综放开采散体顶煤放出三维模拟试验台的研制与应用

doi:10.13722/j.cnki.jrme.2014.0620

摘要
图/表
参考文献(23)
相关文章 (15)

全文: PDF (1794 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

针对以往顶煤放出模拟试验台不能真实模拟顶煤三维放出过程的不足，介绍自主研发的综放开采散体顶煤放出三维模拟试验台，试验台主要由试验箱体、移架与放煤系统、倾角调节与监测系统、标志颗粒制作与安设系统、箱体支座及附属装置组成。该试验台具有如下功能：(1) 三维设计扩展了普通二维试验台在工作面方向的长度，可更加真实地模拟顶煤三维放出过程。(2) 通过对综放支架进行细部设计，可模拟开关放煤口和移架过程。(3) 利用倾角调节与监测系统，可模拟煤层走向与倾向方向0°～55°范围内任意角度的顶煤三维放出过程。(4) 可以在模拟工作面端头损失条件下进行不同煤矸粒径、不同采放比、不同放煤顺序和移架速度的模拟试验。(5) 通过在煤层中安设标志颗粒，实现顶煤回收率的测定以及顶煤三维放出体发育过程的反演。利用该试验台进行仰斜综放散体顶煤放出三维模拟试验，揭示了仰采条件下顶煤回收率、顶煤放出体以及煤–岩分界线的特征。试验结果表明，该试验台能够真实地模拟顶煤放出过程，为从三维角度研究综放开采顶煤放出机制提供了新的试验方法和手段。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张锦旺1
	2
	潘卫东1
	2
	李兆龙1
	2
	宋正阳1
	2

关键词 ：采矿工程, 综放开采, 试验台, 放出机制, 放出体, 回收率

Abstract：

Due to the defects of simulation test device that can not precisely simulate the 3D top-coal drawing process，a self-developed 3D simulation test device for loose top-coal drawing is introduced. It is composed of test box，shield-moving and coal-drawing system，angle adjusting and monitoring system，marked particles making and locating system，box bracket and accessories. The functions of the test device are introduced as follows. The 3D test device extends the length of mining face direction compared with the 2D test device. This design can simulate the top-coal 3D drawing process precisely. By thorough design of caving shield，shield-moving and coal-drawing process can be simulated. By using angle adjusting and monitoring system，this device can simulate the inclination of coal seam both in strike and dip direction and the inclination angle is from 0° to 55°. This test device can realize the simulation of different particle sizes，caving ratios，drawing order and shield-moving speed in the condition of top-coal end loss. By locating marked particles in coal seam，the statistics of top-coal recovery and the inversion of drawing body can be realized. By using the test device，3D simulation tests for loose top-coal movement in up-dip caving condition are carried out. The top-coal recovery ratio，top-coal drawing body and the characteristic of boundary between coal and rock are obtained from tests. The test results show that the test device can simulate the top-coal drawing process precisely. It also provides a new method to study the drawing mechanism of loose top-coal in three-dimensions.

Key words： mining engineering top-coal caving test device drawing mechanism drawing body recovery ratio

引用本文:

张锦旺1，2，潘卫东1，2，李兆龙1，2，宋正阳1，2. 综放开采散体顶煤放出三维模拟试验台的研制与应用[J]. 岩石力学与工程学报, 2015, 34(S2): 3871-3879.
ZHANG Jinwang1，2，PAN Weidong1，2，LI Zhaolong1，2，SONG Zhengyang1，2. DEVELOPMENT AND APPLICATION OF 3D SIMULATION TEST DEVICE FOR LOOSE TOP-COAL DRAWING UNDER CAVING MINING TECHNIQUE. , 2015, 34(S2): 3871-3879.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2014.0620 或 https://rockmech.whrsm.ac.cn/CN/Y2015/V34/IS2/3871

