深井综放面沿空顺槽超前液压支架选型研究

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1931 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要支架选型是应用顺槽超前液压支架支护技术的关键。以新巨龙矿井1302工作面沿空顺槽超前液压支架选型为工程背景，分析沿空面侧向岩层结构与首采面的差异及综放面沿空顺槽支架–围岩关系。基于力矩平衡关系，建立确定沿空顺槽超前支护强度的力学模型，提出以岩层回转角为控制对象的观点；采用基本顶位态方程对沿空顺槽围岩变形进行预计，运用弹性力学理论计算煤柱及沿空顺槽实体帮的承载力，并以不发生“挤架”为原则，推导出基本顶的临界回转角为2.7°，沿空顺槽超前支护的临界强度为0.50 MPa，从而选择型号为ZTC30000/25/50的液压支架。最后，应用沿空顺槽表面位移观测结果，验证所选支架的合理性。研究结果对沿空顺槽超前支护强度的确定及支架选型具有参考意义。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：采矿工程, 综放面, 沿空顺槽, 超前液压支架, 选型, 变形预计

Abstract：Support selection is the key to application of advanced support technology with hydraulic support in gateways of coal face. Taking the selection of advanced hydraulic support in gob-side entry of working face 1302 in Xinjulong Mine as engineering background，the difference between the side strata structure of gob-side face and that of primary face is discussed；and the relationship between support and surrounding rock in gob-side entry of fully mechanized caving face is studied. Based on the moment equilibrium relations，mechanical model for determination of advance support strength in gob-side entry is established；and the viewpoint that strata rotary angle is the control object is proposed. Prediction of surrounding rock deformation of the gob-side entry is constructed by using displacement state equation of basic roof. Bearing capacities of coal pillar and solid side of the gob-side entry are calculated using the elastic mechanical theory. With the principle of squeeze nonoccurrence，the conclusions that the critical rotary angle of basic roof is 2.7°and the critical strength of advance support in the gob-side entry is 0.50 MPa are obtained. The advanced hydraulic support of ZTC30000/25/50 type is selected according to the results. Finally，the reasonableness of the support is verified by using observation result of surface displacement of the gob-side entry. The results can provide a reference for determination of reasonable strength of advanced support and support selection.

Key words： mining engineering fully mechanized caving face gob-side entry advanced hydraulic support selection deformation prediction

收稿日期: 2012-05-17

引用本文:

刘金海1，姜福兴1，孙广京2，卢诗祥2，张德飞2. 深井综放面沿空顺槽超前液压支架选型研究[J]. 岩石力学与工程学报, 2012, 31(11): 2232-2239.
LIU Jinhai1，JIANG Fuxing1，SUN Guangjing2，LU Shixiang2，ZHANG Defei2. SELECTION OF ADVANCED HYDRAULIC SUPPORT IN GOB-SIDE ENTRY OF FULLY MECHANIZED CAVING FACE OF DEEP MINE. , 2012, 31(11): 2232-2239.

链接本文:

https://rockmech.whrsm.ac.cn/CN/Y2012/V31/I11/2232

[1] 倪兴华，苗素军，杨永杰，等. 综放工作面端头及顺槽超前液压支架支护技术[M]. 北京：煤炭工业出版社，2008：2–4.(NI Xinghua，MIAO Sujun，YANG Yongjie，et al. Fully-mechanized coal mining face ends and gateways support technology with advanced pilothydraulic powered supports[M]. Beijing：China Coal Industry Publishing House，2008：2–4.(in Chinese)) [2] 王国法. 放顶煤液压支架与综采放顶煤技术[M]. 北京：煤炭工业出版社，2010：235–336.(WANG Guofa. Top-caving powered support and fully-mechanized caving technology[M]. Beijing：China Coal Industry Publishing House，2010：235–336.(in Chinese)) [3] 徐亚民. 付村煤矿综放工作面回采巷道超前支架支护实践[J]. 煤炭科学技术，2010，38(7)：35–37.(XU Yamin. Practices on support with pilothydraulic powered supports in mining gateway of fully mechanized coal mining face in Fucun mine[J]. Coal Science and Technology，2010，38(7)：35–37.(in Chinese)) [4] 张崇宏. 兖州矿区综放面端头及两巷超前液压支架研制与应用[J]. 煤矿开采，2010，15(3)：80–81.(ZHANG Chonghong. Development of application of head and advanced powered support in fully- mechanized caving face of Yanzhou mining area[J]. Mining Technology，2010，15(3)：80–81.(in Chinese)) [5] 朱泽阳，刘凤升，张有河. 工作面顺槽超前液压支架的研制及应用[J]. 水力采煤与管道运输，2002，(3)：20–23.(ZHU Zeyang，LIU Fengsheng，ZHANG Youhe. Development of application of advanced pilothydraulic powered supports used in gateways of coal face[J]. Hydraulic Coal Mining and Pipeline Transportation，2002，(3)：20–23.(in Chinese)) [6] 吕兵. 成庄矿综采工作面超前液压支架的设计[J]. 矿山机械，2011，39(8)：144–145.(LU Bing. Design of advanced pilothydraulic powered supports of fully-mechanized coal face in Chengzhuang mine[J]. Mining and Processing Equipment，2011，39(8)：144–145. (in Chinese)) [7] 曾明胜. 深部综放工作面巷道强力超前支护系统设计[J]. 煤炭科学技术，2011，39(6)：26–29.(ZENG Mingsheng. Design on powerful advance support system of mining gateway in fully mechanized top coal caving mining face in deep mine[J]. Coal Science and Technology，2011，39(6)：26–29.(in Chinese)) [8] 王国法，李前，赵志礼，等. 强矿压冲击工作面巷道冲击倾向性测试与超前支护系统研究[J]. 山东科技大学学报：自然科学版，2011，30(4)：1–9.(WANG Guofa，LI Qian，ZHAO Zhili，et al. The impact tendentiousness testing of working faces and roadways with strong rock burst and fore support system[J]. Journal of Shandong University of Science and Technology：Natural Science，2011，30(4)：1–9.(in Chinese)) [9] 杨永康，康天合，兰毅，等. 浅埋综放L工作面开采方法及其矿压实测研究[J]. 岩石力学与工程学报，2011，30(2)：244–253.(YANG Yongkang，KANG Tianhe，LAN Yi，et al. Study of mining method of L-shaped working face by fully-mechanized sublevel caving mining in shallow-buried thick coal seam and its underground pressure field observation[J]. Chinese Journal of Rock Mechanics and Engineering，2011，30(2)：244–253.(in Chinese)) [10] 孔令海，姜福兴，王存文. 特厚煤层综放采场支架合理工作阻力研究[J]. 岩石力学与工程学报，2010，29(11)：2 312–2 318.(KONG Linghai，JIANG Fuxing，WANG Cunwen. Study of reasonable working resistance of support in fully-mechanized sublevel caving face in extra-thick coal seam[J]. Chinese Journal of Rock Mechanics and Engineering，2010，29(11)：2 312–2 318.(in Chinese)) [11] 姜福兴，张兴民，杨淑华，等. 长壁采场覆岩空间结构探讨[J]. 岩石力学与工程学报，2006，25(5)：979–984.(JIANG Fuxing，ZHANG Xingmin，YANG Shuhua，et al. Discussion on overlying strata spatial structures of longwall in coal mine[J]. Chinese Journal of Rock Mechanics and Engineering，2006，25(5)：979–984.(in Chinese)) [12] 宋振骐. 实用矿山压力与控制[M]. 北京：中国矿业大学出版社，1988：94–95.(SONG Zhenqi. Practical ground pressure and control[M]. Beijing：China University of Mining and Technology Press，1988：94–95.(in Chinese)) [13] 徐芝纶. 弹性力学[M]. 北京：高等教育出版社，1990：354–355.(XU Zhilun. Elastic mechanics[M]. Beijing：Higher Education Press，1990：354–355.(in Chinese))