岩石真三轴强度与Mohr-Coulomb准则形状函数修正方法研究

doi:10.13722/j.cnki.jrme.2015.0119

摘要
图/表
参考文献(35)
相关文章 (15)

全文: PDF (4188 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要基于颗粒流理论和PFC3D程序，建立Lac du Bonnet花岗岩的BPM模型，施加周期性边界条件。通过使周期性空间扭曲变形，保持恒定的平均应力和Lode角，进行真三轴试验，提出一种修正Mohr-Coulomb准则形状函数的新方法。建立试样的三维强度包络面，并从三轴平面、双轴平面和平面3个角度，探讨Mohr-Coulomb准则的局限性：(1) Mohr-Coulomb准则预测的单轴抗拉强度偏大。(2) Mohr-Coulomb准则未考虑中间主应力的影响。(3) Mohr-Coulomb准则适用范围有限，在范围内，Mohr-Coulomb准则强度偏于保守。探索中间主应力对岩石强度的影响规律，结果表明：当处于低值时，随的增大而增大，而后达到了“平台期”；当处于更高应力状态时，随的增大而减小。通过考虑中间主应力的影响，将Mohr-Coulomb准则形状函数修正为关于平均应力的函数。将拟合的值与修正的Lade-Duncan准则预测值进行比较，结果表明，本文的修正方法比修正的Lade-Duncan准则能更准确地描述岩石的常规三轴强度，研究方法及结论可为岩石强度研究提供有益参考，且具有一定的实际工程意义。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张诗淮
	吴顺川
	吴昊燕

关键词 ：岩石力学, PFC3D, 真三轴试验, 三维破坏包络面, Mohr-Coulomb准则, 形状函数

Abstract：Based on particle flow theory and PFC3D software，a bonded particle model(BPM) for Lac du Bonnet granite is generated and periodic boundary condition is applied. True triaxial tests are conducted by distortion of the periodic space. Constant mean stressand constant Lode angleare maintained. A new method for modifying Mohr-Coulomb criterion shape function is proposed. The three-dimensional failure envelope of sample is determined to study the limitations of Mohr-Coulomb criterion from three aspects：triaxial plane，biaxial plane， plane. The limitations of Mohr-Coulomb criterion are as follows. (1) Uniaxial tension strength predicted by Mohr-Coulomb criterion is higher. (2) Mohr-Coulomb criterion ignores the impact of the intermediate principal stress on strength of rock. (3) In the range of ，strength prediction made by Mohr-Coulomb criterion is smaller. According to the results of numerical tests，impacts of the intermediate principal stress on strength of rock are researched. Results show that，there is a general increase inat the low level ofuntil a plateau is reached. Then value of decreases at a higher level of. After taking impacts of the intermediate principal stress into account，Mohr-Coulomb criterion shape function is modified as a function of mean stress，which can predict the strength of triaxial compression and extension more accurately by comparingobtained from the fitting formula and the modified Lade-Duncan criterion. The research method and conclusion of this paper can provide a useful reference to the study of rock strength and have some practical significance for the engineering project.

Key words： rock mechanics PFC3D true triaxial tests three-dimensional failure envelope Mohr-Coulomb criterion shape function

引用本文:

张诗淮，吴顺川，吴昊燕. 岩石真三轴强度与Mohr-Coulomb准则形状函数修正方法研究[J]. 岩石力学与工程学报, 2016, 35(S1): 2608-2619.
ZHANG Shihuai，WU Shunchuan，WU Haoyan. Study of true triaxial strength of rock and modified method of Mohr-Coulomb criterion shape function. , 2016, 35(S1): 2608-2619.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2015.0119 或 https://rockmech.whrsm.ac.cn/CN/Y2016/V35/IS1/2608

[1] FJÆR E，RUISTUEN H. Impact of the intermediate principal stress on the strength of heterogeneous rock[J]. Journal of Geophysical Research：Solid Earth (1978–2012)，2002，107(B2)：1–3.

[2] HANDIN J，HEARD H A，MAGOUIRK J N. Effects of the intermediate principal stress on the failure of limestone，dolomite，and glass at different temperatures and strain rates[J]. Journal of Geophysical Research，1967，72(2)：611–640.

[3] MOGI K. Fracture and flow of rocks under high triaxial compression[J]. Journal of Geophysical Research，1971，76(5)：1 255–1 269.

[4] TAKAHASHI M，KOIDE H. Effect of the intermediate principal stress on strength and deformation behavior of sedimentary rocks at the depth shallower than 2000 m[C]// International Society for Rock Mechanics. [S.l.]：[s.n.]，1989：19–26.

[5] CHANG C，HAIMSON B. True triaxial strength and deformability of the German Continental Deep Drilling Program(KTB) deep hole amphibolite[J]. Journal of Geophysical Research：Solid Earth (1978–2012)，2000，105(B8)：18 999–19 013.

[6] HAIMSON B，CHANG C. A new true triaxial cell for testing mechanical properties of rock，and its use to determine rock strength and deformability of Westerly granite[J]. International Journal of Rock Mechanics and Mining Sciences，2000，37(1)：285–296.

