Abstract:Many true triaxial strength criteria for rock have been proposed;however,the true triaxial test data for evaluating the criteria are rare and also needed to verify. Strengths and deformation of Yamaguchi marble and Orikabe monzonite tested by Kiyoo Mogi exhibit strange phenomena:strength does not increase after an increase of 3 while 2 keeps a constant;2 has larger influence than 3 on the bearing capacity in ductile deformation. The abnormal strength property of Laxiwa granite is also discussed. A reasonable conclusion is that specimens compressed under high 3 are endured large axial deformation which may induce significant end effects from platens in 2-direction. The genuine effect of 2 on strength does not enhance with 3 after friction correction.
尤明庆. 端部效应对岩石真三轴压缩强度的影响[J]. 岩石力学与工程学报, 2016, 35(S1): 2603-2607.
YOU Mingqing. End effects on strengths of rocks under true triaxial compression. , 2016, 35(S1): 2603-2607.
MOGI K. Experimental rock mechanics[M]. London:Taylor andFrancis Group,2007:88-99.
[2]
BRUDY M,ZOBACK MD,FUCHS K,et al. Estimation of the complete stress tensor to 8 km depth in the KTB scientific drill holes:implications for crustal strength[J]. Journal of Geophysical Research,1997,102(B8):18 453-18 475.
[3]
HAIMSON B,LIN W,OKU H,et al. Integrating borehole breakout dimensions,strength criteria,and leak-off test results,to constrain the state of stress across the Chelungpu Fault,Taiwan[J]. Tectonophysics,2010,482(1):65-72.
[4]
MOGI K. Effect of the intermediate principal stress on rock failure[J]. Journal of Geophysical Research,1967,72(20):5117-5131.
[5]
LI X,SHI L,BAI B,et al. True-triaxial testing techniques of rocks - State of the art and future perspectives[C]// True Triaxial Testing of Rocks. KWASNIEWSKI M,LI X,TAKAHASHI M,ed. London:CRC Press,2012:3-18.
[6]
许东俊,幸志坚,李小春,等. RT3型岩石高压真三轴仪的研制[J]. 岩土力学,1990,11(2):1-14.(XU Dongjun,XING Zhijian,LI Xiaochun,et al. Development of RT3 type rock high pressure true triaxial machine[J]. Rock and Soil Mechanics,1990,11(2):1-14.(in Chinese))
[7]
HAIMSON B,CHANG C. A new true triaxial cell for testing mechanical properties of rock,and its use to determine rock strength and deformability of Westerly granite[J]. International Journal of Rock Mechanics and Mining Sciences,2000,37(3):285-296.
[8]
LEE H,HAIMSON B. True triaxial strength,deformability,and brittle failure of granodiorite from the San Andreas Fault Observatory at Depth[J]. International Journal of Rock Mechanics and Mining Sciences,2011,48(6):1199-1207.
[9]
TAKAHASHI M,KOIDE H. Effect of the intermediate principal stress on strength and deformation behavior of sedimentary rocks at the depth shallower than 2000 m[C]//Rock at Great Depth.MAURY V,FOURMAINTRAUX D,ed. Rotterdam:Balkema,1989:19-26.
[10]
KWA?NIEWSKI M,TAKAHASHI M. Effect of confining pressure,intermediate principal stress and minimum principal stress on the mechanical behavior of a sandstone[C]//Proc.11th Cong.ISMR. London:TaylorandFrancis Group,2007:237-242.
[11]
李小春,许东俊,刘世煜,等. 真三轴应力状态下拉西瓦花岗岩的强度、变形及破裂特性试验研究[C]// 中国岩石力学与工程学会第三次大会论文集. [S.l.]:[s. n.],1994:153-159.(LI Xiaochun,XU Dongjun,LIU Shihuang,et al. The experimental research of the strength,deformation and failure properties of Laxiwa granite under the status of true triaxial stresses[C]// Proceedings of 3rd Symposium of CSRME. [S.l.]:[s. n.],1994:153-159.(in Chinese))
[12]
俞茂宏. 双剪理论及其应用[M]. 北京:科学出版社,1998:853-858.(YUMaohong. Twin-shear theory and its application[M]. Beijing:Science Press,1998:853-858.(in Chinese))
[13]
尤明庆. 统一强度理论的试验数据拟合及评价[J]. 岩石力学与工程学报,2008,27(11):2 193-2 204.(YOU Mingqing. Fitting and evaluation of test data using unified strength theory[J]. Chinese Journal of Rock Mechanics and Engineering,2008,27(11):2 193-2 204.(in Chinese))
[14]
RAFIAI H. New empirical polyaxial criterion for rock strength[J]. International Journal of Rock Mechanics and Mining Sciences,2011,48(5):922-931.
[15]
YOUM. Comparison of two true-triaxial strength criteria[J]. International Journal of Rock Mechanics and Mining Sciences,2012,54:114-124.
[16]
YOUM. True-triaxial strength criteria for rock[J]. International Journal of Rock Mechanics and Mining Science,2009,46(1):115-127.
[17]
YOUM. Three independent parameters to describe conventional triaxial compression strength of intact rocks[J]. Journal of Rock Mechanics and Geotechnical Engineering,2010,2(4):350-356.
[18]
HAIMSON B. Consistent trends in the true triaxial strength and deformability of cores extracted from ICDP deep scientific holes on three continents[J]. Tectonophysics,2011,503(1):45-51.
[19]
LABUZ J F,BRIDELLJ M. Reducing frictional constraints in compression testing through lubrication[J]. International Journal of Rock Mechanics and Mining Sciences,1993,30(5):451-455.
[20]
尤明庆,苏承东,徐 涛. 岩石试样的加载卸载过程及杨氏模量[J]. 岩土工程学报,2001,23(5):588-592.(YOU Mingqing,SU Chengdong,XU Tao. Loading or unloading process in axial direction and Young¢s modulus of rock specimen[J]. Chinese Journal of Geotechnical Engineering,2001,23(5):588-592.(in Chinese))