孔内立体像对成像技术在孔壁崩落法地应力测量中的应用探讨

doi:10.13722/j.cnki.jrme.2017.1192

Abstract
Figure/Table
References (15)
Related Citation (15)

Download: PDF (523 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract

Deep borehole wall breakout formation is a rupture phenomenon that has been found in almost all rock types. It is usually assumed that breakouts occur in two diametrically opposed zones along the direction of the minimum horizontal in situ stress which is the theoretical foundation of borehole breakout method. The principle of borehole breakout method is discussed in this paper. A new method of measuring borehole wall breakout shape using stereo pair imaging technique is proposed. Describing the imaging principle of stereo pair imaging is in detail，the image processing algorithm is given and the formula for calculating the distance from one point in borehole wall to the center axis is derived. A stereo pair imaging device based on combined double cone mirrors have been developed. The process of imaging test and data analysis is introduced in this paper. Combined with specific examples，the deep in situ stress is calculated by using the data of borehole wall breakouts. Finally，the possible problems encountered in the borehole breakouts measurement using stereo pair imaging technique are discussed. The conclusions of this paper show that borehole stereo pair imaging technique has broken through the limitation that the conventional borehole camera system can only obtain two dimensional borehole wall images. Using borehole data obtained at any depth，the three-dimensional measurement of 360 degree wall shape is realized including three dimensional shape measurement of borehole wall breakouts. Borehole stereo pair imaging technique provides a new method for in-situ stress measurement of borehole breakouts.

Key words： rock mechanics borehole breakout method stereo pair borehole camera in-situ stress measurement three-dimensional borehole wall

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HAN Zengqiang
	WANG Chuanying
	ZOU Xianjian
	HU Sheng

Cite this article:

HAN Zengqiang,WANG Chuanying,ZOU Xianjian, et al. Discussion for application of stereo pair imaging technique in borehole breakout method[J]. , 2018, 37(S2): 4177-4183.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2017.1192 OR https://rockmech.whrsm.ac.cn/EN/Y2018/V37/IS2/4177

[1]	AMADEI B，STEPHANSSON O. Rock stress and its measurement[M].[S.l.]：Centek Publishers，1986：95-116.
[2]	ZOBACK M D，DANIEL M，LARRY M，et al. Well bore breakouts and in situ stress[J]. Journal of Geophysical Research Atmospheres，1985，90(90)：5523-5530.
[3]	LEEMAN E R. The measurement of stress in rock[J]. Journal of the Southern African Institute of Mining and Metallurgy，1964，65(12)：656-664.
[4]	GOUGH D I，BELL J S. Stress orientations from borehole wall fractures with examples from Colorado，east Texas，and northern Canada[J]. Canadian Journal of Earth Sciences，1982，19(7)：1358-1370.
[5]	蔡美峰，乔兰，李华斌. 地应力测量原理和技术[M]. 北京：科学出版社，1995：13-16.(CAI Meifeng. The principle and technology of in-situ stress measurement[M]. Beijing：Science Press，1995：13-16.(in Chinese))
[6]	HAIMSON B C. Borehole breakouts in berea sandstone reveal a new fracture mechanism[J]. Pure and Applied Geophysics，2003，160(5)：813-831.
[7]	翟玉树. 对孔壁崩落预测地应力方法的评价[J]. 河南理工大学学报：自然科学版，2011，30(6)：662-667.(ZHAI Yushu. Evaluation on methods of predicting in-situ stresses by using borehole breakout[J]. Journal of Henan Polytechnic University：Natural Science，2011，30(6)：662-667.(in Chinese))
[8]	尤明庆. 统一强度理论应用于岩石的讨论[J]. 岩石力学与工程学报，2013，32(2)：258-265.(YOU Mingqing. Discussion on unified strength theories for rocks[J]. Chinese Journal of Rock Mechanics and Engineering，2013，32(2)：258-265.(in Chinese))
[9]	丁健民，梁国平，郭启良. 孔壁崩落应力测量——根据超声波电视测井资料确定地壳应力方向[J]. 地质力学学报，1989，(2)：203-209.(DING Jianmin，LIANG Guoping，GUO Qiling. Use of borehole breakouts in crustal stress measurement：stress orientation determined from ultrasonic borehole televiewer log data[J]. Bulletin of the Institute of Geomechanics CAGS，1989，(2)：203-209.(in Chinese))
[10]	毛吉震，陈群策，王成虎. 超声波钻孔电视在地应力测量研究中的应用[J]. 岩土工程学报，2008，30(1)：46-50.(MAO Jizhen，CHEN Qunce，WANG Chenghu. Application of acoustic borehole televiewer to measurement of in-situ stress[J]. Chinese Journal of Geotechnical Engineering，2008，30(1)：46-50.(in Chinese))
[11]	葛修润，侯明勋. 三维地应力 BWSRM测量新方法及其测井机器人在重大工程中的应用[J]. 岩石力学与工程学报，2011，38(11)： 2 161-2 180.(GE Xiurun，HOU Mingxun. A new 3D in-situ rock stress measuring method：Borehole wall stress relief method (BWSRM) and development of geostress measuring instrument based on BWSRM and its primary applications to engineering[J]. Chinese Journal of Rock Mechanics and Engineering，2011，38(11)：2 161-2 180.(in Chinese))
[12]	王川婴，韩增强，汪进超，等. 平面应力状态下的圆孔形态特征研究[J]. 岩石力学与工程学报，2016，35(增1)：2836-2842.(WANG Chuanying，HAN Zengqiang，WANG Jinchao，et al. Study of borehole geometric shape features under plane stress state[J]. Chinese Journal of Rock Mechanics and Engineering，2016，35(Supp.1)：2836-2842.(in Chinese))
[13]	PLUMB R A，HICKMAN S H. Stress-induced borehole elongation：A comparison between the four-arm dipmeter and the borehole televiewer in the Auburn Geothermal Well[J]. Journal of Geophysical Research Solid Earth，1985，90(B7)：5513-5521.
[14]	MORIN R H，NEWMARK R L，BARTON C A，et al. State of lithospheric stress and borehole stability at deep sea drilling project site 504B，eastern equatorial Pacific[J]. Journal of Geophysical Research Atmospheres，1990，95(B6)：9293-9303.
[15]	王川婴，邹先坚，韩增强. 基于双锥面镜成像的钻孔摄像系统研究[J].岩石力学与工程学报，2017，36(9)：2 185-2 193.(WANG Chuanying，ZOU Xianjian，HAN Zengqiang. Study of borehole camera system based on biconical mirror imaging technology[J]. Chinese Journal of Rock Mechanics and Engineering，2017，36(9)： 2 185-2 193.(in Chinese))