[1]	王家臣. 厚煤层开采理论与技术[M]. 北京：冶金工业出版社，2009：47-51.(WANG Jiachen. The theory and technique on the thick coal seam mining[M]. Beijing：Metallurgical Industry Press，2009：47-51.(in Chinese))
[2]	王家臣. 我国综放开采技术及其深层次发展问题的探讨[J]. 煤炭科学技术，2005，33(1)：14-17.(WANG Jiachen. Fully mechanized longwall top coal caving technology in China anddiscussion on issues of further development[J]. Coal science and technology，2005，33(1)：14-17.(in Chinese))
[3]	YASITLI NE，UNVER B. 3Dnumerical modeling of longwall mining with top-coal caving[J].International Journal of Rock Mechanics and Mining Sciences，2005，42(2)：219-235.
[4]	陈忠辉，谢和平，王家臣. 综放开采顶煤三维变形、破坏的数值分析[J]. 岩石力学与工程学报，2002，21(3)：309-313.(CHENZhonghui，XIE Heping，WANG Jiachen. Numerical simulation ofthree-dimensional deformation and failure of top coal caving[J].Chinese Journal of Rock Mechanics and Engineering，2002，21(3)：309-313.(in Chinese))
[5]	富强，闫少宏，吴健. 综放开采松软顶煤落放规律的理论研究[J].岩石力学与工程学报，2002，21(4)：568-572.(FU Qiang，YAN Shaohong，WU Jian. Theoretical research on loose top-coal drawing of longwall sublevel caving mining[J]. Chinese Journal of Rock Mechanics andEngineering，2002，21(4)：568-572.(in Chinese))
[6]	吴健，张勇. 关于长壁放顶煤开采基础理论的研究[J]. 中国矿业大学学报，1998，27(4)：332-335.(WU Jian，ZHANG Yong. Study on the basic theoryof longwall top-coal caving system[J]. Journal of China University of Mining andTechnology，1998，27(4)：332-335.(in Chinese))
[7]	WANG JC，YANG SL，LI Y，et al. Caving mechanisms of loose top-coal in longwall top-coal caving mining method[J].International Journal of Rock Mechanics and Mining Sciences，2014，71(10)：160-170.
[8]	姜福兴. 单体支柱放顶煤模拟研究[J]. 山东矿业学院学报，1990，9(4)：339-342.(JIANG Fuxing. Similar material simulation research of sublevel caving with props in long wall faces[J]. Journal of Shandong Mining Institute，1990，9(4)：339-342.(in Chinese))
[9]	魏锦平，李胜利，靳钟铭. 综放采场顶煤压裂机制的实验研究[J]. 岩石力学与工程学报，2002，21(8)：1 178-1 182.(WEI Jinping，LI Shengli，JIN Zhongming. Testing study on cracking mechanism of top-coal under abutment pressure[J]. Chinese Journal of Rock Mechanics andEngineering，2002，21(8)：1 178-1 182.(in Chinese))
[10]	白义如，白世伟，靳钟铭，等. 特厚煤层分层放顶煤相似材料模拟试验研究[J]. 岩石力学与工程学报，2001，20(3)：365-369.(BAI Yiru，BAI Shiwei，JIN Zhongming，etal. Testing study of similar material for layer-divided top coal caving in specially thick coal seam[J]. Chinese Journal of Rock Mechanics and Engineering，2001，20(3)：365-369.(in Chinese))
[11]	康天合，柴肇云，李义宝，等. 底层大采高综放全厚开采20m特厚中硬煤层的物理模拟研究[J]. 岩石力学与工程学报，2007，26(5)：1 065-1 072.(KANG Tianhe，CHAI Zhaoyun，LI Yibao，et al.Study on physical simulation of full-seam mining for a 20 m verythick and medium hard seam by sub-level caving mining with highbottom cutting height[J]. Chinese Journal of Rock Mechanics andEngineering，2007，26(5)：1 065-1 072.(in Chinese))
[12]	黄炳香，刘长友，程庆迎. 低位综放开采顶煤放出率与含矸率的关系[J]. 煤炭学报，2007，32(8)：789-793(HUANG Bingxiang，LIU Changyou，CHENGQingying. Relation between top-coal drawing ratioand refuse content for fully mechanized top coal caving[J]. Journal of China Coal Society，2007，32(8)：789-793.(in Chinese))
