反倾角裂隙岩体压剪断裂及破碎特征研究

doi:10.13722/j.cnki.jrme.2017.1319

摘要
图/表
参考文献(28)
相关文章 (15)

全文: PDF (658 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要

为了研究反倾角裂隙对边坡岩体压剪断裂及破碎特征的影响，制备反倾角裂隙模型试件并对其进行压剪试验；同时，建立断裂力学数值模型计算裂隙尖端应力强度因子。此外，对这些试件压剪试验后的碎屑进行筛分试验，引入分形理论定量描述压剪破碎特征及其与断裂特征的相关性。研究结果表明：(1) 随着裂隙倾角数值的增大，试件抗剪强度总体呈先增大后减小的趋势；而裂隙尖端应力强度因子以及碎屑分形维数与裂隙倾角的变化规律正好相反。(2) 试件压剪破坏模式可分为I型(沿裂隙剪切型)、II型(互锁型)、III型(穿切裂隙剪切型)3类；对于I型破坏模式，裂隙尖端应力强度因子最高，导致抗剪强度最低；对于II型破坏模式，裂隙尖端应力强度因子最低，导致抗剪强度最高；对于III型破坏模式，裂隙尖端应力强度因子较低，导致抗剪强度较高。(3) 试件压剪试验后的碎屑尺度分布具有分形特征，分形维数位于2.06～2.59，在断层破碎带中也发现类似的结果；模型试件抗剪强度与对应的碎屑分形维数之间近似呈负线性相关关系，岩体压剪破碎特征与裂隙几何特征、应力状态以及断裂特征密切相关。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张科1
	2
	陈宇龙3
	程赫明2
	范文臣4

关键词 ：岩石力学, 反倾角裂隙, 压剪断裂, 抗剪强度, 应力强度因子, 破碎, 分形维数

Abstract：

In order to study how the compression-shear fracture and fragmentation characteristics of rock mass of slope is influenced by counter-inclined flaw，model specimens containing counter-inclined flaw were prepared and compression-shear tests were conducted. The numerical model of fracture mechanics was established to calculate the stress intensity factor of flaw tip. Sieve tests were carried out for the fragments of these specimens after compression-shear tests. The fractal theory was introduced to quantify the compression-shear fragmentation characteristics and its correlation with fracture characteristics was investigated. With the increase of the absolute value of flaw inclination，the shear strength of specimens increases first and then decreases，which breaches the trends of the stress intensity factor of flaw tip and the fractal dimension of fragmentation. The failure generated in the specimen can be classified into three modes，namely mode I(sliding along the flaw)，mode II(interlocking) and mode III(cutting through the flaw). The specimen failing in mode I，has a largest stress intensity factor of the flaw tip，resulting in a lowest stress strength. The specimen failing in mode II，has a lowest stress intensity factor of the flaw tip，resulting in a largest stress strength. The specimen failing in mode III，has an intermediate stress intensity factor of the flaw tip，resulting in a stress strength between those in modes I and II. The fragment size distribution of fragments under the compression-shear tests exhibits significant fractal property. The fractal dimensions of these fragmentations are in the range of 2.06 to 2.59，which is similar to those in the fault cores There exists negative correlation between the shear strength of specimen and the fractal dimension of fragmentation. The compression-shear fragmentation characteristics of rock mass are closely related to the flaw geometry，stress condition and fracture characteristics.

Key words： rock mechanics counter-inclined flaw compression-shear fracture shear strength stress intensity factor fragmentation fractal dimension

引用本文:

张科1，2，陈宇龙3，程赫明2，范文臣4. 反倾角裂隙岩体压剪断裂及破碎特征研究[J]. 岩石力学与工程学报, 2018, 37(S1): 3291-3299.
ZHANG Ke1，2，CHEN Yulong3，CHENG Heming2，FAN Wenchen4. Investigation on compression-shear fracture and fragmentation characteristics of rock mass containing counter-inclined flaw. , 2018, 37(S1): 3291-3299.

