基于三维激光扫描技术的岩体结构面智能识别与信息提取

doi:10.13722/j.cnki.jrme.2017.0870

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (1293 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The geometric parameters of rock discontinuities are important for stability and permeability analysis of rock mass. The intelligent identification and properties calculation of rock discontinuities based on the improved algorithm of region growing and analytic geometry were made according to the nodded cloud data of exposed rock measured with the terrestrial laser scanning. To identify the rock discontinuities from nodded cloud data effectively，the region growing algorithm was improved by specifying the normal vectors to the nodes as the judgment indicator and setting two thresholds(smoothness detection threshold and region growing threshold ). The orientation，spacing and scale of rock discontinuities can be computed using the analytic geometry. The effects of two thresholds on the identification results were investigated，and a suggestion for threshold selection was provided according to the difference of normal vectors between the adjacent discontinuities. Additionally，the proposed method was applied to two cases，regular planes and road slopes，to verify the robustness of the algorithm.

Key words： rock mechanics terrestrial laser scanning rock discontinuities intelligent identification geometric properties extraction improved region growing

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	GE Yunfeng1
	2
	XIA Ding1
	TANG Huiming1
	3
	ZHAO Binbin4
	WANG Liangqing1
	CHEN Yong1

Cite this article:

GE Yunfeng1,2,XIA Ding1, et al. Intelligent identification and extraction of geometric properties of rock discontinuities based on terrestrial laser scanning[J]. , 2017, 36(12): 3050-3061.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.0870 OR https://rockmech.whrsm.ac.cn/EN/Y2017/V36/I12/3050

