Large scale model test on the distribution characteristics of the prestressed field of end-anchored bolts
LIN Jian1，2，3，SHI Yao1，2，3，SUN Zhiyong1，2，3，WANG Zhengsheng1，2，3，CAI Jiafang1，2，3
(1. Coal Mining and Designing Department，Tiandi Science and Technology Co.，Ltd.，Beijing 100013，China；2. Coal Mining and Designing Branch，China Coal Research Institute，Beijing 100013，China；3. State Key Laboratory of Coal Resource High-efficiency Mining and Clean Utilization，China Coal Research Institute，Beijing 100013，China)
Abstract：A large scale field test bench for prestressed bolt was manufactured to study the distribution characteristics of the prestressed field around the end-anchored bolt. The results show that the distribution pattern of the prestressed field of a single anchor is similar to the shape of pomegranate. The stress contour surfaces vary gradually from dense to sparse，the stress values descend gradually and the distribution ranges enlarge gradually. Two concentration zones of compressive stresses form in the rock in the vicinity of the anchorage and a concentration zone of tensile stress forms near the anchor head. The distribution of the stress along the axis of the bolt is related to the distance between the measuring line and the anchor bolt. The variation of the stress along the horizontal direction is related to the distance between the measuring line and the surface of the model. Although the pre-loads are different，the stress field distributions are basically the same，but the distribution ranges of the stress contour surfaces change significantly.
林 健1，2，3，石 垚1，2，3，孙志勇1，2，3，王正胜1，2，3，蔡嘉芳1，2，3. 端部锚固锚杆预应力场分布特征的大型模型试验研究[J]. 岩石力学与工程学报, 2016, 35(11): 2237-2247.
LIN Jian1，2，3，SHI Yao1，2，3，SUN Zhiyong1，2，3，WANG Zhengsheng1，2，3，CAI Jiafang1，2，3. Large scale model test on the distribution characteristics of the prestressed field of end-anchored bolts. , 2016, 35(11): 2237-2247.
[1] 康红普. 煤矿预应力锚杆支护技术的发展与应用[J]. 煤矿开采， 2011，16(3)：25–30.(KANG Hongpu. Development and application of pre-stress anchored bolt[J]. Coal Mining Technology，2011，16(3)：25–30.(in Chinese))
[2] LANG T A. Notes on rock mechanics and engineering for rock construction[J]. University of California at Berkeley，1962，(1)：1 962–1 964.
[3] CARRANZA-TORRES C. Analytical and numerical study of the mechanics of rockbolt reinforcement around tunnels in rock masses[J]. Rock Mechanics and Rock Engineering，2009，42(2)：175–228.
[4] LANG T A. Theory and practice of rock bolting[J]. Transactions of the American Institute of Mining，Metallurgical and Petroleum Engineers，1961，220：333–348.
[5] 顾金才，沈 俊. 预应力锚杆加固范围研究[C]// 全国岩石力学数值计算与模型实验学术研讨会. [S. l.]：[s. n.]，1990：607–612.(GU Jincai，SHEN Jun. Study on the reinforcement of prestressed anchor bolt[C]// Nationwide Symposium on Numerical Calculation and Model Test of Rock Mechanics. [S. l.]：[s. n.]，1990：607–612.(in Chinese))
[6] 顾金才，沈 俊，陈安敏，等. 锚索预应力在岩体内引起的应变状态模型试验研究[J]. 岩石力学与工程学报，2000，19(增1)：917–921.(GU Jincai，SHEN Jun，CHEN Anmin，et al. Model testing study on strain distribution regularity in rock mass caused by prestressed anchorage cable[J]. Chinese Journal of Rock Mechanics and Engineering，2000，19(Supp.1)：917–921.(in Chinese))
[7] 康红普，姜铁明，高富强. 预应力在锚杆支护中的作用[J]. 煤炭学报，2007，32(7)：673–678.(KANG Hongpu，JIANG Tieming，GAO Fuqiang. Effect of pretensioned stress to rock bolting[J]. Journal of China Coal Society，2007，32(7)：673–678.(in Chinese))
[8] 康红普，姜铁明，高富强. 预应力锚杆支护参数的设计[J]. 煤炭学报，2008，33(7)：721–726.(KANG Hongpu，JIANG Tieming，GAO Fuqiang. Design for pretensioned rock bolting parameters[J]. Journal of China Coal Society，2008，33(7)：721–726.(in Chinese))
[9] 康红普，姜鹏飞，蔡嘉芳. 锚杆支护应力场测试与分析[J]. 煤炭学报，2014，39(8)：1 521–1 529.(KANG Hongpu，JIANG Pengfei，CAI Jiafang. Test and analysis on stress fields caused by rock bolting[J]. Journal of China Coal Society，2014，39(8)：1 521–1 529.(in Chinese))
[10] 林 健，王 洋，杨景贺，等. 单根锚杆不同工作载荷下支护应力场特征相似模拟研究[J]. 煤矿开采，2015，(5)：87–92.(LIN Jian，WANG Yang，YANG Jinghe，et al. Analogue simulation of supporting stress field characteristic of single anchored bolt under different working loads[J]. Coal Mining Technology，2015，(5)：87–92.(in Chinese))
[11] GUO X，MAO X，MA C，et al. Bolt support mechanism based on elastic theory[J]. International Journal of Mining Science and Technology，2013，23(4)：469–474.
[12] SHOWKATI A，MAAREFVAND P，HASSANI H. Stresses induced by post-tensioned anchor in jointed rock mass[J]. Journal of Central South University，2015，22(4)：1 463–1 476.
[13] RANJBARNIA M，FAHIMIFAR A，ORESTE P. A simplified model to study the behavior of pre-tensioned fully grouted bolts around tunnels and to analyze the more important influencing parameters[J]. Journal of Mining Science，2014，50(3)：533–548.
[14] 丁秀丽，盛 谦，韩 军. 预应力锚索锚固机制的数值模拟试验研究[J]. 岩石力学与工程学报，2002，21(7)：980–988.(DING Xiuli，SHENG Qian，HAN Jun. Numerical simulation testing study on reinforcement mechanism of prestressed anchorage cable[J]. Chinese Journal of Rock Mechanics and Engineering，2002，21(7)：980–988.(in Chinese))
[15] 王金华，康红普，高富强. 锚索支护传力机制与应力分布的数值模拟[J]. 煤炭学报，2008，33(1)：1–6.(WANG Jinhua，KANG Hongpu，GAO Fuqiang. Numerical simulation study on load transfer mechanisms and stress distribution characteristics of cable bolts[J]. Journal of China Coal Society，2008，33(1)：1–6.(in Chinese))
[16] 李 铀，白世伟，朱维申，等. 预应力锚索锚固效应的仿真试验与数值模拟研究[J]. 岩土力学，2004，25(增2)：260–264.(LI You，BAI Shiwei，ZHI Weishen，et al. Simulation test and numerical simulation of anchoring effect of priestesses cable[J]. Rock and Soil Mechanics，2004，25(Supp.2)：260–264.(in Chinese))
[17] 韦四江，李宝富. 预紧力锚杆作用下锚固体的形成与失稳模式[J].煤炭学报，2013，38(12)：2 126–2 132.(WEI Sijiang，LI Baofu. Anchor bolt body formation and instability mode under the influence of anchoring pretension[J]. Journal of China Coal Society，2013，38(12)：2 126–2 132.(in Chinese))
2016, Vol. 35 
