深部坚硬顶板充填工作面支架–围岩耦合作用与支护参数优化

doi:10.13722/j.cnki.jrme.2024.0130

Abstract
Figure/Table
References (0)
Related Citation (15)

Download: PDF (3230 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Backfilling mining is an effective method to reduce the mining pressure，rock movement and surface subsidence. To guide the selection of support parameters for the backfilling longwall face，taking the 1123 longwall panel of Gucheng coal mine as the background，theoretical analysis，physical simulation and on-site measurement are used to study the characteristics of rock movement under the conditions of backfilling mining with thick top coal and hard roof，to reveal the coupling relationship between the support and the surrounding rock，and to propose the optimization method of support parameters for backfilling face with thick top coal. The results show that the maximum height of mining-induced fractures under the support of backfilling body is located at the lower edge of the hard roof. The number of microseismic events in the roof is less than that in the floor，and the maximum height is 30 m. The roof load time series curve is dominated by the descending resistance type，and there is no periodic variation characteristics，indicating that the hard roof is characterised by continuous settlement. The settlement model of the hard roof is constructed and the settlement curve of“?”shape is obtained. The backfilling rate of the gob reaches 90%，and the movement mode of the hard roof changes from periodic fracture to continuous settlement type. Through uniaxial and triaxial compression experiments，combined with CT scans，it is found that after thick top coals loss restriction of the gob side，the internal fractures expand severely and the crushing coefficient increases，which reduces the backfilling ratio. A method for determining the support resistance in backfilling face is proposed. The interaction relationship between support and surrounding rock is analyzed from two aspects of stiffness coupling and strength coupling. Considering the stiffness and strength of thick top coal，the identification of support parameter optimization area is realized，and the optimization principle of support parameters of backfilling face is proposed. The resistance surface is divided into high sensitive area and low sensitive area，and it is proposed that the stiffness should be selected in the high sensitive area. The lower limit of the initial support force is the immediate roof and thick top coal load，and the upper limit value is the residual strength of thick top coal. The site industrial test of support parameters optimization of 1123 panel is carried out. It is found that the initial support force of 24 MPa exceeds the upper limit of support strength，which directly leads to the secondary breakage of thick top coal and the resistance reduction of support load time series curve. When the initial support force is reduced to 10 MPa，the load time series curve is transformed into a increase of resistance throughout the whole process，and the thick top coal in the roof control area is continuously settled. The secondary crushing and roof fall phenomenon are reduced，which significantly improves the backfilling mining efficiency.

Key words： mining engineering backfilling mining hard roof subsidence curve support-rock relation supporting parameter

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LI Meng1
	WANG Zhaohui1
	2
	SUN Wenchao1
	WU Chuanping1
	SUN Shaolong3
	CAO Peng4
	SUN Chenglei5

Cite this article:

LI Meng1,WANG Zhaohui1,2, et al. Support-rock interaction and supporting parameter optimization in deep backfilling longwall faces with hard roof[J]. , 2024, 43(11): 2753-2765.

URL:

https://rockmech.whrsm.ac.cn/EN/10.13722/j.cnki.jrme.2024.0130 OR https://rockmech.whrsm.ac.cn/EN/Y2024/V43/I11/2753