[1]	孙广忠. 论“岩体结构控制论”[J]. 工程地质学报，1993，1(1)：14-18.(SUN Guangzhong. On the theory of structure-controlled rockmass[J]. Journal of Engineering Geology，1993，1(1)：14-18.(in Chinese))
[2]	葛云峰，唐辉明，黄磊，等. 岩体结构面三维粗糙度系数表征新方法[J]. 岩石力学与工程学报，2012，31(12)：2 508-2 517.(GE Yunfeng，TANG Huiming，HUANG Lei，et al. A new representation method for three-dimensional joint roughness coefficient of rock joint[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(12)：2 508-2 517.(in Chinese))
[3]	陈祖煜，汪小刚，杨建，等. 岩质边坡稳定分析——原理•方法•程序[M]. 北京：中国水利水电出版社，2005：300-315.(CHEN Zuyu，WANG Xiaogang，YANG Jian，et al. Rock slope stability analysis-theory•methods•programs[M]. Beijing：China Water Power Press，2005：300-315.(in Chinese))
[4]	LI S J，FENG X T，WANG C Y，et al. ISRM suggested method for rock fractures observations using a borehole digital optical televiewer[J]. Rock Mechanics and Rock Engineering，2013，46(3)：635-644.
[5]	HUBBARD B，TISON J，PHILIPPE M，et al. Ice shelf density reconstructed from optical televiewer borehole logging[J]. Geophysical Research Letters，2013，40(22)：5 882-5 887. " target="_blank">
[6]	王凤艳，陈剑平，付学慧，等. 基于VirtuoZo的岩体结构面几何信息获取研究[J]. 岩石力学与工程学报，2008，27(1)：169-175. (WANG Fengyan，CHEN Jianping，FU Xuehui，et al. Study on geometrical information of obtaining rock mass discontinuities based on VirtuoZo[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(1)：169-175.(in Chinese))
[7]	FENG Q，SJOGREN P，STEPHANSSON O，et al. Measuring fracture orientation at exposed rock faces by using a non-reflector total station[J]. Engineering Geology，2001，59(1)：133-146. " target="_blank">
[8]	FEKETE S，DIEDERICHS M，LATO M. Geotechnical and operational applications for 3-dimensional laser scanning in drill and blast tunnels[J]. Tunnelling and Underground Space Technology，2010，25(5)：614-628.
[9]	FEKETE S，DIEDERICHS M. Integration of three-dimensional laser scanning with discontinuous modeling for stability analysis of tunnels in blocky rockmasses[J]. International Journal of Rock Mechanics and Mining Sciences，2013，57：11-23. " target="_blank">
[10]	董秀军. 三维激光扫描技术及其工程应用研究[硕士学位论文][D]. 成都：成都理工大学，2007.(DONG Xiujun. The three-dimensional laser scanning technique and research on its engineering application [M. S. Thesis][D]. Chengdu：Chengdu University of Technology，2007.(in Chinese)) " target="_blank">
[11]	FENG Q J，JINGL J，STEPHANSSON O J，et al. A new approach for geological surveying of exposed rock faces[C]// ISRM International Symposium-2nd Asian Rock Mechanics Symposium. [S. l.]：[s. n.]，2001：139-142. " target="_blank">
[12]	MAERZ N H，YOUSSEF A M，OTOO J N，et al. A simple method for measuring discontinuity orientation from terrestrial LIDAR data[J]. Environmental and Engineering Geoscience，2013，19(2)：185-194.
[13]	SLOB S，VAN K B，HACK R，et al. Method for automated discontinuity analysis of rock slopes with three-dimensional laser scanning[J]. Transportation Research Record：Journal of the Transportation Research Board，2005，1913：187-194. " target="_blank">
[14]	何秉顺，丁留谦，孙平. 三维激光扫描系统在岩体结构面识别中的应用[J]. 中国水利水电科学研究院学报，2007，5(1)：43-48.(HE Bingshun，DING Liuqian，SUN Ping. The application of 3D laser scanning technology in rock joint sets identification[J]. Journal of China Institute of Water Resource and Hydropower Research，2007，5(1)：43-48.(in Chinese))
[15]	GIGLI G，CASAGLI N. Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds[J]. International Journal of Rock Mechanics and Mining Sciences，2011，48(2)：187-198.
[16]	LATO M J，VOGE M. Automated mapping of rock discontinuities in 3D lidar and photogrammetry models[J]. International Journal of Rock Mechanics and Mining Sciences，2012，54：150-158. " target="_blank">
[17]	刘昌军，丁留谦，孙东亚. 基于激光点云数据的岩体结构面全自动模糊群聚分析及几何信息获取[J]. 岩石力学与工程学报，2011，30(2)：358-364.(LIU Changjun，DING Liuqian，SUN Yadong. Automatic fuzzy clustering analysis and geometric information acquisition of rock mass discontinuities based on laser point cloud data[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(2)：358-364.(in Chinese))
[18]	刘昌军，丁留谦，张顺福，等. 基于激光测量和FKM聚类算法的隧洞岩体结构面的模糊群聚分析[J]. 吉林大学学报：地球科学版，2014，44(1)：285-294.(LIU Changjun，DING Liuqian，ZHANG Shunfu，et al. Fuzzy cluster analysis of rock mass discontinuities of tunnel based on laser measurement and FKM clustering algorithm[J]. Journal of Jilin University：Earth Science，2014，44(1)：285-294.(in Chinese))
[19]	RIQUELME A J，ABELLAN A，TOMAS R，et al. A new approach for semi-automatic rock mass joints recognition from 3D point clouds[J]. Computers and Geosciences，2014，68：38-52. " target="_blank">
[20]	ISRM. Suggested methods for the quantitative description of discontinuities in rock masses[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts，1978，15：319-368. " target="_blank">
[21]	KULATILAKE P H S W，BALASINGAM P，PARK J，et al. Natural rock joint roughness quantification through fractal techniques[J]. Geotechnical and Geological Engineering，2006，24(5)：1 181-1 202. " target="_blank">
[22]	MLYNARCZUK M. Description and classification of rock surface by means of laser profilometry and mathematical morphology[J]. International Journal of Rock Mechanics and Mining Sciences，2010，47 (1)：138-149. " target="_blank">
[23]	朱云福. 基于三维激光扫描数据的岩体结构面识别方法研究及系统研制[硕士学位论文][D]. 北京：中国地质大学，2012.(ZHU Yunfu. The theory and system development of discontinuities identification based on 3D laser scanning data[M. S. Thesis][D]. Beijing：China University of Geosciences，2012.(in Chinese)) " target="_blank">
[24]	葛云峰，唐辉明，李伟，等. 基于岩体结构特征的高速远程滑坡致灾范围评价[J]. 地球科学：中国地质大学学报，2016，41(9)：1 583-1 592. (GE Yunfeng，TANG Huiming，LI Wei，et al. Evaluation for deposit areas of rock avalanche base on features of rock mass structure[J]. Earth Science，2016，41(9)：1 583-1 592.(in Chinese))
[25]	RIQUELME A J，ABELLAN A，TOMAS R. Discontinuity spacing analysis in rock masses using 3D point clouds[J]. Engineering Geology，2015，195：185-195. " target="_blank">
[26]	WARBURTON P M. A stereological interpretation of joint trace data[J]. International Journal of Rock Mechanics and Mining Sciences and Geomechancis Abstracts，1980，17(4)：181-190. " target="_blank">
[27]	PRIEST S D，HUDSON J A. Estimation of discontinuity spacing and trace length using scan line surveys[J]. International Journal of Rock Mechanics and Mining Science and Geomechanics Abstract，1981，18(3)：183-197. " target="_blank">
[28]	ZHANG L，EINSTEIN H H. Estimating the mean trace length of rock discontinuities[J]. Rock Mechanics and Rock Engineering，1998，31(4)：217-235. " target="_blank">
[29]	SHU B. Rock slope stability investigations in three dimensions for a part of an open pit mine in USA[Ph. D. Thesis][D]. Tucson：University of Arizona，2014. " target="_blank">
[30]	LATO M J，DIEDERCHS M S，HUTCHINSON D J，et al. Optimization of LiDAR scanning and processing for automated structural evaluation of discontinuities in rockmasses[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(1)：194-199.