基于八叉树的储层改造体积计算方法及工程应用

doi:10.13722/j.cnki.jrme.2018.1067

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (655 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract There exists a large error in conventional stimulated reservoir volume (SRV) calculation method which adopts relatively regular shapes to build 3D envelop. An integrated methodology that utilizes the octree method to generate irregular tree mesh structure according to the density of microseismic events was presented，in which the stimulated reservoir volume is obtained by summing up the volumes of non-empty nodes in the tree structure. The method was validated by analog events generated by Monte Carlo simulation and application of eighteen wells of Kunbei oilfield. It was found that the octree method can be used to envelop the event cloud perfectly and eliminate effectively enough the error of unresponsive zones during microseismic monitoring. The octree method fully considers the impact of event density on SRV calculation in different monitoring areas and determines hierarchies of tree structure according to local event density. Hence，the calculation result conforms to engineering knowledge. Engineering applications show that the method has a high computational efficiency for large scale microseismic data，and that the calculated SRVs are consisted with the daily liquid production of 18 wells in Kunbei oilfield. Compared with the conventional approach，the developed method provides a more reliable quantitative index for hydraulic fracturing evaluation.

Key words： petroleum engineering octree method stimulated reservoir volume(SRV) microseismic monitoring hydraulic fracturing

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Xing1
	2
	JIN Yan1
	2
	LIN Botao1
	2
	LIN Changqing3
	XIE Lin3

Cite this article:

LIU Xing1,2,JIN Yan1, et al. A calculation method of the stimulated reservoir volume based on octree and its engineering application[J]. , 2019, 38(5): 948-955.

URL:

http://www.rockmech.org/EN/10.13722/j.cnki.jrme.2018.1067 OR http://www.rockmech.org/EN/Y2019/V38/I5/948