链接本文:

https://rockmech.whrsm.ac.cn/CN/10.13722/j.cnki.jrme.2017.1319 或 https://rockmech.whrsm.ac.cn/CN/Y2018/V37/IS1/3291

[1]	EBERHARDT E，STEAD D，COGGAN J S. Numerical analysis of initiation and progressive failure in natural rock slopes-the 1991 Randa rockslide[J]. International Journal of Rock Mechanics and Mining Sciences，2004，41(1)：69-87.
[2]	LAJTAI E Z. Brittle fracture in compression[J]. International Journal of Fracture，1974，10(4)：525-536.
[3]	李银平，王元汉，陈龙珠，等.含预制裂纹大理岩的压剪试验分析[J]. 岩土工程学报，2004，26(1)：120-124.(LI Yinping，WANGYuanhan，CHEN Longzhu，et al. Experiment research on pre-existingcracks in marble under compression[J]. Chinese Journal of GeotechnicalEngineering，2004，26(1)：120-124.(in Chinese))
[4]	YANG S Q，JING H W. Strength failure and crack coalescence behavior of brittle sandstonesamples containing a single fissure under uniaxial compression[J]. International Journal ofFracture，2011，168(2)：227-250.
[1]	BOBET A，EINSTEIN H H. Fracture coalescence in rock-type materials under uniaxial andbiaxial compression[J]. International Journal of Rock Mechanics and Mining Sciences，1998，35(7)：863-888.
[2]	HUANG D，GU D，YANG C，et al. Investigation on mechanical behaviors of sandstone with two preexisting flaws under triaxial compression[J]. Rock Mechanics andRock Engineering，2016，49(2)：375-399.
[3]	PARK C H，BOBET A. Crack coalescence in specimens with open and closed flaws: acomparison[J]. International Journal of Rock Mechanics and Mining Sciences，2009，46(5)：819-829.
[4]	刘远明，夏才初. 非贯通节理岩体直剪试验研究进展[J]. 岩土力学，2007，28(8)：1719-1724.(LIU Yuanming，XIA Caichu. Advancesin research of rock masses containing discontinuous joints in directshear test[J]. Rock and Soil Mechanics，2007，28(8)：1 719-1 724.(in Chinese))
[5]	LAJTAI E Z. Strength of discontinuous rocks in direct shear[J]. Geotechnique，1969，19(2)：218-233.
[1]	白世伟，任伟中，丰定祥，等. 共面闭合断续节理岩体强度特性直剪试验研究[J]. 岩土力学，1999，20(2)：10-16.(BAI Shiwei，REN Weizhong，FENG Dingxiang，et al. Research on the strength behavior of rock containing coplanar close intermittent joints by direct shear test[J]. Rock and Soil Mechanics，1999，20(2)：10-16.(in Chinese))
[2]	GHAZVINIAN A，SARFARAZI V，SCHUBERT W，et al. A study of the failure mechanism ofplanar non-persistent open joints using PFC2D[J]. Rock Mechanics and Rock Engineering，2012，45(5)：677-693.
[6]	GEHLE C，KUTTER H K. Breakage and shear behaviour of intermittent rock joints[J].International Journal of Rock Mechanics and Mining Sciences，2003，40(5)：687-700.
[7]	ZHANG H Q，ZHAO Z Y，TANG C A，et al. Numerical study of shear behavior of intermittent rock joints with different geometrical parameters[J]. International Journal of Rock Mechanics and Mining Sciences，2006，43(5)：802-816.
[8]	蒋明镜，孙亚，陈贺，等. 非贯通非共面节理岩体直剪试验DEM数值模拟[J]. 岩石力学与工程学报，2015，34(增2)：3 667-3 675.(JIANG Mingjing，SUN Ya，CHEN He，et al. DEM numerical simulation of rock massed containing non-coplanar intermittent joints in direct shear test[J]. Chinese Journal of Rock Mechanicsand Engineering，2015，34(Supp.2)：3 667-3 675.(in Chinese))