[13]	翟新献. 放顶煤工作面顶板岩层移动相似模拟研究[J]. 岩石力学与工程学报，2002，21(11)：1667-1671.(ZHAI Xinxian. Simulationtesting study on roof strata displacement oftop-coal caving face[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(11)：1667-1671.(in Chinese))
[14]	来兴平，程文东，刘占魁. 大倾角综采放顶煤开采数值计算及相似模拟分析[J]. 煤炭学报，2003，28(2)：117-120.(LAIXingping，CHENG Wendong，LIU Zhankui. Hybrid evaluation on numerical computing and similar simulationof steep dip angle and top coal mining[J]. Journal of China Coal Society，2003，28(2)：117-120.(in Chinese))
[15]	黄炳香，刘长友，牛宏伟，等. 大采高综放开采顶煤放出的煤矸流场特征研究[J]. 采矿与安全工程学报，2008，25(4)：415-419. (HUANG Bingxiang，LIU Changyou，NIU Hongwei，et al. Research on coal-gangue flow field character resulted fromgreat cutting height fully mechanized top coal caving[J]. Journal of Mining andSafety Engineering，2008，25(4)：415-419.(in Chinese))
[16]	王家臣，李志刚，陈亚军，等. 综放开采顶煤放出散体介质流理论的试验研究[J]. 煤炭学报，2004，29(3)：260-263.(WANG Jiachen，LI Zhigang，CHEN Yajun，et al. The experimental study of loose medium flowfield on the longwall top- coal caving[J]. Journal of China Coal Society，2004，29(3)：260-263.(in Chinese))
[17]	黄炳香，刘长友，吴锋锋，等. 极松散细砂岩顶板下放煤工艺散体模型试验研究[J]. 中国矿业大学学报，2006，35(3)：351-355.(HUANG Bingxiang，LIU Changyou，WU Fengfeng，et al. Experimental research on drawing top-coal with loose medium model under dead-unconsolidated sandstone roof[J].Journal of China Universityof Mining andTechnology，2006，35(3)：351-355.(in Chinese))
[18]	王向伦，李浩荡，韩桂武. 放顶煤开采工艺的三维相似模拟[J]. 采矿技术，2004，4(2)：7-9.(WANGXianglun，LIHaodang，HANGuiwu. Three-dimensional similar simulation. of caving mining technology[J]. Mining Technology，2004，4 (2)：7-9.(in Chinese))
[19]	王家臣，富强. 低位综放开采顶煤放出的散体介质流理论与应用[J].煤炭学报，2002，27(4)：337-341.(WANG Jiachen，FU Qiang. Low top-coal caving off the loose medium flow theory and application[J]. Journal of China Coal Society，2002，27(4)：337-341.(in Chinese))
[20]	王家臣，杨建立，刘颢颢，等. 顶煤放出散体介质流理论的现场观测研究[J]. 煤炭学报，2010，35(3)：353-356.(WANG Jiachen，YANGJianli，LIUHaohao，et al. The pratical observationresearch on loose medium flow field theoryon the top-coal caving[J]. Journal of China Coal Society，2010，35(3)：353-356.(in Chinese))
[21]	WANG JC，ZHANG JW，SONG ZY，et al. Three-dimensional experimental study of loose top-coal drawing law for longwall top-coal caving mining technology[J].Journal of Rock Mechanics and Geotechnical Engineering，2015，7(3)：318-326.
[22]	王家臣，魏立科，张锦旺，等. 综放开采顶煤放出规律三维数值模拟[J]. 煤炭学报，2013，38(11)：1 905-1 911.(WANG Jiachen，WEILike，ZHANG Jinwang，et al. 3D numerical simulation on the top-coal movement lawunder caving mining technique[J]. Journal of China Coal Society，2013，38(11)：1905-1911.(in Chinese))
[23]	王家臣，张锦旺. 综放开采顶煤放出规律的BBR 研究[J]. 煤炭学报，2015，40(3)：487-493.(WANGJiachen，ZHANGJinwang. BBR study of top-coal drawing law in longwall top-coal caving mining[J]. Journal of China Coal Society，2015，40(3)：487-493.(in Chinese))