坚硬顶板水射流预制缝槽定向预裂防冲技术试验

doi:10.13722/j.cnki.jrme.2020.1056

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (850 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Most of rock bursts in China are closely related to the hard roof overlying coal seams. In order to improve the effect of presplitting and pressure relief of the hard roof，a directional presplitting and pressure relief method of water jet prefabricated slot of the hard roof was proposed. Aiming at a sandstone roof，the rock was cut by high pressure water jet in the laboratory，and the characteristic index values of the fracture groove，such as the depth，the width and the erosion volume of the rock under different hydraulic parameters，were measured. The field test was also carried out. The results show that the depth，the width and the erosion volume of rock slot characteristic indexes are positively correlated with the jet pressure，the nozzle diameter and the repeated cutting times，while negatively correlated with the transverse velocity of the nozzle. The characteristic index of the rock slot first increases and then decreases with increasing the target distance，and the optimal target distance is 5d. In the four level orthogonal experiment，five key factors affecting the optimization of pressure relief of the seam slot are the nozzle moving speed，the repeated cutting times，the jet pressure，the nozzle diameter and the target distance. Through selecting parameters based on the laboratory research rules，the underground experimental research on high-pressure water jet cutting of a roof was carried out. It is revealed that，for the roof rock with an uniaxial compressive strength of 68 MPa，the cutting radius is 10 times higher than that of the traditional cutting tool and the fracture initiation pressure is reduced. Under the guidance of the energy accumulation of the roof rock water jet prefabricated joint，the maximum single fracturing radius can reach 15 m，and the effect of anti-impact and pressure relief is good.

Key words： mining engineering rock burst high pressure water jet hard roof cutting slot directional hydrofracture

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	PAN Junfeng1
	2
	3
	MA Wentao1
	2
	3
	LIU Shaohong1
	2
	3
	GAO Jiaming1
	2
	3

Cite this article:

PAN Junfeng1,2,3, et al. A prevention technology of rock burst based on directional presplitting of water jet prefabricated slot in hard roof#br#[J]. , 2021, 40(8): 1591-1602.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2020.1056 OR https://rockmech.whrsm.ac.cn/EN/Y2021/V40/I8/1591