[9]	RAO Q，SUN Z，STEPHANSSON O，et al. Shear fracture(Mode II) of brittle rock[J].International Journal of Rock Mechanics and Mining Sciences，2003，40(3)：355-375.
[10]	吴立新，刘善军，吴育华，等. 遥感-岩石力学(IV)-岩石压剪破裂的热红外辐射规律及其地震前兆意义[J]. 岩石力学与工程学报，2004，23(4)：539-544.(WU Lixin，LIU Shanjun，WU Yuhua，et al. Remote sensing-rock mechanics(IV)—laws of thermal infraredradiation from compressively-sheared fracturing rock and itsmeanings for earthquake omens[J]. Chinese Journal of Rock Mechanicsand Engineering，2004，23(4)：539-544.(in Chinese))
[11]	赵洪宝，李华华，王中伟. 边坡潜在滑移面关键单元岩体裂隙演化特征细观试验与滑移机制研究[J]. 岩石力学与工程学报，2015，34(5)：935-944.(ZHAO Hongbao，LI Huahua，WANG Zhongwei. Experimental study on characteristics of micro-crack evolution at key place of potential slip surface of slopes[J]. Chinese Journal of RockMechanics and Engineering，2015，34(5)：935-944.(in Chinese))
[1]	ZHANG K，CAO P，MA G，et al. Strength, fragmentation and fractal propertiesof mixed flaws[J]. Acta Geotechnica，2016，11(4)：901-912.
[2]	谢和平. 分形-岩石力学导论[M]. 2版. 北京：科学出版社，2005：228-234.(XIE Heping. Fractal-rock mechanics induction[M]. 2nd ed.Beijing：Science Press，2005：228-234.(in Chinese))
[3]	夏元友，吝曼卿，廖璐璐，等. 大尺寸试件岩爆试验碎屑分形特征分析[J]. 岩石力学与工程学报，2014，33(7)：1358-1365.(XIAYuanyou，LIN Manqing，LIAO Lulu，et al. Large size rock burst testspecimen debris fractal characteristics[J]. Chinese Journal of RockMechanics and Engineering，2014，33(7)：1 358-1 365.(in Chinese))
[12]	邓涛，杨林德，韩文峰. 加载方式对大理岩碎块分布影响的试验研究[J]. 同济大学学报：自然科学版，2007，35(1)：10-14.(DENGTao，YANG Linde，HAN Wenfeng. Influence of loading form on distribution of marble fragments[J]. Journal of Tongji University：Natural Science，2007，35(1)：10-14.(in Chinese))
[13]	高峰，谢和平，赵鹏. 岩石块度分布的分形性质及细观结构效应[J]. 岩石力学与工程学报，1994，13(3)：240-246.(GAO Feng，XIE Heping，ZHAO Peng. Fractal properties of size frequency distribution of rock fragments and the influence of meso-structure[J].Chinese Journal of Rock Mechanics and Engineering，1994，13(3)：240-246.(in Chinese))
[14]	陈新，王仕志，李磊. 节理岩体模型单轴压缩破碎规律研究[J]. 岩石力学与工程学报，2012，31(5)：898-907.(CHEN Xin，WANGShizhi，LI Lei. Characteristics of fragments of jointed rock mass modelunder uniaxial compression[J]. Chinese Journal of Rock Mechanicsand Engineering，2012，31(5)：898-907.(in Chinese))
[15]	BRIDEAU M A，YAN M，STEAD D. The role of tectonic damage and brittle rock fracture in the development of large rock slope failures[J]. Geomorphology，2009，103(1)：30-49.
[16]	CROUCH S L. Solution of plane elasticity problems by the displacement discontinuity method. I. Infinite body solution[J]. International Journal for Numerical Methods in Engineering，1976，10(2)：301-343.
[17]	SHEN B，TEPHANSSON O，RINNE M. Modelling rock fracturing processes: a fracture mechanicsapproach using FRACOD[M]. Berlin：Springer，2014：19-32.
[18]	OLSON J E. Fracture mechanics analysis of joints and veins[Ph. D. Thesis][D]. Stanford：Stanford University，1991.
[19]	BILLI A，STORTI F. Fractal distribution of particle size in carbonate cataclastic rocks from the core of a regional strike-slip fault zone[J]. Tectonophysics，2004，384(1)：115-128.