基于能量法的近距煤层巷道合理位置确定

doi:10.13722/j.cnki.jrme.2015.0862

Abstract
Figure/Table
References (12)
Related Citation (15)

Download: PDF (2034 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Due to the stress concentration of coal pillar arranged in the upper coal seam during the extraction of closed coal seam，the accumulated energy in coal pillar could induce coal bump in the mining face and roadway if the position of roadway was unreasonably arranged and designed. Based on the geological condition of No.2 coal mining in Anjialing，the physical model was established to determine the energy release in coal pillar during extraction of closed coal seam and investigate the reasonable position of mining roadway in the under coal seam. It was suggested from the physical model and field test that degree of energy release during the extraction of under coal seam was greater than that of upper coal seam. The reason was that the stress concentration of coal pillar induced by the movement of overlying rock strata was serious during the extraction of under coal seam. The physical model revealed that the reasonable distance between roadway and coal pillar was approximate greater than 8 m. The field test results obtained from roadway displacement and the geological radar suggested that the roadway was stable when the reasonable distance was greater than 8 m.

Key words： mining engineering closed coal seam strain energy coal pillar mining roadway field monitoring

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Hongwei1
	2
	JIANG Yaodong1
	2
	ZHAO Yixin1
	2
	WANG Tao1
	YANG Tian1
	NING Taohong1

Cite this article:

WANG Hongwei1,2,JIANG Yaodong1, et al. DETERMINATION OF REASONABLE ROADWAY POSITION DURING EXTRACTION OF CLOSED COAL SEAM BASED ON ENERGY THEORY[J]. , 2015, 34(S2): 4023-4029.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2015.0862 OR https://rockmech.whrsm.ac.cn/EN/Y2015/V34/IS2/4023

[1] 张百胜，杨双锁，康立勋，等. 极近距离煤层回采巷道合理位置确定方法探讨[J]. 岩石力学与工程学报，2008，27(1)：97–101. (ZHNAG Baisheng，YANG Shuangsuo，KANG Lixun，et al. Discussion on method for determining reasonable position of roadway for ultra-close multi-seam[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(1)：97–101.(in Chinese))

[2] 严国超，胡耀青，宋选民，等. 极近距离薄煤层群联合开采常规错距理论与物理模拟[J]. 岩石力学与工程学报，2009，28(3)：591–597.(YAN Guochao，HU Yaoqing，SONG Xuanmin，et al. Theory and physical simulation of conventional staggered distance during combined mining of ultra-close thin coal seam group[J]. Chinese Journal of Rock Mechanics and Engineering，2009，28(3)：591–597. (in Chinese))

[3] 张炜，张东盛，陈建本，等. 极近距离煤层回采巷道合理位置确定[J]. 中国矿业大学学报，2012，41(2)：182–188.(ZHANG Wei，ZHANG Dongsheng，CHEN Jianben，et al. Determining the optimum gateway location for extremely close coal seams[J]. Journal of China University of Mining and Technology，2012，41(2)：182–188.(in Chinese))

[4] 姜耀东，赵毅鑫，刘文岗，等. 煤岩冲击失稳的机制和实验研究[M]. 北京：科学出版社，2009：2–27.(JIANG Yaodong，ZHAO Yixin，LIU Wengang，et al. Investigation on the mechanism of coal bump and relation experiments[M]. Beijing：Science Press，2009：2–27.(in Chinese))

[5] 赵毅鑫，姜耀东，田素鹏. 冲击地压形成过程中能量耗散特征研究[J]. 煤炭学报，2010，35(12)：1 979–1 983.(ZHAO Yixin，JIANG Yaodong，TIAN Supeng. Investigation on the characteristics of energy dissipation in the preparation process of coal bumps[J]. Journal of China Coal Society，2010，35(12)：1 979–1 983.(in Chinese))

[6] 谢和平，鞠杨，黎立云. 基于能量耗散与释放原理的岩石强度与整体破坏准则[J]. 岩石力学与工程学报，2005，24(17)：3 003–3 010. (XIE Heping，JU Yang，LI Liyun. Criteria for strength and structural failure of rocks based on energy dissipation and energy release principles[J]. Chinese Journal of Rock Mechanics and Engineering，2005，24(17)：3 003–3 010.(in Chinese))

[7] 谢和平，彭瑞东，鞠杨. 岩石变形破坏过程中的能量耗散分析[J]. 岩石力学与工程学报，2004，23(21)：3 565–3 570.(XIE Heping，PENG Ruidong，JU Yang. Energy dissipation of rock deformation and fracture[J]. Chinese Journal of Rock Mechanics and Engineering，2004，23(21)：3 565–3 570.(in Chinese))

[8] 姜福兴，杨淑华，XUN L. 微地震监测揭示的采场围岩空间破裂形态[J]. 煤炭学报，2003，28(4)：357–360.(JIANG Fuxin，YANG Shuhua，XUN Luo. Spatial fracturing progresses of surrounding rock masses in longwall face monitored by microseismic monitoring techniques[J]. Journal of China Coal Society，2003，28(4)：357–360.(in Chinese))

[9] 窦林名，何烨，张卫东. 孤岛工作面冲击矿压危险及其控制[J]. 岩石力学与工程学报，2003，22(11)：1 866–1 869.(DOU Linming，HE Ye，ZHANG Weidong. Hazards of rock burst in island coal face and its control[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(11)：1 866–1 869.(in Chinese))

[10] 王家臣，杨胜利，杨宝贵，等. 长壁矸石充填开采上覆岩层移动特征模拟实验[J]. 煤炭学报，2012，37(8)：1 256–1 262.(WANG Jiacheng，YANG Shengli，YANG Baogui，et al. Simulation experiment of overlying strata movement features of longwall with gangue backfill mining[J]. Journal of China Coal Society，2012，37(8)：1 256–1 262. (in Chinese))

[11] 徐芝纶. 弹性力学[M]. 北京：高等教育出版社，2006：257–260.(XU Zhilun. Elasticity mechanics[M]. Beijing：Higher Education Press，2006：257–260.(in Chinese))

[12] 赵毅鑫，姜耀东，张科学，等. 基于扰动状态理论的回采巷道稳定性分析[J]. 中国矿业大学学报，2014，43(2)：233–240.(ZHAO Yixin，JIANG Yaodong，ZHANG Kexue，et al. Analysis of gateroad stability in underground coal mining based on disturbed state theory[J]. Journal of China University of Mining and Technology，2014，43(2)：233–240.(in Chinese))