[1]	潘一山，李忠华，章梦涛. 我国冲击地压分布、类型、机制及防治研究[J]. 岩石力学与工程学报，2003，22(11)：1 844-1 851.(PAN Yishan，LI Zhonghua，ZHANG Mengtao. Distribution，type，mechanism and prevention of rockburst in China[J]. Chinese Journal of Rock Mechanics and Engineering，2003，22(11)：1 844-1 851.(in Chinese))
[2]	潘俊锋，宁宇，毛德兵，等. 煤矿开采冲击地压启动理论[J]. 岩石力学与工程学报，2012，31(3)：586-596.(PAN Junfeng，NING Yu，MAO Debing，et al. Theory of rockburst start-up during coal mining[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(3)：586-596.(in Chinese))
[3]	鞠文君，郑建伟，魏东，等. 急倾斜特厚煤层多分层同采巷道冲击地压成因及控制技术研究[J]. 采矿与安全工程学报，2019，36(2)：280-289.(JU Wenjun，ZHENG Jianwei，WEI Dong，et al. Study on the cause and control technology of rockburst in multi-layer and simultaneous mining roadway of steep and extra thick coal seam[J]. Journal of Mining and Safety Engineering，2019，36(2)：280-289.(in Chinese))
[4]	齐庆新，窦林名. 冲击地压理论与技术[M]. 徐州：中国矿业大学出版社，2008：32-38.(QI Qingxin，DOU Liming. Rock burst theory and technology[M]. Xuzhou：China University of mining and Technology Press，2008：32-38.(in Chinese))
[5]	谭云亮，张明，徐强，等．坚硬顶板型冲击地压发生机制及监测预警研究[J]. 煤炭科学技术，2019，47(1)：166-172.(TAN Yunliang，ZHANG Ming，XU Qiang，et al. Study on occurrence mechanism and monitoring and early warning of rock burst caused by hard roof[J]. Coal Science and Technology，2019，47(1)：166-172.(in Chinese))
[6]	宋彦波. 顶板预裂法留巷技术[J]. 采矿与安全工程学报，1997，(3)：156-157.(SONG Yanbo. Roadway retaining technology by roof presplitting method[J]. Journal of Mining and Safety Engineering，1997，(3)：156-157.(in Chinese))
[7]	PAL ROY P，SAWMLIANA C，BHAGAT N K，et al. Induced caving by blasting：innovative experiments in blasting gallery panels of underground coal mines of India[J]. Mining Technology，2003，112(1)：57-63.
[8]	KUMAR M，GHOSH P K，SINGH A K. Management of hard roof under Indian geo-mining condition[J]. Journal of Mines，Metal and Fuels，2003，51(3)：143-146.
[9]	齐庆新，雷毅，李宏艳，等. 深孔断顶爆破防治冲击地压的理论与实践[J]. 岩石力学与工程学报，2007，26(增1)：3 522-3 527.(QI Qingxin，LEI Yi，LI Hongyan，et al. Theory and application of prevention of rock burst by break-tip blast in deep hole[J]. Chinese Journal of Rock Mechanics and Engineering，2007，26(Supp.1)：3 522-3 527.(in Chinese))
[10]	冯彦军. 煤矿坚硬难垮顶板水力压裂裂缝扩展机制研究及应用[博士学位论文][D]. 北京：煤炭科学研究总院，2013.(FENG Yanjun. Research and application of hydraulic fracturing crack propagation mechanism in hard and difficult roof of coal mine[Ph. D. Thesis][D]. Beijing：General Research Institute of Coal Science，2013.(in Chinese))
[11]	康红普，冯彦军. 煤矿井下水力压裂技术及在围岩控制中的应用[J]. 煤炭科学技术，2017，45(1)：1-9.(KANG Hongpu，FENG Yanjun. Hydraulic fracturing technology and its applications in strata control in underground coal mines[J]. Coal Science and Technology，2017，45(1)：1-9.(in Chinese))
[12]	李瑞楼，王宁，王珑. 近距离煤层工作面坚硬顶板水力压裂应用研究[J]. 中国矿业，2020，29(增2)：303-307.(LI Ruilou，WANG Ning，WANG long. Study on hydraulic fracturing of hard roof in close distance coal seam working face[J]. China Mining，2020，29(Supp.2)：303-307.(in Chinese))
[13]	秦江波. 赵庄煤矿井下顶板水力压裂技术的应用研究[J]. 山东煤炭科技，2020，(9)：185-186.(QIN Jiangbo. Application Research on hydraulic fracturing technology of underground roof in Zhaozhuang Coal Mine[J]. Shandong Coal Science and Technology，2020，(9)：185-186.(in Chinese))
[14]	陈灿，刘贤，肖洪天. 塔山煤矿坚硬顶板水力压裂裂缝扩展规律研究[J]. 矿业研究与开发，2020，40(9)：75-80.(CHEN Can，LIU Xian，XIAO Hongtian. Study on fracture propagation law of hydraulic fracturing in hard roof of Tashan Coal Mine[J]. Mining Research and Development，2020，40(9)：75-80.(in Chinese))
[15]	孙健. 近距离煤层外错巷道顶板卸压机制及技术研究[J]. 煤炭工程，2019，51(增2)：151-154.(SUN Jian. Study on roof pressure relief mechanism and technology of external staggered roadway in close coal seam[J]. Coal Engineering，2019，51(Supp.2)：151-154.(in Chinese))
[16]	司瑞江，李飞鹏，赵璐璐，等. 区段大煤柱水力压裂切顶护巷技术研究[J]. 煤炭科学技术，2020，48(7)：282-287.(SI Ruijiang，LI Feipeng，ZHAO Lulu，et al. Study on hydraulic fracturing roof cutting and roadway protection technology of large coal pillar[J]. Coal Science and Technology，2020，48(7)：282-287.(in Chinese))
[17]	王振. 水力压裂切顶卸压技术在煤峪口矿8712工作面的应用研究[J]. 煤矿现代化，2020，(4)：28-31.(WANG Zhen. Research on Application of hydraulic fracturing roof cutting and pressure relief technology in coal mine 8712[J]. Coal Mine Modernization，2020，(4)：28-31.(in Chinese))