[8]	赵向东，陈波. 微地震工程应用研究[J]. 岩石力学与工程学报，2002，21(增2)：2 609–2 612.(ZHAO Xiangdong，CHEN Bo. Study of microseismic engineering applications[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(Supp.2)：2 609–2 612.(in Chinese))
[15]	SHAO Y，HUANG X，XING Y. An integrated study on the sensitivity and uncertainty associated with the evaluation of stimulated reservoir volume (SRV)[J]. Journal of Petroleum Science and Engineering，2017，159：903–914.
[18]	DíAZ-MáS L，MADRID-CUEVAS F J，MU?OZ-SALINAS R，et al. An octree-based method for shape from inconsistent silhouettes[J]. Pattern Recognition，2012，45(9)：3 245–3 255.
[21]	黄源，达飞鹏，唐林. 基于改进八叉树的三维点云压缩算法[J]. 光学学报，2017，37(12)：133–141.(HUANG Yuan，DA Feipeng，TANG Lin. Three-dimensional point cloud compression algorithm based on improved octree[J]. Acta Potica Sinica，2017，37(12)：133–141.(in Chinese))
[23]	ALGHALANDIS Y F，XU C，DOWD P A. A general framework for fracture intersection analysis：algorithms and practical applications[C]// Australian Geothermal Energy Conference. Melbourne：[s. n.]，2011：15–20.
[1]	FISHER M K，HEINZE J R，HARRIS C D，et al. Optimizing horizontal completion techniques in the Barnett shale using microseismic fracture mapping[C]// SPE Annual Technical Conference and Exhibition. [S. l.]：Society of Petroleum Engineers，2004：1–11.
[3]	吴奇，胥云，王腾飞，等. 增产改造理念的重大变革——体积改造技术概论[J]. 天然气工业，2011，31(4)：7–12.(WANG Tengfei，WANG Xiaoquan，et al. The revolution of reservoir stimulation：An introduction of volume fracturing[J]. Natural Gas Industry，2011，31(4)：7–12.(in Chinese))
[5]	URBANCIC T I，SHUMILA V，RUTLEDGE J T，et al. Determining hydraulic fracture behavior using microseismicity[C]// The 37th US Symposium on Rock Mechanics (USRMS). [S. l.]：American Rock Mechanics Association，1999：991–997.
[7]	MAXWELL S C，URBANCIC T I，STEINSBERGER N，et al. Microseismic imaging of hydraulic fracture complexity in the Barnett shale[C]// SPE Annual Technical Conference and Exhibition. [S. l.]：Society of Petroleum Engineers，2002.
[11]	BING HOU，RUXIN ZHANG，YIJIN ZENG，et al. Analysis of hydraulic fracture initiation and propagation in deep shale formation with high horizontal stress dierence[J]. Journal of Petroleum Science and Engineering，2018，170：231–243.
[13]	XIE J，YANG C，GUPTA N，et al. Integration of shale-gas-production data and microseismic for fracture and reservoir properties with the fast marching method[J]. SPE Journal，2015，20(0=2)：347–359.
[6]	FISHER M K，WRIGHT C A DAVIDSON B M，et al. Integrating fracture mapping technologies to optimize stimulations in the Barnett Shale[C]// SPE Annual Technical Conference and Exhibition. [S. l.]：Society of Petroleum Engineers，2002.
[16]	MEAGHER D. Geometric modeling using octree encoding[J]. Computer graphics and image processing，1982，19(2)：129–147.
[2]	WARPINSKI N R，MAYERHOFER M J，VINCENT M C，et al. Stimulating unconventional reservoirs：maximizing network growth while optimizing fracture conductivity[J]. Journal of Canadian Petroleum Technology，2009，48(10)：39–51.
[4]	陈作，薛承瑾，蒋廷学，等. 页岩气井体积压裂技术在我国的应用建议[J]. 天然气工业，2010，30(10)：30–32.(CHEN Zuo，XUE Chengjin，JIANG Tingxue，et al. Proposals for the application of fracturing by stimulated reservoir volume (SRV) in shale gas wells in China[J]. Natural Gas Industry，2010，30(10)：30–32.(in Chinese))
[9]	郭建春，尹建，赵志红. 裂缝干扰下页岩储层压裂形成复杂裂缝可行性[J]. 岩石力学与工程学报，2014，33(8)：1 589–1 596.GUO Jianchun，YIN Jian，ZHAO Zhihong. Feasibility of formation of complex fractures under cracks interference in shale reservoir fracturing[J]. Chinese Journal of Rock Mechanics and Engineering，2014，33(8)：1 589–1 596.(in Chinese))
[10]	BING HOU，RUXIN ZHANG，MIAN CHEN，et al. Investigation on acid fracturing treatment in limestone formation based on true triaxial experiment[J]. Fuel，2018，235：473–484.
[12]	MAYERHOFER M J，LOLON E，WARPINSKI N R，et al. What is stimulated reservoir volume?[J]. SPE Production and Operations，2010，25(1)：89–98.
[14]	YU G，AGUILERA R. 3D analytical modeling of hydraulic fracturing stimulated reservoir volume[C]// SPE Latin America and Caribbean Petroleum Engineering Conference. [S. l.]：Society of Petroleum Engineers，2012：1–17.
[19]	SU Y T，BETHEL J，HU S. Octree-based segmentation for terrestrial LiDAR point cloud data in industrial applications[J]. ISPRS Journal of Photogrammetry and Remote Sensing，2016，113：59–74.
[17]	YAMAGUCHI K，KUNII T L，FUJIMURA K，et al. Octree-related data structures and algorithms[J]. IEEE Computer Graphics and Applications，1984，4(1)：53–59.
[20]	王育坚，廉腾飞，吴明明，等. 基于八叉树与 KD 树索引的点云配准方法[J]. 测绘工程，2017，(8)：35–40.(WANG Yujian，LIAN Tengfei，WU Mingming，etal. Point cloud registration based on octree and KD-tree index[J]. Engineering of Surveying and Mapping，2017，(8)：35–40.(in Chinese))
[22]	ALGHALANDIS Y F. ADFNE：Open source software for discrete fracture network engineering，two and three-dimensional applications[J]. Computers and Geosciences，2017，10：1–11.