[7] COLMENARES L B，ZOBACK M D. A statistical evaluation of intact rock failure criteria constrained by polyaxial test data for five different rocks[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(6)：695–729.

[8] WANG Y，TONON F. Modeling Lac du Bonnet granite using a discrete element model[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(7)：1 124–1 135.

[9] PARK J，SONG J. Numerical simulation of a direct shear test on a rock joint using a bonded-particle model[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(8)：1 315–1 328.

[10] KAZERANI T，ZHAO J. Micromechanical parameters in bonded particle method for modelling of brittle material failure[J]. International Journal for Numerical and Analytical Methods in Geomechanics，2010，34(18)：1 877–1 895.

[11] YOON J. Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(6)：871–889.

[12] CHO N，MARTIN C D，SEGO D C. A clumped particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(7)：997–1 010.

[13] POULSEN B A，ADHIKARY D P. A numerical study of the scale effect in coal strength[J]. International Journal of Rock Mechanics and Mining Sciences，2013，63：62–71.

[14] ALBERT R A，RUDNICKI J W. Finite element simulations of Tennessee marble under plane strain laboratory testing：effects of sample-platen friction on shear band onset[J]. Mechanics of Materials，2001，33(1)：47–60.

[15] PARRINELLO M，RAHMAN A. Polymorphic transitions in single crystals：a new molecular dynamics method[J]. Journal of Applied Physics，1981，52(12)：7 182–7 190.

[16] CUNDALL P A. Computer simulations of dense sphere assemblies[C]// Micromechanics of Granular Materials. Amsterdam：Elsevier，1988：113–123.

[17] RADJAI F，ROUX S. Turbulentlike fluctuations in quasistatic flow of granular media[J]. Physical Review Letters，2002，89(6)：064302.

[18] AGNOLIN I，ROUX J. Internal states of model isotropic granular packings. I. Assembling process，geometry，and contact networks[J]. Physical Review E，2007，76(6)：61302.

[19] EMAM S. Distortion of the Periodic Space in PFC[R]. [S.l.]：Itasca Consulting Group，2009.

[20] LADE P V. Modelling the strengths of engineering materials in three dimensions[J]. Mechanics of Cohesive-Frictional Materials，1997，2(4)：339–356.

[21] NAYAK G C，ZIENKIEWICZ O C. Convenient form of stress invariants for plasticity[J]. Journal of Structural Division，ASCE，1972，98(ST 4)：949–954.

[22] LEE Y，PIETRUSZCZAK S，CHOI B. Failure criteria for rocks based on smooth approximations to Mohr-Coulomb and Hoek-Brown failure functions[J]. International Journal of Rock Mechanics and Mining Sciences，2012，56：146–160.

[23] JIANG J，PIETRUSZCZAK S. Convexity of yield loci for pressure sensitive materials[J]. Computers and Geotechnics，1988，5(1)：51–63.

[24] POTYONDY D O，CUNDALL P A. A bonded-particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(8)：1 329–1 364.

[25] ITASCA. PFC^3D(particle flow code in 3 dimensions) fish in PFC3D[M]. [S.l.]：Itasca Consulting Group，2008：3–33–3–35.

[26] SCHÖPFER M，CHILDS C，MANZOCCHI T. The failure envelope of a bonded particle model for rock in three-dimensional stress space[C]// Continuum and Distinct Element Numerical Modeling in Geomechanics——3rd International FLAC/DEM Symposium. [S.l.]：[s.n.]，2013：1–8.

[27] THORNTON C. Numerical simulations of deviatoric shear deformation of granular media[J]. Géotechnique，2000，50(1)：43–53.

[28] MARTIN C D. The strength of massive Lac du Bonnet granite around underground openings[Ph. D. Thesis][D]. Manitoba：University of Manitoba，1993.

[29] KIM M K，LADE P V. Modelling rock strength in three dimensions[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1984：21–33.

[30] WIEBOLS G A，COOK N. An energy criterion for the strength of rock in polyaxial compression[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1968，5(6)：529–549.

[31] DRJ O. HINTON E. Finite elements in plasticity，theory and practice[M]. New York：[s.n.]，1980：1 119.

[32] 高红. 岩土材料屈服破坏准则研究[博士学位论文][D]. 武汉：中国科学院武汉岩土力学研究所，2007.(GAO Hong. Study on the criterion of yield and failure for geomaterials[Ph. D. Thesis][D]. Wuhan：Institute of Rock and Soil Mechanics，Chinese Academy of Sciences，2007.(in Chinese))

[33] SCHÖPFER M P，CHILDS C，MANZOCCHI T. Three-dimensional failure envelopes and the brittle-ductile transition[J]. Journal of Geophysical Research：Solid Earth，2013，118(4)：1 378–1 392.

[34] LADE P V，DUNCAN J M. Elastoplastic stress-strain theory for cohesionless soil[J]. Journal of the Geotechnical Engineering Division，1975，101(10)：1 037–1 053.

[35] LADE P V. Failure criterion for frictional materials[M]. London：Wiley and Sons，1984：385–402.