[1] 何满潮，景海河，孙晓明. 软岩工程力学[M]. 北京：科学出版社，2002.(HE Manchao，JING Haihe，SUN Xiaoming. Soft rock engineering mechanics[M]. Beijing：Science Press，2002.(in Chinese))

[2] 蔡美峰，何满潮，刘东燕. 岩石力学与工程[M]. 北京：科学出版社，2002.(CAI Meifeng，HE Manchao，LIU Dongyan. Rock mechanics and engineering[M]. Beijing：Science Press，2002.(in Chinese))

[3] 杨永兵. 边坡岩石强度与岩体强度的工程变换[J]. 金属矿山，2004，(9)：10–12.(YANG Yongbing. Engineering conversion of strength between slope rock and rock mass[J]. Metal Mine，2004，(9)：10–12.(in Chinese))

[4] AKSOY C O，ONARGAN T，YENICE H，et al. Determining the stress and convergence at Beypazaritrona field by three-dimensional elasto-plastic finite element analysis：a case study[J]. International Journal of Rock Mechanics and Mining Sciences，2006，43(2)：166–178.

[5] ZHU W C，LIU J，SHENG J C，et al. Analysis of coupled gas flow and deformation process with desorption and Klinkenberg effects in coal seams[J]. International Journal of Rock Mechanics and Mining Sciences，2007，44(7)：971–980

[6] YU X，ZHOU Y F，PENG S Z. Stability analysis of dam abutments by 3D elasto-plastic finite element method：a case study of Houhe gravity-arch dam in China[J]. International Journal of Rock Mechanics and Mining Sciences，2005，42(3)：415–430.

[7] DHAWAN K R，SINGH D N，GUPTA I D，et al. 2D and 3D finite element analysis of underground openings in an inhomogeneous rock mass[J]. International Journal of Rock Mechanics and Mining Sciences，2002，39(2)：217–227.

[8] DENG J，YUE Z Q，THAM L G，et al. Pillar design by combining finite element methods，neural networks and reliability：a case study of the Fenghuangshan copper mine，China[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(4)：585–599.

[9] 李夕兵，李地元，郭  雷，等. 动力扰动下深部高应力矿柱力学响应研究[J]. 岩石力学与工程学报，2007，26(5)：922–928.(LI Xibing，LI Diyuan，GUO Lei，et al. Study on mechanical response of highly-stressed pillars in deep mining under dynamic disturbance[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(5)：922–928.(in Chinese))

[10] MERCER R A，BAWDEN W F. A statistical approach for the integrated analysis of mine-induced seismicity and numerical stress estimates，a case study part I：developing the relations[J]. International Journal of Rock Mechanics and Mining Sciences，2005，42(1)：     47–72.

[11] MERCER R A，BAWDEN W F. A statistical approach for the integrated analysis of mine induced seismicity and numerical stress estimates，a case study—part II：evaluation of the relations[J]. International Journal of Rock Mechanics and Mining Sciences，2005，42(1)：73–94.

[12] BRUNEAUA G，TYLERB D B，HADJIGEORGIOUA J，et al. Influence of faulting on a mine shaft—a case study：part I—background and instrumentation[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(1)：95–112.

[13] BRUNEAUA G，HUDYMAB M R，HADJIGEORGIOUA J，et al. Influence of faulting on a mine shaft—a case study：part II—numerical modelling[J]. International Journal of Rock Mechanics and Mining Sciences，2003，40(1)：113–125.

[14] QUESADA D，PICARD D，PUTOT C，et al. The role of the interbed thickness on the step-over fracture under overburden pressure[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(2)：281–288.

[15] ABDUL-WAHED M K，AL HEIB M，SEFAUTE G. Mining induced seismicity：seismic measurement using multiplet approach and numerical modeling[J]. International Journal of Coal Geology，2006，66(1/2)：137–147.

[16] GUO H，ADHIKARY D P，CRAIG M S. Simulation of mine water inflow and gas emission during longwall mining[J]. Rock Mechanics and Rock Engineering，2009，42(1)：25–51.