[1]	王家臣，许家林，杨胜利，等. 煤矿采场岩层运动与控制研究进展——纪念钱鸣高院士“砌体梁”理论40年[J]. 煤炭科学技术，2023，51(1)：80-94.(WANG Jiachen，XU Jialin，YANG Shengli，et al. Development of strata movement and its control in underground mining：In memory of 40 years of Voussoir Beam Theory proposed by Academician Minggao Qian[J]. Coal Science and Technology，2023，51(1)：80-94.(in Chinese))
[2]	张吉雄，张强，周楠，等. 煤基固废充填开采技术研究进展与展望[J]. 煤炭学报，2022，47(12)：4 167-4 181.(ZHANG Jixiong，ZHANG Qiang，ZHOU Nan，et al. Research progress and prospect of coal-based solid waste backfilling mining technology[J]. Journal of China Coal Society，2022，47(12)：4 167-4 181.(in Chinese))
[3]	张吉雄，李剑，安泰龙，等. 矸石充填综采覆岩关键层变形特征研究[J]. 煤炭学报，2010，35(3)：357-362.(ZHANG Jixiong，LI Jian，AN Tailong，et al. Deformation characteristics of key strata overburden by raw waste backfilling with fully-mechanized coal mining technology[J]. Journal of China Coal Society，2010，35(3)：357-362.(in Chinese))
[4]	常庆粮，周华强，柏建彪，等. 膏体充填开采覆岩稳定性研究与实践[J]. 采矿与安全工程学报，2011，28(2)：279-282.(CHANG Qingliang，ZHOU Huaqiang，BAI Jianbiao，et al. Stability study and practice of overlying strata with paste backfilling[J]. Journal of Mining and Safety Engineering，2011，28(2)：279-282.(in Chinese))
[5]	谢生荣，郜明明，陈冬冬，等. 充填开采采场球应力壳分布及演化规律研究[J]. 采矿与安全工程学报，2019，36(1)：16-23.(XIE Shengrong，GAO Mingming，CHEN Dongdong，et al. Study on the distribution and evolution characteristics of spherical stress shell in backfilling mining stope[J]. Journal of Mining and Safety Engineering，2019，36(1)：16-23.(in Chinese))
[6]	刘建功，赵家巍，李蒙蒙，等. 煤矿充填开采连续曲形梁形成与岩层控制理论[J]. 煤炭学报，2016，41(2)：383-391.(LIU Jiangong，ZHAO Jiawei，LI Mengmeng，et al. Continuous curved beam formation and strata control theory in coal backfill mining[J]. Journal of China Coal Society，2016，41(2)：383-391.(in Chinese))
[7]	刘建功，赵家巍. 固体充填开采顶板多跨超静定结构分析与充填支架控制作用研究[J]. 煤炭学报，2019，44(1)：85-93.(LIU Jiangong，ZHAO Jiawei. Study on the multi-span statically indeterminate structure of roof in solid filling mining and the controlling effect of backfilling hydraulic supports[J]. Journal of China Coal Society，2019，44(1)：85-93.(in Chinese))
[8]	左建平，周钰博，刘光文，等. 煤矿充填开采覆岩连续变形移动规律及曲率模型研究[J]. 岩土力学，2019，40(3)：1 097-1 104.(ZUO Jianping，ZHOU Yubo，LIU Guangwen，et al. Continuous deformation law and curvature model of rock strata in coal backfill mining[J]. Rock and Soil Mechanics，2019，40(3)：1 097-1 104.(in Chinese))
[9]	余伟健，冯涛，王卫军，等. 充填开采的协作支撑系统及其力学特征[J]. 岩石力学与工程学报，2012，31(增1)：2 803-2 813.(YU Weijian，FENG Tao，WANG Weijun，et al. Coordination support systems in mining with filling and mechanical behavior[J]. Chinese Journal of Rock Mechanics and Engineering，2012，31(Supp.1)： 2 803-2 813.(in Chinese))
[10]	李石林，冯涛，朱卓慧. “煤体-支柱(架)-胶结体”联合作用下顶板超静定梁模型[J]. 煤炭学报，2013，38(10)：1 735-1 741.(LI Shilin，FENG Tao，ZHU Zhuohui. Mechanical model of statically indeterminate beam of roof under the combined action of coal body，pillar (support) and cemented fill[J]. Journal of China Coal Society，2013，38(10)：1 735-1 741.(in Chinese))
[11]	孙春东，张东升，王旭锋，等. 超高水材料袋式长壁充填开采覆岩控制技术研究与应用[J]. 煤炭学报，2015，40(6)：1 313-1 319. (SUN Chundong，ZHANG Dongsheng，WANG Xufeng，et al. Study and application of overlying strata control technology in bag-type backfill longwall mining with super high-water content material[J]. Journal of China Coal Society，2015，40(6)：1 313-1 319.(in Chinese))
[12]	徐平，周跃进，张敏霞，等. 厚松散层薄基岩充填开采覆岩裂隙发育分析[J]. 采矿与安全工程学报，2015，32(4)：617-622.(XU Ping，ZHOU Yuejin，ZHANG Minxia，et al. Fracture development of overlying strata by backfill mining under thick alluvium and thin bedrock[J]. Journal of Mining and Safety Engineering，2015，32(4)：617-622.(in Chinese))
[13]	张鹏飞，赵同彬，马兴印，等. 矸石充填开采顶板裂隙分布及演化特征分析[J]. 岩石力学与工程学报，2022，41(5)：969-978. (ZHANG Pengfei，ZHAO Tongbin，MA Xingyin，et al. Analysis on crack distribution and evolution characteristics of gangue backfilled working face roof[J]. Chinese Journal of Rock Mechanics and Engineering，2022，41(5)：969-978.(in Chinese))
[14]	王家臣，杨胜利，杨宝贵，等. 长壁矸石充填开采上覆岩层移动特征模拟实验[J]. 煤炭学报，2012，37(8)：1 256-1 262.(WANG Jiachen，YANG Shengli，YANG Baogui，et al. Simulation experiment of overlying strata movement features of longwall with gangue backfill mining[J]. Journal of China Coal Society，2012，37(8)： 1 256-1 262.(in Chinese))
[15]	王家臣，杨胜利. 固体充填开采支架与围岩关系研究[J]. 煤炭学报，2010，35(11)：1 821-1 826.(WANG Jiachen，YANG Shengli. Research on support-rock system in solid backfill mining methods[J]. Journal of China Coal Society，2010，35(11)：1 821-1 826.(in Chinese))
[16]	黄鹏，张兴军，郭宇鸣，等. 充填体协同支架控顶效应研究[J].采矿与安全工程学报，2020，37(1)：128-135.(HUANG Peng，ZHANG Xingjun，GUO Yuming，et al. Study on control effect of roof based on backfilling body cooperating with support[J]. Journal of Mining and Safety Engineering，2020，37(1)：128-135.(in Chinese))
[17]	王方田，高翔，冯光明，等. 深部煤层超高水充填工作面充填体-支架-煤体协同承载机制[J]. 采矿与安全工程学报，2022，39(4)：663-673.(WANG Fangtian，GAO Xiang，FENG Guangming，et al. Synergistic bearing mechanism of backfilling body-support-coal body in deep super-high water backfilling working face[J]. Journal of Mining and Safety Engineering，2022，39(4)：663-673.(in Chinese))
[18]	张强，杨康，张吉雄，等. 固体充填开采直接顶位态控制机制及工程案例[J]. 中国矿业大学学报，2022，51(1)：35-45.(ZHANG Qiang，YANG Kang，ZHANG Jixiong，et al. Immediate roof control mechanism in solid backfilling mining method and its engineering case[J]. Journal of China University of Mining and Technology，2022，51(1)：35-45.(in Chinese))
[19]	张强，武中亚，杜二宝，等. 充填采煤液压支架工作阻力设计方法研究[J]. 采矿与安全工程学报，2020，37(1)：118-127.(ZHANG Qiang，WU Zhongya，DU Erbao，et al. Working resistance design method of backfilling shield[J]. Journal of Mining and Safety Engineering，2020，37(1)：118-127.(in Chinese))