国内首个450 m超长综采工作面安全开采技术研究[J]. 煤炭工程，2014，46(3)：45-51.(SONG Libing，WANG Qingxing. Study on safety technology of China first 450 m ultra long fully mechanized coal face[J]. Coal Engineering，2014，46(3)：45-51.(in Chinese))